PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LPHAAVG0_1MIN/ 2016 /

LPHAAVG0_1MIN_2016001_02

Start Time:	2016-001T00:00	Stop Time:	2016-002T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016002_02

Start Time:	2016-002T00:00	Stop Time:	2016-003T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016003_02

Start Time:	2016-003T00:00	Stop Time:	2016-004T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016004_02

Start Time:	2016-004T00:00	Stop Time:	2016-005T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016005_02

Start Time:	2016-005T00:00	Stop Time:	2016-006T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016006_02

Start Time:	2016-006T00:00	Stop Time:	2016-007T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016007_02

Start Time:	2016-007T00:00	Stop Time:	2016-008T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016008_02

Start Time:	2016-008T00:00	Stop Time:	2016-009T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016009_02

Start Time:	2016-009T00:00	Stop Time:	2016-010T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016010_02

Start Time:	2016-010T00:00	Stop Time:	2016-011T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016011_02

Start Time:	2016-011T00:00	Stop Time:	2016-012T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016012_02

Start Time:	2016-012T00:00	Stop Time:	2016-013T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016013_02

Start Time:	2016-013T00:00	Stop Time:	2016-014T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016014_02

Start Time:	2016-014T00:00	Stop Time:	2016-015T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016015_02

Start Time:	2016-015T00:00	Stop Time:	2016-016T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016016_02

Start Time:	2016-016T00:00	Stop Time:	2016-017T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016017_02

Start Time:	2016-017T00:00	Stop Time:	2016-018T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016018_02

Start Time:	2016-018T00:00	Stop Time:	2016-019T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016019_02

Start Time:	2016-019T00:00	Stop Time:	2016-020T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016020_02

Start Time:	2016-020T00:00	Stop Time:	2016-021T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016021_02

Start Time:	2016-021T00:00	Stop Time:	2016-022T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016022_02

Start Time:	2016-022T00:00	Stop Time:	2016-023T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016023_02

Start Time:	2016-023T00:00	Stop Time:	2016-024T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016024_02

Start Time:	2016-024T00:00	Stop Time:	2016-025T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016025_02

Start Time:	2016-025T00:00	Stop Time:	2016-026T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016026_02

Start Time:	2016-026T00:00	Stop Time:	2016-027T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016027_02

Start Time:	2016-027T00:00	Stop Time:	2016-028T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016028_02

Start Time:	2016-028T00:00	Stop Time:	2016-029T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016029_02

Start Time:	2016-029T00:00	Stop Time:	2016-030T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016030_02

Start Time:	2016-030T00:00	Stop Time:	2016-031T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016031_02

Start Time:	2016-031T00:00	Stop Time:	2016-032T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016032_02

Start Time:	2016-032T00:00	Stop Time:	2016-033T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016033_02

Start Time:	2016-033T00:00	Stop Time:	2016-034T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016034_02

Start Time:	2016-034T00:00	Stop Time:	2016-035T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016035_02

Start Time:	2016-035T00:00	Stop Time:	2016-036T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016036_02

Start Time:	2016-036T00:00	Stop Time:	2016-037T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016037_02

Start Time:	2016-037T00:00	Stop Time:	2016-038T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016038_02

Start Time:	2016-038T00:00	Stop Time:	2016-039T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016039_02

Start Time:	2016-039T00:00	Stop Time:	2016-040T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016040_02

Start Time:	2016-040T00:00	Stop Time:	2016-041T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016041_02

Start Time:	2016-041T00:00	Stop Time:	2016-042T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016042_02

Start Time:	2016-042T00:00	Stop Time:	2016-043T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016043_02

Start Time:	2016-043T00:00	Stop Time:	2016-044T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016044_02

Start Time:	2016-044T00:00	Stop Time:	2016-045T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016045_02

Start Time:	2016-045T00:00	Stop Time:	2016-046T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016046_02

Start Time:	2016-046T00:00	Stop Time:	2016-047T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016047_02

Start Time:	2016-047T00:00	Stop Time:	2016-048T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016048_02

Start Time:	2016-048T00:00	Stop Time:	2016-049T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016049_02

Start Time:	2016-049T00:00	Stop Time:	2016-050T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016050_02

Start Time:	2016-050T00:00	Stop Time:	2016-051T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016051_02

Start Time:	2016-051T00:00	Stop Time:	2016-052T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016052_02

Start Time:	2016-052T00:00	Stop Time:	2016-053T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016053_02

Start Time:	2016-053T00:00	Stop Time:	2016-054T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016054_02

Start Time:	2016-054T00:00	Stop Time:	2016-055T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016055_02

Start Time:	2016-055T00:00	Stop Time:	2016-056T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016056_02

Start Time:	2016-056T00:00	Stop Time:	2016-057T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016057_02

