PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LPHAAVG0_1MIN/ 2006 /

LPHAAVG0_1MIN_2006001_01

Start Time:	2006-001T00:00	Stop Time:	2006-002T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006002_01

Start Time:	2006-002T00:00	Stop Time:	2006-003T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006003_01

Start Time:	2006-003T00:00	Stop Time:	2006-004T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006004_01

Start Time:	2006-004T00:00	Stop Time:	2006-005T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006005_01

Start Time:	2006-005T00:00	Stop Time:	2006-006T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006006_01

Start Time:	2006-006T00:00	Stop Time:	2006-007T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006007_01

Start Time:	2006-007T00:00	Stop Time:	2006-008T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006008_01

Start Time:	2006-008T00:00	Stop Time:	2006-009T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006009_01

Start Time:	2006-009T00:00	Stop Time:	2006-010T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006010_01

Start Time:	2006-010T00:00	Stop Time:	2006-011T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006011_01

Start Time:	2006-011T00:00	Stop Time:	2006-012T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006012_01

Start Time:	2006-012T00:00	Stop Time:	2006-013T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006013_01

Start Time:	2006-013T00:00	Stop Time:	2006-014T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006014_01

Start Time:	2006-014T00:00	Stop Time:	2006-015T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006015_01

Start Time:	2006-015T00:00	Stop Time:	2006-016T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006016_01

Start Time:	2006-016T00:00	Stop Time:	2006-017T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006017_01

Start Time:	2006-017T00:00	Stop Time:	2006-018T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006018_01

Start Time:	2006-018T00:00	Stop Time:	2006-019T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006019_01

Start Time:	2006-019T00:00	Stop Time:	2006-020T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006020_01

Start Time:	2006-020T00:00	Stop Time:	2006-021T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006021_01

Start Time:	2006-021T00:00	Stop Time:	2006-022T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006022_01

Start Time:	2006-022T00:00	Stop Time:	2006-023T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006023_01

Start Time:	2006-023T00:00	Stop Time:	2006-024T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006024_01

Start Time:	2006-024T00:00	Stop Time:	2006-025T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006025_01

Start Time:	2006-025T00:00	Stop Time:	2006-026T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006026_01

Start Time:	2006-026T00:00	Stop Time:	2006-027T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006027_01

Start Time:	2006-027T00:00	Stop Time:	2006-028T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006028_01

Start Time:	2006-028T00:00	Stop Time:	2006-029T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006029_01

Start Time:	2006-029T00:00	Stop Time:	2006-030T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006030_01

Start Time:	2006-030T00:00	Stop Time:	2006-031T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006031_01

Start Time:	2006-031T00:00	Stop Time:	2006-032T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006032_01

Start Time:	2006-032T00:00	Stop Time:	2006-033T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006033_01

Start Time:	2006-033T00:00	Stop Time:	2006-034T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006034_01

Start Time:	2006-034T00:00	Stop Time:	2006-035T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006035_01

Start Time:	2006-035T00:00	Stop Time:	2006-036T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006036_01

Start Time:	2006-036T00:00	Stop Time:	2006-037T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006037_01

Start Time:	2006-037T00:00	Stop Time:	2006-038T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006038_01

Start Time:	2006-038T00:00	Stop Time:	2006-039T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006039_01

Start Time:	2006-039T00:00	Stop Time:	2006-040T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006040_01

Start Time:	2006-040T00:00	Stop Time:	2006-041T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006041_01

Start Time:	2006-041T00:00	Stop Time:	2006-042T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006042_01

Start Time:	2006-042T00:00	Stop Time:	2006-043T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006043_01

Start Time:	2006-043T00:00	Stop Time:	2006-044T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006044_01

Start Time:	2006-044T00:00	Stop Time:	2006-045T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006045_01

Start Time:	2006-045T00:00	Stop Time:	2006-046T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006046_01

Start Time:	2006-046T00:00	Stop Time:	2006-047T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006047_01

Start Time:	2006-047T00:00	Stop Time:	2006-048T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006048_01

Start Time:	2006-048T00:00	Stop Time:	2006-049T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006049_01

Start Time:	2006-049T00:00	Stop Time:	2006-050T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006050_01

Start Time:	2006-050T00:00	Stop Time:	2006-051T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006051_01

Start Time:	2006-051T00:00	Stop Time:	2006-052T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006052_01

