PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Galileo >> PWS

Galileo Orbiter Jupiter PWS 10 kHz Wideband Waveform Data
GO-J-PWS-2-EDR-WAVEFORM-10KHZ-V1.0	PDS 3 CERTIFIED

Start Time: 1995-12-07 23:30:21 - Stop Time: 2002-11-05 14:17:09

This data set contains the Galileo Orbiter Jupiter PWS 10 kHz Wideband Waveform Data. It includes 10 kHz wideband waveform measurements from the Galileo plasma wave receiver obtained during Jupiter orbital operations. Data were acquired near perijove, satellite encounters, and other selected intervals.

Citiation Information

Title	Galileo Orbiter Jupiter PWS 10 kHz Wideband Waveform Data
Publisher	NASA Planetary Data System
doi	https://doi.org/10.17189/1519678

Top/ DATA/ C062554 /

10KHZ_0625540058

Start Time:	2001-288T16:20:30.103	Stop Time:	2001-288T16:21:28.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540082

Start Time:	2001-288T16:20:46.103	Stop Time:	2001-288T16:21:44.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540159

Start Time:	2001-288T16:21:31.437	Stop Time:	2001-288T16:22:30.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540183

Start Time:	2001-288T16:21:47.436	Stop Time:	2001-288T16:22:46.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540260

Start Time:	2001-288T16:22:32.770	Stop Time:	2001-288T16:23:31.437
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540284

Start Time:	2001-288T16:22:48.770	Stop Time:	2001-288T16:23:47.436
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540361

Start Time:	2001-288T16:23:34.103	Stop Time:	2001-288T16:24:32.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540385

Start Time:	2001-288T16:23:50.103	Stop Time:	2001-288T16:24:48.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540462

Start Time:	2001-288T16:24:35.436	Stop Time:	2001-288T16:25:34.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540486

Start Time:	2001-288T16:24:51.436	Stop Time:	2001-288T16:25:50.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540563

Start Time:	2001-288T16:25:36.770	Stop Time:	2001-288T16:26:35.436
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540587

Start Time:	2001-288T16:25:52.770	Stop Time:	2001-288T16:26:51.436
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540664

Start Time:	2001-288T16:26:38.103	Stop Time:	2001-288T16:27:28.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540688

Start Time:	2001-288T16:26:54.103	Stop Time:	2001-288T16:27:52.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540767

Start Time:	2001-288T16:27:40.770	Stop Time:	2001-288T16:27:51.436
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540785

Start Time:	2001-288T16:27:52.770	Stop Time:	2001-288T16:28:51.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540789

Start Time:	2001-288T16:27:55.436	Stop Time:	2001-288T16:28:54.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540886

Start Time:	2001-288T16:28:54.103	Stop Time:	2001-288T16:29:52.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540890

Start Time:	2001-288T16:28:56.770	Stop Time:	2001-288T16:29:55.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625540987

Start Time:	2001-288T16:29:55.435	Stop Time:	2001-288T16:30:54.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541000

Start Time:	2001-288T16:29:58.103	Stop Time:	2001-288T16:30:56.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541088

Start Time:	2001-288T16:30:56.770	Stop Time:	2001-288T16:31:55.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541101

Start Time:	2001-288T16:30:59.435	Stop Time:	2001-288T16:31:58.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541189

Start Time:	2001-288T16:31:58.103	Stop Time:	2001-288T16:32:56.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541202

Start Time:	2001-288T16:32:00.770	Stop Time:	2001-288T16:32:59.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541290

Start Time:	2001-288T16:32:59.435	Stop Time:	2001-288T16:33:58.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541303

Start Time:	2001-288T16:33:02.103	Stop Time:	2001-288T16:34:00.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541400

Start Time:	2001-288T16:34:00.770	Stop Time:	2001-288T16:34:59.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541404

Start Time:	2001-288T16:34:03.435	Stop Time:	2001-288T16:35:02.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541501

Start Time:	2001-288T16:35:02.103	Stop Time:	2001-288T16:36:00.770
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541505

Start Time:	2001-288T16:35:04.769	Stop Time:	2001-288T16:36:03.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541602

Start Time:	2001-288T16:36:03.435	Stop Time:	2001-288T16:37:02.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541606