Start Time:	2016-057T00:00	Stop Time:	2016-058T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016058_02

Start Time:	2016-058T00:00	Stop Time:	2016-059T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016059_02

Start Time:	2016-059T00:00	Stop Time:	2016-060T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016060_02

Start Time:	2016-060T00:00	Stop Time:	2016-061T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016061_02

Start Time:	2016-061T00:00	Stop Time:	2016-062T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016062_02

Start Time:	2016-062T00:00	Stop Time:	2016-063T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016063_02

Start Time:	2016-063T00:00	Stop Time:	2016-064T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016064_02

Start Time:	2016-064T00:00	Stop Time:	2016-065T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016065_02

Start Time:	2016-065T00:00	Stop Time:	2016-066T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016066_02

Start Time:	2016-066T00:00	Stop Time:	2016-067T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016068_02

Start Time:	2016-068T00:00	Stop Time:	2016-069T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016069_02

Start Time:	2016-069T00:00	Stop Time:	2016-070T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016070_02

Start Time:	2016-070T00:00	Stop Time:	2016-071T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016071_02

Start Time:	2016-071T00:00	Stop Time:	2016-072T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016072_02

Start Time:	2016-072T00:00	Stop Time:	2016-073T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016073_02

Start Time:	2016-073T00:00	Stop Time:	2016-074T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016074_02

Start Time:	2016-074T00:00	Stop Time:	2016-075T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016075_02

Start Time:	2016-075T00:00	Stop Time:	2016-076T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016076_02

Start Time:	2016-076T00:00	Stop Time:	2016-077T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016077_02

Start Time:	2016-077T00:00	Stop Time:	2016-078T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016078_02

Start Time:	2016-078T00:00	Stop Time:	2016-079T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016079_02

Start Time:	2016-079T00:00	Stop Time:	2016-080T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016080_02

Start Time:	2016-080T00:00	Stop Time:	2016-081T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016081_02

Start Time:	2016-081T00:00	Stop Time:	2016-082T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016082_02

Start Time:	2016-082T00:00	Stop Time:	2016-083T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016083_02

Start Time:	2016-083T00:00	Stop Time:	2016-084T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016084_02

Start Time:	2016-084T00:00	Stop Time:	2016-085T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016085_02

Start Time:	2016-085T00:00	Stop Time:	2016-086T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016086_02

Start Time:	2016-086T00:00	Stop Time:	2016-087T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016087_02

Start Time:	2016-087T00:00	Stop Time:	2016-088T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016088_02

Start Time:	2016-088T00:00	Stop Time:	2016-089T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016089_02

Start Time:	2016-089T00:00	Stop Time:	2016-090T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016090_02

Start Time:	2016-090T00:00	Stop Time:	2016-091T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016091_02

Start Time:	2016-091T00:00	Stop Time:	2016-092T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016092_02

Start Time:	2016-092T00:00	Stop Time:	2016-093T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016093_02

Start Time:	2016-093T00:00	Stop Time:	2016-094T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016094_02

Start Time:	2016-094T00:00	Stop Time:	2016-095T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016095_02

Start Time:	2016-095T00:00	Stop Time:	2016-096T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016096_02

Start Time:	2016-096T00:00	Stop Time:	2016-097T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016097_02

Start Time:	2016-097T00:00	Stop Time:	2016-098T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016098_02

Start Time:	2016-098T00:00	Stop Time:	2016-099T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016099_02

Start Time:	2016-099T00:00	Stop Time:	2016-100T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016100_02

Start Time:	2016-100T00:00	Stop Time:	2016-101T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016101_02

Start Time:	2016-101T00:00	Stop Time:	2016-102T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016102_02

Start Time:	2016-102T00:00	Stop Time:	2016-103T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016103_02

Start Time:	2016-103T00:00	Stop Time:	2016-104T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016104_02

Start Time:	2016-104T00:00	Stop Time:	2016-105T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016105_02

Start Time:	2016-105T00:00	Stop Time:	2016-106T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016106_02

Start Time:	2016-106T00:00	Stop Time:	2016-107T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016107_02

Start Time:	2016-107T00:00	Stop Time:	2016-108T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016108_02

Start Time:	2016-108T00:00	Stop Time:	2016-109T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016109_02

Start Time:	2016-109T00:00	Stop Time:	2016-110T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016110_02

Start Time:	2016-110T00:00	Stop Time:	2016-111T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016111_02

Start Time:	2016-111T00:00	Stop Time:	2016-112T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016112_02

Start Time:	2016-112T00:00	Stop Time:	2016-113T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016113_02

Start Time:	2016-113T00:00	Stop Time:	2016-114T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016114_02

Start Time:	2016-114T00:00	Stop Time:	2016-115T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016115_02

Start Time:	2016-115T00:00	Stop Time:	2016-116T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016116_02