Start Time:	2006-052T00:00	Stop Time:	2006-053T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006053_01

Start Time:	2006-053T00:00	Stop Time:	2006-054T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006054_01

Start Time:	2006-054T00:00	Stop Time:	2006-055T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006055_01

Start Time:	2006-055T00:00	Stop Time:	2006-056T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006056_01

Start Time:	2006-056T00:00	Stop Time:	2006-057T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006057_01

Start Time:	2006-057T00:00	Stop Time:	2006-058T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006058_01

Start Time:	2006-058T00:00	Stop Time:	2006-059T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006059_01

Start Time:	2006-059T00:00	Stop Time:	2006-060T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006060_01

Start Time:	2006-060T00:00	Stop Time:	2006-061T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006061_01

Start Time:	2006-061T00:00	Stop Time:	2006-062T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006062_01

Start Time:	2006-062T00:00	Stop Time:	2006-063T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006063_01

Start Time:	2006-063T00:00	Stop Time:	2006-064T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006064_01

Start Time:	2006-064T00:00	Stop Time:	2006-065T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006065_01

Start Time:	2006-065T00:00	Stop Time:	2006-066T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006066_01

Start Time:	2006-066T00:00	Stop Time:	2006-067T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006067_01

Start Time:	2006-067T00:00	Stop Time:	2006-068T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006068_01

Start Time:	2006-068T00:00	Stop Time:	2006-069T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006069_01

Start Time:	2006-069T00:00	Stop Time:	2006-070T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006070_01

Start Time:	2006-070T00:00	Stop Time:	2006-071T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006071_01

Start Time:	2006-071T00:00	Stop Time:	2006-072T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006072_01

Start Time:	2006-072T00:00	Stop Time:	2006-073T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006073_01

Start Time:	2006-073T00:00	Stop Time:	2006-074T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006074_01

Start Time:	2006-074T00:00	Stop Time:	2006-075T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006075_01

Start Time:	2006-075T00:00	Stop Time:	2006-076T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006076_01

Start Time:	2006-076T00:00	Stop Time:	2006-077T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006077_01

Start Time:	2006-077T00:00	Stop Time:	2006-078T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006078_01

Start Time:	2006-078T00:00	Stop Time:	2006-079T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006079_01

Start Time:	2006-079T00:00	Stop Time:	2006-080T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006080_01

Start Time:	2006-080T00:00	Stop Time:	2006-081T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006081_01

Start Time:	2006-081T00:00	Stop Time:	2006-082T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006082_01

Start Time:	2006-082T00:00	Stop Time:	2006-083T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006083_01

Start Time:	2006-083T00:00	Stop Time:	2006-084T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006084_01

Start Time:	2006-084T00:00	Stop Time:	2006-085T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006085_01

Start Time:	2006-085T00:00	Stop Time:	2006-086T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006086_01

Start Time:	2006-086T00:00	Stop Time:	2006-087T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006087_01

Start Time:	2006-087T00:00	Stop Time:	2006-088T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006088_01

Start Time:	2006-088T00:00	Stop Time:	2006-089T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006089_01

Start Time:	2006-089T00:00	Stop Time:	2006-090T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006090_01

Start Time:	2006-090T00:00	Stop Time:	2006-091T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006091_01

Start Time:	2006-091T00:00	Stop Time:	2006-092T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006092_01

Start Time:	2006-092T00:00	Stop Time:	2006-093T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006093_01

Start Time:	2006-093T00:00	Stop Time:	2006-094T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006094_01

Start Time:	2006-094T00:00	Stop Time:	2006-095T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006095_01

Start Time:	2006-095T00:00	Stop Time:	2006-096T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006096_01

Start Time:	2006-096T00:00	Stop Time:	2006-097T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006097_01

Start Time:	2006-097T00:00	Stop Time:	2006-098T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006098_01

Start Time:	2006-098T00:00	Stop Time:	2006-099T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006099_01

Start Time:	2006-099T00:00	Stop Time:	2006-100T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006100_01

Start Time:	2006-100T00:00	Stop Time:	2006-101T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006101_01

Start Time:	2006-101T00:00	Stop Time:	2006-102T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006102_01

Start Time:	2006-102T00:00	Stop Time:	2006-103T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006103_01

Start Time:	2006-103T00:00	Stop Time:	2006-104T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006104_01