Start Time:	2001-288T16:36:06.102	Stop Time:	2001-288T16:37:04.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541703

Start Time:	2001-288T16:37:04.769	Stop Time:	2001-288T16:38:03.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541707

Start Time:	2001-288T16:37:07.435	Stop Time:	2001-288T16:38:06.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541804

Start Time:	2001-288T16:38:06.102	Stop Time:	2001-288T16:39:04.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541808

Start Time:	2001-288T16:38:08.769	Stop Time:	2001-288T16:39:07.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541905

Start Time:	2001-288T16:39:07.435	Stop Time:	2001-288T16:40:06.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625541909

Start Time:	2001-288T16:39:10.102	Stop Time:	2001-288T16:40:08.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542006

Start Time:	2001-288T16:40:08.769	Stop Time:	2001-288T16:41:07.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542010

Start Time:	2001-288T16:40:11.435	Stop Time:	2001-288T16:41:10.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542107

Start Time:	2001-288T16:41:10.102	Stop Time:	2001-288T16:42:08.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542111

Start Time:	2001-288T16:41:12.769	Stop Time:	2001-288T16:42:11.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542208

Start Time:	2001-288T16:42:11.435	Stop Time:	2001-288T16:43:10.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542212

Start Time:	2001-288T16:42:14.102	Stop Time:	2001-288T16:43:12.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542309

Start Time:	2001-288T16:43:12.769	Stop Time:	2001-288T16:44:11.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542313

Start Time:	2001-288T16:43:15.435	Stop Time:	2001-288T16:44:14.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542410

Start Time:	2001-288T16:44:14.102	Stop Time:	2001-288T16:45:12.769
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542414

Start Time:	2001-288T16:44:16.768	Stop Time:	2001-288T16:45:15.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542511

Start Time:	2001-288T16:45:15.435	Stop Time:	2001-288T16:46:14.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542515

Start Time:	2001-288T16:45:18.103	Stop Time:	2001-288T16:46:16.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542612

Start Time:	2001-288T16:46:16.768	Stop Time:	2001-288T16:47:15.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542616

Start Time:	2001-288T16:46:19.435	Stop Time:	2001-288T16:47:18.103
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542713

Start Time:	2001-288T16:47:18.103	Stop Time:	2001-288T16:48:16.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542717

Start Time:	2001-288T16:47:20.768	Stop Time:	2001-288T16:48:19.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542814

Start Time:	2001-288T16:48:19.435	Stop Time:	2001-288T16:49:18.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542818

Start Time:	2001-288T16:48:22.103	Stop Time:	2001-288T16:49:20.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542915

Start Time:	2001-288T16:49:20.768	Stop Time:	2001-288T16:50:19.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542919

Start Time:	2001-288T16:49:23.435	Stop Time:	2001-288T16:50:22.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625542945

Start Time:	2001-288T16:49:40.768	Stop Time:	2001-288T16:49:54.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543016

Start Time:	2001-288T16:50:22.102	Stop Time:	2001-288T16:51:20.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543020

Start Time:	2001-288T16:50:24.768	Stop Time:	2001-288T16:51:23.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543117

Start Time:	2001-288T16:51:23.435	Stop Time:	2001-288T16:52:22.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543121

Start Time:	2001-288T16:51:26.102	Stop Time:	2001-288T16:52:24.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543218

Start Time:	2001-288T16:52:24.768	Stop Time:	2001-288T16:53:23.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543222

Start Time:	2001-288T16:52:27.435	Stop Time:	2001-288T16:53:26.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543319

Start Time:	2001-288T16:53:26.102	Stop Time:	2001-288T16:54:24.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543323

Start Time:	2001-288T16:53:28.768	Stop Time:	2001-288T16:54:27.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543420

Start Time:	2001-288T16:54:27.435	Stop Time:	2001-288T16:55:26.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543424

Start Time:	2001-288T16:54:30.102	Stop Time:	2001-288T16:55:28.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543521

Start Time:	2001-288T16:55:28.768	Stop Time:	2001-288T16:56:27.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543525

Start Time:	2001-288T16:55:31.435	Stop Time:	2001-288T16:56:30.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543622

Start Time:	2001-288T16:56:30.102	Stop Time:	2001-288T16:57:28.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543626

Start Time:	2001-288T16:56:32.768	Stop Time:	2001-288T16:57:31.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543723

