PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Galileo >> PWS

Galileo Orbiter Jupiter PWS 80 kHz Wideband Waveform Data
GO-J-PWS-2-EDR-WAVEFORM-80KHZ-V1.0	PDS 3 CERTIFIED

Start Time: 1995-12-07 23:31:17 - Stop Time: 2002-11-05 14:35:21

Galileo Orbiter Jupiter PWS 80 kHz Wideband Waveform Data

Citiation Information

Title	Galileo Orbiter Jupiter PWS 80 kHz Wideband Waveform Data
Publisher	NASA Planetary Data System
doi	https://doi.org/10.17189/1519680

Top/ DATA/ C032091 /

80KHZ_0320910036

Start Time:	1995-341T16:34:19.106	Stop Time:	1995-341T16:34:43.106
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320910234

Start Time:	1995-341T16:36:19.106	Stop Time:	1995-341T16:36:45.773
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320910436

Start Time:	1995-341T16:38:21.772	Stop Time:	1995-341T16:38:45.773
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320910634

Start Time:	1995-341T16:40:21.772	Stop Time:	1995-341T16:40:48.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320910836

Start Time:	1995-341T16:42:24.440	Stop Time:	1995-341T16:42:48.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320911034

Start Time:	1995-341T16:44:24.440	Stop Time:	1995-341T16:44:51.106
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320911248

Start Time:	1995-341T16:46:35.106	Stop Time:	1995-341T16:46:51.106
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320911434

Start Time:	1995-341T16:48:27.106	Stop Time:	1995-341T16:48:53.773
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320911636

Start Time:	1995-341T16:50:29.772	Stop Time:	1995-341T16:50:53.773
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320911834

Start Time:	1995-341T16:52:29.772	Stop Time:	1995-341T16:52:56.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912036

Start Time:	1995-341T16:54:32.439	Stop Time:	1995-341T16:55:15.105
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912331

Start Time:	1995-341T16:57:31.106	Stop Time:	1995-341T16:58:29.771
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912408

Start Time:	1995-341T16:58:16.439	Stop Time:	1995-341T16:58:40.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912533

Start Time:	1995-341T16:59:33.771	Stop Time:	1995-341T17:00:32.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912606

Start Time:	1995-341T17:00:16.439	Stop Time:	1995-341T17:00:43.106
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912735

Start Time:	1995-341T17:01:36.439	Stop Time:	1995-341T17:02:35.106
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912808

Start Time:	1995-341T17:02:19.106	Stop Time:	1995-341T17:02:43.106
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320912937

Start Time:	1995-341T17:03:39.106	Stop Time:	1995-341T17:04:37.771
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913006

Start Time:	1995-341T17:04:19.106	Stop Time:	1995-341T17:04:45.771
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913010

Start Time:	1995-341T17:04:21.771	Stop Time:	1995-341T17:05:20.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913139

Start Time:	1995-341T17:05:41.771	Stop Time:	1995-341T17:06:40.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913208

Start Time:	1995-341T17:06:21.771	Stop Time:	1995-341T17:06:45.771
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913212

Start Time:	1995-341T17:06:24.439	Stop Time:	1995-341T17:07:23.105
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913406

Start Time:	1995-341T17:08:21.771	Stop Time:	1995-341T17:08:48.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913608

Start Time:	1995-341T17:10:24.439	Stop Time:	1995-341T17:10:48.439
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320913806

Start Time:	1995-341T17:12:24.439	Stop Time:	1995-341T17:12:51.104
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320914432

Start Time:	1995-341T17:18:45.771	Stop Time:	1995-341T17:19:44.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320914549

Start Time:	1995-341T17:19:57.771	Stop Time:	1995-341T17:20:56.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320914606

Start Time:	1995-341T17:20:29.771	Stop Time:	1995-341T17:20:56.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320914634

Start Time:	1995-341T17:20:48.438	Stop Time:	1995-341T17:21:47.104
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320914808

Start Time:	1995-341T17:22:32.438	Stop Time:	1995-341T17:22:56.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320914836