Start Time:	2006-104T00:00	Stop Time:	2006-105T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006105_01

Start Time:	2006-105T00:00	Stop Time:	2006-106T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006106_01

Start Time:	2006-106T00:00	Stop Time:	2006-107T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006107_01

Start Time:	2006-107T00:00	Stop Time:	2006-108T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006108_01

Start Time:	2006-108T00:00	Stop Time:	2006-109T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006109_01

Start Time:	2006-109T00:00	Stop Time:	2006-110T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006110_01

Start Time:	2006-110T00:00	Stop Time:	2006-111T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006111_01

Start Time:	2006-111T00:00	Stop Time:	2006-112T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006112_01

Start Time:	2006-112T00:00	Stop Time:	2006-113T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006113_01

Start Time:	2006-113T00:00	Stop Time:	2006-114T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006114_01

Start Time:	2006-114T00:00	Stop Time:	2006-115T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006115_01

Start Time:	2006-115T00:00	Stop Time:	2006-116T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006116_01

Start Time:	2006-116T00:00	Stop Time:	2006-117T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006117_01

Start Time:	2006-117T00:00	Stop Time:	2006-118T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006118_01

Start Time:	2006-118T00:00	Stop Time:	2006-119T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006119_01

Start Time:	2006-119T00:00	Stop Time:	2006-120T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006120_01

Start Time:	2006-120T00:00	Stop Time:	2006-121T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006121_01

Start Time:	2006-121T00:00	Stop Time:	2006-122T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006122_01

Start Time:	2006-122T00:00	Stop Time:	2006-123T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006123_01

Start Time:	2006-123T00:00	Stop Time:	2006-124T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006124_01

Start Time:	2006-124T00:00	Stop Time:	2006-125T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006125_01

Start Time:	2006-125T00:00	Stop Time:	2006-126T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006126_01

Start Time:	2006-126T00:00	Stop Time:	2006-127T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006127_01

Start Time:	2006-127T00:00	Stop Time:	2006-128T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006128_01

Start Time:	2006-128T00:00	Stop Time:	2006-129T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006129_01

Start Time:	2006-129T00:00	Stop Time:	2006-130T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006130_01

Start Time:	2006-130T00:00	Stop Time:	2006-131T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006131_01

Start Time:	2006-131T00:00	Stop Time:	2006-132T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006132_01

Start Time:	2006-132T00:00	Stop Time:	2006-133T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006133_01

Start Time:	2006-133T00:00	Stop Time:	2006-134T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006134_01

Start Time:	2006-134T00:00	Stop Time:	2006-135T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006135_01

Start Time:	2006-135T00:00	Stop Time:	2006-136T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006136_01

Start Time:	2006-136T00:00	Stop Time:	2006-137T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006137_01

Start Time:	2006-137T00:00	Stop Time:	2006-138T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006138_01

Start Time:	2006-138T00:00	Stop Time:	2006-139T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006139_01

Start Time:	2006-139T00:00	Stop Time:	2006-140T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006140_01

Start Time:	2006-140T00:00	Stop Time:	2006-141T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006141_01

Start Time:	2006-141T00:00	Stop Time:	2006-142T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006142_01

Start Time:	2006-142T00:00	Stop Time:	2006-143T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006143_01

Start Time:	2006-143T00:00	Stop Time:	2006-144T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006144_01

Start Time:	2006-144T00:00	Stop Time:	2006-145T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006145_01

Start Time:	2006-145T00:00	Stop Time:	2006-146T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006146_01

Start Time:	2006-146T00:00	Stop Time:	2006-147T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006147_01

Start Time:	2006-147T00:00	Stop Time:	2006-148T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006148_01

Start Time:	2006-148T00:00	Stop Time:	2006-149T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006149_01

Start Time:	2006-149T00:00	Stop Time:	2006-150T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006150_01

Start Time:	2006-150T00:00	Stop Time:	2006-151T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006151_01

Start Time:	2006-151T00:00	Stop Time:	2006-152T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006152_01

Start Time:	2006-152T00:00	Stop Time:	2006-153T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006153_01

Start Time:	2006-153T00:00	Stop Time:	2006-154T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006154_01

Start Time:	2006-154T00:00	Stop Time:	2006-155T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006155_01

Start Time:	2006-155T00:00	Stop Time:	2006-156T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006156_01