Start Time:	2001-288T16:57:31.435	Stop Time:	2001-288T16:58:30.102
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543727

Start Time:	2001-288T16:57:34.101	Stop Time:	2001-288T16:58:32.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543824

Start Time:	2001-288T16:58:32.768	Stop Time:	2001-288T16:59:31.434
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543828

Start Time:	2001-288T16:58:35.435	Stop Time:	2001-288T16:59:34.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543925

Start Time:	2001-288T16:59:34.101	Stop Time:	2001-288T17:00:32.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625543929

Start Time:	2001-288T16:59:36.768	Stop Time:	2001-288T17:00:35.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544026

Start Time:	2001-288T17:00:35.435	Stop Time:	2001-288T17:01:34.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544030

Start Time:	2001-288T17:00:38.101	Stop Time:	2001-288T17:01:36.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544032

Start Time:	2001-288T17:00:39.435	Stop Time:	2001-288T17:00:55.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544127

Start Time:	2001-288T17:01:36.768	Stop Time:	2001-288T17:02:35.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544131

Start Time:	2001-288T17:01:39.435	Stop Time:	2001-288T17:02:38.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544228

Start Time:	2001-288T17:02:38.101	Stop Time:	2001-288T17:03:36.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544232

Start Time:	2001-288T17:02:40.768	Stop Time:	2001-288T17:03:39.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544329

Start Time:	2001-288T17:03:39.435	Stop Time:	2001-288T17:04:38.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544333

Start Time:	2001-288T17:03:42.101	Stop Time:	2001-288T17:04:40.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544430

Start Time:	2001-288T17:04:40.768	Stop Time:	2001-288T17:05:39.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544434

Start Time:	2001-288T17:04:43.435	Stop Time:	2001-288T17:05:42.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544531

Start Time:	2001-288T17:05:42.101	Stop Time:	2001-288T17:06:40.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544535

Start Time:	2001-288T17:05:44.768	Stop Time:	2001-288T17:06:43.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544632

Start Time:	2001-288T17:06:43.435	Stop Time:	2001-288T17:07:42.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544636

Start Time:	2001-288T17:06:46.101	Stop Time:	2001-288T17:07:44.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544733

Start Time:	2001-288T17:07:44.768	Stop Time:	2001-288T17:08:43.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544737

Start Time:	2001-288T17:07:47.435	Stop Time:	2001-288T17:08:46.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544834

Start Time:	2001-288T17:08:46.101	Stop Time:	2001-288T17:09:44.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544838

Start Time:	2001-288T17:08:48.768	Stop Time:	2001-288T17:09:47.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544935

Start Time:	2001-288T17:09:47.435	Stop Time:	2001-288T17:10:46.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625544939

Start Time:	2001-288T17:09:50.101	Stop Time:	2001-288T17:10:48.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545036

Start Time:	2001-288T17:10:48.768	Stop Time:	2001-288T17:11:47.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545040

Start Time:	2001-288T17:10:51.435	Stop Time:	2001-288T17:11:50.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545137

Start Time:	2001-288T17:11:50.101	Stop Time:	2001-288T17:12:48.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545141

Start Time:	2001-288T17:11:52.768	Stop Time:	2001-288T17:12:51.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545238

Start Time:	2001-288T17:12:51.435	Stop Time:	2001-288T17:13:50.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545242

Start Time:	2001-288T17:12:54.101	Stop Time:	2001-288T17:13:52.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545339

Start Time:	2001-288T17:13:52.768	Stop Time:	2001-288T17:14:51.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545343

Start Time:	2001-288T17:13:55.435	Stop Time:	2001-288T17:14:54.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545440

Start Time:	2001-288T17:14:54.101	Stop Time:	2001-288T17:15:52.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545444

Start Time:	2001-288T17:14:56.768	Stop Time:	2001-288T17:15:55.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545541

Start Time:	2001-288T17:15:55.435	Stop Time:	2001-288T17:16:54.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545545

Start Time:	2001-288T17:15:58.101	Stop Time:	2001-288T17:16:56.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545642

Start Time:	2001-288T17:16:56.768	Stop Time:	2001-288T17:17:55.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545646

Start Time:	2001-288T17:16:59.435	Stop Time:	2001-288T17:17:58.101
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545743