Start Time:	1995-341T17:22:51.104	Stop Time:	1995-341T17:23:49.771
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320914953

Start Time:	1995-341T17:24:03.104	Stop Time:	1995-341T17:25:01.770
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915006

Start Time:	1995-341T17:24:32.438	Stop Time:	1995-341T17:25:31.105
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915038

Start Time:	1995-341T17:24:53.771	Stop Time:	1995-341T17:25:52.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915054

Start Time:	1995-341T17:25:04.437	Stop Time:	1995-341T17:26:03.104
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915107

Start Time:	1995-341T17:25:33.771	Stop Time:	1995-341T17:26:03.104
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915139

Start Time:	1995-341T17:25:55.104	Stop Time:	1995-341T17:26:53.771
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915313

Start Time:	1995-341T17:27:39.104	Stop Time:	1995-341T17:28:05.770
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915341

Start Time:	1995-341T17:27:57.771	Stop Time:	1995-341T17:28:56.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915515

Start Time:	1995-341T17:29:41.771	Stop Time:	1995-341T17:30:05.770
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915543

Start Time:	1995-341T17:30:00.438	Stop Time:	1995-341T17:30:59.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915713

Start Time:	1995-341T17:31:41.771	Stop Time:	1995-341T17:32:08.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915745

Start Time:	1995-341T17:32:03.104	Stop Time:	1995-341T17:33:01.770
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915915

Start Time:	1995-341T17:33:44.438	Stop Time:	1995-341T17:34:08.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320915947

Start Time:	1995-341T17:34:05.770	Stop Time:	1995-341T17:35:05.770
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320916113

Start Time:	1995-341T17:35:44.438	Stop Time:	1995-341T17:36:11.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320916149

Start Time:	1995-341T17:36:08.438	Stop Time:	1995-341T17:37:08.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320916313

Start Time:	1995-341T17:37:45.771	Stop Time:	1995-341T17:38:12.438
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320916351

Start Time:	1995-341T17:38:11.103	Stop Time:	1995-341T17:39:11.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320916468

Start Time:	1995-341T17:39:23.103	Stop Time:	1995-341T17:40:23.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320916513

Start Time:	1995-341T17:39:47.103	Stop Time:	1995-341T17:40:23.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320916553

Start Time:	1995-341T17:40:13.771	Stop Time:	1995-341T17:41:13.771
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320917713

Start Time:	1995-341T17:51:55.103	Stop Time:	1995-341T17:52:21.769
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320917913

Start Time:	1995-341T17:53:56.436	Stop Time:	1995-341T17:54:23.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320918113

Start Time:	1995-341T17:55:57.770	Stop Time:	1995-341T17:56:24.437
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320918315

Start Time:	1995-341T17:58:00.437	Stop Time:	1995-341T17:58:24.437
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320918513

Start Time:	1995-341T18:00:00.437	Stop Time:	1995-341T18:00:27.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320918715

Start Time:	1995-341T18:02:03.103	Stop Time:	1995-341T18:02:27.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320918913

Start Time:	1995-341T18:04:03.103	Stop Time:	1995-341T18:04:29.769
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320919115

Start Time:	1995-341T18:06:05.769	Stop Time:	1995-341T18:06:29.769
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320919313

Start Time:	1995-341T18:08:05.769	Stop Time:	1995-341T18:08:32.435
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320919515

Start Time:	1995-341T18:10:08.435	Stop Time:	1995-341T18:10:32.435
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320919713

Start Time:	1995-341T18:12:08.435	Stop Time:	1995-341T18:12:35.103
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320919911

Start Time:	1995-341T18:14:08.435	Stop Time:	1995-341T18:15:07.102
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320919915

Start Time:	1995-341T18:14:11.102	Stop Time:	1995-341T18:15:09.769
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

80KHZ_0320919987

Start Time:	1995-341T18:14:59.103	Stop Time:	1995-341T18:15:57.768
This file contains 80KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in