Start Time:	2006-156T00:00	Stop Time:	2006-157T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006157_01

Start Time:	2006-157T00:00	Stop Time:	2006-158T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006158_01

Start Time:	2006-158T00:00	Stop Time:	2006-159T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006159_01

Start Time:	2006-159T00:00	Stop Time:	2006-160T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006161_01

Start Time:	2006-161T00:00	Stop Time:	2006-162T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006162_01

Start Time:	2006-162T00:00	Stop Time:	2006-163T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006163_01

Start Time:	2006-163T00:00	Stop Time:	2006-164T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006164_01

Start Time:	2006-164T00:00	Stop Time:	2006-165T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006165_01

Start Time:	2006-165T00:00	Stop Time:	2006-166T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006166_01

Start Time:	2006-166T00:00	Stop Time:	2006-167T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006167_01

Start Time:	2006-167T00:00	Stop Time:	2006-168T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006168_01

Start Time:	2006-168T00:00	Stop Time:	2006-169T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006169_01

Start Time:	2006-169T00:00	Stop Time:	2006-170T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006170_01

Start Time:	2006-170T00:00	Stop Time:	2006-171T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006171_01

Start Time:	2006-171T00:00	Stop Time:	2006-172T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006172_01

Start Time:	2006-172T00:00	Stop Time:	2006-173T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006173_01

Start Time:	2006-173T00:00	Stop Time:	2006-174T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006174_01

Start Time:	2006-174T00:00	Stop Time:	2006-175T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006175_01

Start Time:	2006-175T00:00	Stop Time:	2006-176T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006176_01

Start Time:	2006-176T00:00	Stop Time:	2006-177T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006177_01

Start Time:	2006-177T00:00	Stop Time:	2006-178T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006178_01

Start Time:	2006-178T00:00	Stop Time:	2006-179T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006179_01

Start Time:	2006-179T00:00	Stop Time:	2006-180T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006180_01

Start Time:	2006-180T00:00	Stop Time:	2006-181T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006181_01

Start Time:	2006-181T00:00	Stop Time:	2006-182T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006182_01

Start Time:	2006-182T00:00	Stop Time:	2006-183T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006183_01

Start Time:	2006-183T00:00	Stop Time:	2006-184T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006184_01

Start Time:	2006-184T00:00	Stop Time:	2006-185T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006185_01

Start Time:	2006-185T00:00	Stop Time:	2006-186T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006186_01

Start Time:	2006-186T00:00	Stop Time:	2006-187T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006187_01

Start Time:	2006-187T00:00	Stop Time:	2006-188T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006188_01

Start Time:	2006-188T00:00	Stop Time:	2006-189T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006189_01

Start Time:	2006-189T00:00	Stop Time:	2006-190T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006190_01

Start Time:	2006-190T00:00	Stop Time:	2006-191T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006191_01

Start Time:	2006-191T00:00	Stop Time:	2006-192T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006192_01

Start Time:	2006-192T00:00	Stop Time:	2006-193T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006193_01

Start Time:	2006-193T00:00	Stop Time:	2006-194T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006194_01

Start Time:	2006-194T00:00	Stop Time:	2006-195T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006195_01

Start Time:	2006-195T00:00	Stop Time:	2006-196T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006196_01

Start Time:	2006-196T00:00	Stop Time:	2006-197T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006197_01

Start Time:	2006-197T00:00	Stop Time:	2006-198T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006198_01

Start Time:	2006-198T00:00	Stop Time:	2006-199T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006199_01

Start Time:	2006-199T00:00	Stop Time:	2006-200T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006200_01

Start Time:	2006-200T00:00	Stop Time:	2006-201T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006201_01

Start Time:	2006-201T00:00	Stop Time:	2006-202T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006202_01

Start Time:	2006-202T00:00	Stop Time:	2006-203T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006203_01

Start Time:	2006-203T00:00	Stop Time:	2006-204T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006204_01

Start Time:	2006-204T00:00	Stop Time:	2006-205T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006205_01

Start Time:	2006-205T00:00	Stop Time:	2006-206T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006206_01

Start Time:	2006-206T00:00	Stop Time:	2006-207T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006207_01

Start Time:	2006-207T00:00	Stop Time:	2006-208T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006208_01

Start Time:	2006-208T00:00	Stop Time:	2006-209T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006209_01