Start Time:	2001-288T17:17:58.101	Stop Time:	2001-288T17:18:56.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545747

Start Time:	2001-288T17:18:00.768	Stop Time:	2001-288T17:18:59.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545844

Start Time:	2001-288T17:18:59.435	Stop Time:	2001-288T17:19:58.100
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545848

Start Time:	2001-288T17:19:02.101	Stop Time:	2001-288T17:20:00.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545945

Start Time:	2001-288T17:20:00.768	Stop Time:	2001-288T17:20:59.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625545949

Start Time:	2001-288T17:20:03.435	Stop Time:	2001-288T17:21:02.100
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546046

Start Time:	2001-288T17:21:02.100	Stop Time:	2001-288T17:22:00.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546050

Start Time:	2001-288T17:21:04.767	Stop Time:	2001-288T17:22:03.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546147

Start Time:	2001-288T17:22:03.435	Stop Time:	2001-288T17:23:02.100
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546151

Start Time:	2001-288T17:22:06.100	Stop Time:	2001-288T17:23:04.767
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546248

Start Time:	2001-288T17:23:04.767	Stop Time:	2001-288T17:24:03.435
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546252

Start Time:	2001-288T17:23:07.434	Stop Time:	2001-288T17:24:06.100
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546349

Start Time:	2001-288T17:24:06.100	Stop Time:	2001-288T17:25:04.767
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546353

Start Time:	2001-288T17:24:08.768	Stop Time:	2001-288T17:25:07.434
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546450

Start Time:	2001-288T17:25:07.434	Stop Time:	2001-288T17:26:06.100
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546454

Start Time:	2001-288T17:25:10.101	Stop Time:	2001-288T17:26:08.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546551

Start Time:	2001-288T17:26:08.768	Stop Time:	2001-288T17:26:32.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

10KHZ_0625546555

Start Time:	2001-288T17:26:11.435	Stop Time:	2001-288T17:26:32.768
This file contains 10KHZ PWS waveform data from the waveform analyzer. The binary file structure is somewhat complex. Users should refer to the pictures in the WAVEFORM.TXT files for additional information. All waveform data files are binary and have a fixed record length structure. The first record is an ASCII header (padded to record length) that contains many of the same parameters contained in this label file. The next record is a binary header that also contains much of the same information as this label. This label is derived from the data file by reading these headers. The binary header record is described in machine readable form by the PDS label file EDRHDR.FMT and in a more human readable for in EDRHDR.TXT. The remaining records contain data. Each data record has a 30 byte header (prefix) followed by n (n=1 or 10) blocks of waveform samples. In most cases, only a few of these data blocks contain data (the rest may be zero filled). The file record length, the number of waveform samples per data block, and the sampling frequency are dependent on the spacecraft telemetry mode and the instrument mode. The following table describes the variations in waveform data files: APID Inst Mode* Tel-fmt Rec-Length Blocks/Rec Samples/Block ID (bytes) --------------------------------------------------------------------- PWH1 1,2,3 LPW 465 1 870 PWH2 1,2,3 MPW 670 10 128 PWH3 1,2 MPP 1630 10 320 PWH3 3 MPP 1080 10 210 PWH4 1,2 HPW 7910 10 1576 PWH4 3 HPW 1080 10 210 PWH5 1,2,3 LPW 4350 10 864 * 1=10 kHz, 2=80 kHz, 3=1kHz Each data record contains data acquired in a single minor frame (mod91=0.667 seconds). The time tag for the data record is located in the row prefix header (ROWPRFX.FMT). The start time of a block of waveform samples is the RTI in which the data block occurs (10 RTI per minor frame, 0-9). Therefore if the waveform samples are located in data block 3 and the row prefix header gives the time tag 03209117:27:0:0, then the samples begin at 03209117:27:2:0. The time between samples is determined by the sampling frequency. There are 3150, 25200, 201600 samples per second in the 1 kHz, 10, kHz, and 80 kHz modes respectively. Please note that in the PWH5 mode, there are more samples than can be taken in a single RTI at the 1 kHz sample rate. The waveform data are sampled uniformly and continuously in a single data block, across the RTI boundaries. These data are non-overlapping so that data cannot occur in all of the data blocks for this mode/format combination.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in