Start Time:	2006-209T00:00	Stop Time:	2006-210T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006210_01

Start Time:	2006-210T00:00	Stop Time:	2006-211T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006211_01

Start Time:	2006-211T00:00	Stop Time:	2006-212T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006212_01

Start Time:	2006-212T00:00	Stop Time:	2006-213T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006213_01

Start Time:	2006-213T00:00	Stop Time:	2006-214T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006214_01

Start Time:	2006-214T00:00	Stop Time:	2006-215T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006215_01

Start Time:	2006-215T00:00	Stop Time:	2006-216T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006216_01

Start Time:	2006-216T00:00	Stop Time:	2006-217T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006217_01

Start Time:	2006-217T00:00	Stop Time:	2006-218T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006218_01

Start Time:	2006-218T00:00	Stop Time:	2006-219T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006219_01

Start Time:	2006-219T00:00	Stop Time:	2006-220T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006220_01

Start Time:	2006-220T00:00	Stop Time:	2006-221T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006221_01

Start Time:	2006-221T00:00	Stop Time:	2006-222T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006222_01

Start Time:	2006-222T00:00	Stop Time:	2006-223T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006223_01

Start Time:	2006-223T00:00	Stop Time:	2006-224T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006224_01

Start Time:	2006-224T00:00	Stop Time:	2006-225T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006225_01

Start Time:	2006-225T00:00	Stop Time:	2006-226T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006226_01

Start Time:	2006-226T00:00	Stop Time:	2006-227T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006227_01

Start Time:	2006-227T00:00	Stop Time:	2006-228T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006228_01

Start Time:	2006-228T00:00	Stop Time:	2006-229T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006229_01

Start Time:	2006-229T00:00	Stop Time:	2006-230T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006230_01

Start Time:	2006-230T00:00	Stop Time:	2006-231T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006231_01

Start Time:	2006-231T00:00	Stop Time:	2006-232T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006232_01

Start Time:	2006-232T00:00	Stop Time:	2006-233T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006233_01

Start Time:	2006-233T00:00	Stop Time:	2006-234T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006234_01

Start Time:	2006-234T00:00	Stop Time:	2006-235T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006235_01

Start Time:	2006-235T00:00	Stop Time:	2006-236T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006236_01

Start Time:	2006-236T00:00	Stop Time:	2006-237T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006237_01

Start Time:	2006-237T00:00	Stop Time:	2006-238T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006238_01

Start Time:	2006-238T00:00	Stop Time:	2006-239T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006239_01

Start Time:	2006-239T00:00	Stop Time:	2006-240T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006240_01

Start Time:	2006-240T00:00	Stop Time:	2006-241T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006241_01

Start Time:	2006-241T00:00	Stop Time:	2006-242T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006242_01

Start Time:	2006-242T00:00	Stop Time:	2006-243T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006243_01

Start Time:	2006-243T00:00	Stop Time:	2006-244T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006244_01

Start Time:	2006-244T00:00	Stop Time:	2006-245T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006245_01

Start Time:	2006-245T00:00	Stop Time:	2006-246T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006246_01

Start Time:	2006-246T00:00	Stop Time:	2006-247T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006247_01

Start Time:	2006-247T00:00	Stop Time:	2006-248T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006248_01

Start Time:	2006-248T00:00	Stop Time:	2006-249T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006249_01

Start Time:	2006-249T00:00	Stop Time:	2006-250T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006250_01

Start Time:	2006-250T00:00	Stop Time:	2006-251T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006251_01

Start Time:	2006-251T00:00	Stop Time:	2006-252T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006252_01

Start Time:	2006-252T00:00	Stop Time:	2006-253T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006253_01

Start Time:	2006-253T00:00	Stop Time:	2006-254T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006254_01

Start Time:	2006-254T00:00	Stop Time:	2006-255T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006255_01

Start Time:	2006-255T00:00	Stop Time:	2006-256T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006256_01

Start Time:	2006-256T00:00	Stop Time:	2006-257T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006257_01

Start Time:	2006-257T00:00	Stop Time:	2006-258T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006258_01

Start Time:	2006-258T00:00	Stop Time:	2006-259T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006259_01

Start Time:	2006-259T00:00	Stop Time:	2006-260T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006260_01

Start Time:	2006-260T00:00	Stop Time:	2006-261T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006261_01

Start Time:	2006-261T00:00	Stop Time:	2006-262T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006262_01

Start Time:	2006-262T00:00	Stop Time:	2006-263T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006263_01

Start Time:	2006-263T00:00	Stop Time:	2006-264T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006264_01

Start Time:	2006-264T00:00	Stop Time:	2006-265T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006265_01

Start Time:	2006-265T00:00	Stop Time:	2006-266T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006266_01

Start Time:	2006-266T00:00	Stop Time:	2006-267T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006267_01

Start Time:	2006-267T00:00	Stop Time:	2006-268T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006268_01

Start Time:	2006-268T00:00	Stop Time:	2006-269T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006269_01

Start Time:	2006-269T00:00	Stop Time:	2006-270T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006270_01

Start Time:	2006-270T00:00	Stop Time:	2006-271T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006271_01

Start Time:	2006-271T00:00	Stop Time:	2006-272T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006272_01

Start Time:	2006-272T00:00	Stop Time:	2006-273T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006273_01

Start Time:	2006-273T00:00	Stop Time:	2006-274T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006274_01

Start Time:	2006-274T00:00	Stop Time:	2006-275T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006275_01

Start Time:	2006-275T00:00	Stop Time:	2006-276T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006276_01

Start Time:	2006-276T00:00	Stop Time:	2006-277T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006277_01

Start Time:	2006-277T00:00	Stop Time:	2006-278T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006278_01

Start Time:	2006-278T00:00	Stop Time:	2006-279T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006279_01

Start Time:	2006-279T00:00	Stop Time:	2006-280T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006280_01

Start Time:	2006-280T00:00	Stop Time:	2006-281T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006281_01

Start Time:	2006-281T00:00	Stop Time:	2006-282T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006282_01

Start Time:	2006-282T00:00	Stop Time:	2006-283T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006283_01

Start Time:	2006-283T00:00	Stop Time:	2006-284T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006284_01

Start Time:	2006-284T00:00	Stop Time:	2006-285T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006285_01

Start Time:	2006-285T00:00	Stop Time:	2006-286T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006286_01

Start Time:	2006-286T00:00	Stop Time:	2006-287T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006287_01

Start Time:	2006-287T00:00	Stop Time:	2006-288T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006288_01

Start Time:	2006-288T00:00	Stop Time:	2006-289T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006289_01

Start Time:	2006-289T00:00	Stop Time:	2006-290T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006290_01

Start Time:	2006-290T00:00	Stop Time:	2006-291T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006291_01

Start Time:	2006-291T00:00	Stop Time:	2006-292T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006292_01

Start Time:	2006-292T00:00	Stop Time:	2006-293T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006293_01

Start Time:	2006-293T00:00	Stop Time:	2006-294T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006294_01

Start Time:	2006-294T00:00	Stop Time:	2006-295T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006295_01

Start Time:	2006-295T00:00	Stop Time:	2006-296T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006296_01

Start Time:	2006-296T00:00	Stop Time:	2006-297T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006297_01

Start Time:	2006-297T00:00	Stop Time:	2006-298T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006298_01

Start Time:	2006-298T00:00	Stop Time:	2006-299T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006299_01

Start Time:	2006-299T00:00	Stop Time:	2006-300T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006300_01

Start Time:	2006-300T00:00	Stop Time:	2006-301T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006301_01

Start Time:	2006-301T00:00	Stop Time:	2006-302T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006302_01

Start Time:	2006-302T00:00	Stop Time:	2006-303T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006303_01

Start Time:	2006-303T00:00	Stop Time:	2006-304T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006304_01

Start Time:	2006-304T00:00	Stop Time:	2006-305T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006305_01

Start Time:	2006-305T00:00	Stop Time:	2006-306T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006306_01

Start Time:	2006-306T00:00	Stop Time:	2006-307T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006307_01

Start Time:	2006-307T00:00	Stop Time:	2006-308T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006308_01

Start Time:	2006-308T00:00	Stop Time:	2006-309T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006309_01

Start Time:	2006-309T00:00	Stop Time:	2006-310T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006310_01

Start Time:	2006-310T00:00	Stop Time:	2006-311T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006311_01

Start Time:	2006-311T00:00	Stop Time:	2006-312T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006312_01

Start Time:	2006-312T00:00	Stop Time:	2006-313T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006313_01

Start Time:	2006-313T00:00	Stop Time:	2006-314T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006314_01

Start Time:	2006-314T00:00	Stop Time:	2006-315T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006315_01

Start Time:	2006-315T00:00	Stop Time:	2006-316T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006316_01

Start Time:	2006-316T00:00	Stop Time:	2006-317T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006317_01

Start Time:	2006-317T00:00	Stop Time:	2006-318T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006318_01

Start Time:	2006-318T00:00	Stop Time:	2006-319T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006319_01

Start Time:	2006-319T00:00	Stop Time:	2006-320T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006320_01

Start Time:	2006-320T00:00	Stop Time:	2006-321T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006321_01

Start Time:	2006-321T00:00	Stop Time:	2006-322T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006322_01

Start Time:	2006-322T00:00	Stop Time:	2006-323T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006323_01

Start Time:	2006-323T00:00	Stop Time:	2006-324T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006324_01

Start Time:	2006-324T00:00	Stop Time:	2006-325T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006325_01

Start Time:	2006-325T00:00	Stop Time:	2006-326T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006326_01

Start Time:	2006-326T00:00	Stop Time:	2006-327T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006327_01

Start Time:	2006-327T00:00	Stop Time:	2006-328T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006328_01

Start Time:	2006-328T00:00	Stop Time:	2006-329T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006329_01

Start Time:	2006-329T00:00	Stop Time:	2006-330T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006330_01

Start Time:	2006-330T00:00	Stop Time:	2006-331T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006331_01

Start Time:	2006-331T00:00	Stop Time:	2006-332T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006332_01

Start Time:	2006-332T00:00	Stop Time:	2006-333T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006333_01

Start Time:	2006-333T00:00	Stop Time:	2006-334T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006334_01

Start Time:	2006-334T00:00	Stop Time:	2006-335T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006335_01

Start Time:	2006-335T00:00	Stop Time:	2006-336T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006336_01

Start Time:	2006-336T00:00	Stop Time:	2006-337T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006337_01

Start Time:	2006-337T00:00	Stop Time:	2006-338T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006338_01

Start Time:	2006-338T00:00	Stop Time:	2006-339T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006339_01

Start Time:	2006-339T00:00	Stop Time:	2006-340T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006340_01

Start Time:	2006-340T00:00	Stop Time:	2006-341T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006341_01

Start Time:	2006-341T00:00	Stop Time:	2006-342T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006342_01

Start Time:	2006-342T00:00	Stop Time:	2006-343T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006343_01

Start Time:	2006-343T00:00	Stop Time:	2006-344T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006344_01

Start Time:	2006-344T00:00	Stop Time:	2006-345T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006345_01

Start Time:	2006-345T00:00	Stop Time:	2006-346T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006346_01

Start Time:	2006-346T00:00	Stop Time:	2006-347T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006347_01

Start Time:	2006-347T00:00	Stop Time:	2006-348T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006348_01

Start Time:	2006-348T00:00	Stop Time:	2006-349T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006349_01

Start Time:	2006-349T00:00	Stop Time:	2006-350T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006350_01

Start Time:	2006-350T00:00	Stop Time:	2006-351T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006351_01

Start Time:	2006-351T00:00	Stop Time:	2006-352T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006352_01

Start Time:	2006-352T00:00	Stop Time:	2006-353T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006353_01

Start Time:	2006-353T00:00	Stop Time:	2006-354T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006354_01

Start Time:	2006-354T00:00	Stop Time:	2006-355T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006355_01

Start Time:	2006-355T00:00	Stop Time:	2006-356T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006356_01

Start Time:	2006-356T00:00	Stop Time:	2006-357T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006357_01

Start Time:	2006-357T00:00	Stop Time:	2006-358T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006358_01

Start Time:	2006-358T00:00	Stop Time:	2006-359T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006359_01

Start Time:	2006-359T00:00	Stop Time:	2006-360T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006360_01

Start Time:	2006-360T00:00	Stop Time:	2006-361T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006361_01

Start Time:	2006-361T00:00	Stop Time:	2006-362T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006362_01

Start Time:	2006-362T00:00	Stop Time:	2006-363T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006363_01

Start Time:	2006-363T00:00	Stop Time:	2006-364T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006364_01

Start Time:	2006-364T00:00	Stop Time:	2006-365T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2006365_01

Start Time:	2006-365T00:00	Stop Time:	2007-001T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in