Start Time:	2016-116T00:00	Stop Time:	2016-117T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016117_02

Start Time:	2016-117T00:00	Stop Time:	2016-118T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016118_02

Start Time:	2016-118T00:00	Stop Time:	2016-119T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016119_02

Start Time:	2016-119T00:00	Stop Time:	2016-120T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016120_02

Start Time:	2016-120T00:00	Stop Time:	2016-121T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016121_02

Start Time:	2016-121T00:00	Stop Time:	2016-122T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016122_02

Start Time:	2016-122T00:00	Stop Time:	2016-123T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016123_02

Start Time:	2016-123T00:00	Stop Time:	2016-124T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016124_02

Start Time:	2016-124T00:00	Stop Time:	2016-125T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016125_02

Start Time:	2016-125T00:00	Stop Time:	2016-126T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016126_02

Start Time:	2016-126T00:00	Stop Time:	2016-127T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016127_02

Start Time:	2016-127T00:00	Stop Time:	2016-128T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016128_02

Start Time:	2016-128T00:00	Stop Time:	2016-129T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016129_02

Start Time:	2016-129T00:00	Stop Time:	2016-130T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016130_02

Start Time:	2016-130T00:00	Stop Time:	2016-131T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016131_02

Start Time:	2016-131T00:00	Stop Time:	2016-132T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016132_02

Start Time:	2016-132T00:00	Stop Time:	2016-133T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016133_02

Start Time:	2016-133T00:00	Stop Time:	2016-134T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016134_02

Start Time:	2016-134T00:00	Stop Time:	2016-135T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016135_02

Start Time:	2016-135T00:00	Stop Time:	2016-136T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016136_02

Start Time:	2016-136T00:00	Stop Time:	2016-137T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016137_02

Start Time:	2016-137T00:00	Stop Time:	2016-138T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016138_02

Start Time:	2016-138T00:00	Stop Time:	2016-139T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016139_02

Start Time:	2016-139T00:00	Stop Time:	2016-140T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016140_02

Start Time:	2016-140T00:00	Stop Time:	2016-141T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016141_02

Start Time:	2016-141T00:00	Stop Time:	2016-142T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016142_02

Start Time:	2016-142T00:00	Stop Time:	2016-143T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016143_02

Start Time:	2016-143T00:00	Stop Time:	2016-144T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016144_02

Start Time:	2016-144T00:00	Stop Time:	2016-145T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016150_02

Start Time:	2016-150T00:00	Stop Time:	2016-151T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016151_02

Start Time:	2016-151T00:00	Stop Time:	2016-152T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016152_02

Start Time:	2016-152T00:00	Stop Time:	2016-153T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016153_02

Start Time:	2016-153T00:00	Stop Time:	2016-154T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016154_02

Start Time:	2016-154T00:00	Stop Time:	2016-155T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016155_02

Start Time:	2016-155T00:00	Stop Time:	2016-156T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016156_02

Start Time:	2016-156T00:00	Stop Time:	2016-157T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016157_02

Start Time:	2016-157T00:00	Stop Time:	2016-158T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016158_02

Start Time:	2016-158T00:00	Stop Time:	2016-159T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016159_02

Start Time:	2016-159T00:00	Stop Time:	2016-160T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016160_02

Start Time:	2016-160T00:00	Stop Time:	2016-161T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016161_02

Start Time:	2016-161T00:00	Stop Time:	2016-162T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016162_02

Start Time:	2016-162T00:00	Stop Time:	2016-163T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016163_02

Start Time:	2016-163T00:00	Stop Time:	2016-164T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016164_02

Start Time:	2016-164T00:00	Stop Time:	2016-165T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016165_02

Start Time:	2016-165T00:00	Stop Time:	2016-166T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016166_02

Start Time:	2016-166T00:00	Stop Time:	2016-167T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016167_02

Start Time:	2016-167T00:00	Stop Time:	2016-168T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016168_02

Start Time:	2016-168T00:00	Stop Time:	2016-169T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016169_02

Start Time:	2016-169T00:00	Stop Time:	2016-170T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016170_02

Start Time:	2016-170T00:00	Stop Time:	2016-171T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016171_02

Start Time:	2016-171T00:00	Stop Time:	2016-172T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016172_02

Start Time:	2016-172T00:00	Stop Time:	2016-173T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016173_02

Start Time:	2016-173T00:00	Stop Time:	2016-174T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016174_02

Start Time:	2016-174T00:00	Stop Time:	2016-175T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016175_02

Start Time:	2016-175T00:00	Stop Time:	2016-176T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016176_02

Start Time:	2016-176T00:00	Stop Time:	2016-177T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016177_02

Start Time:	2016-177T00:00	Stop Time:	2016-178T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016178_02

Start Time:	2016-178T00:00	Stop Time:	2016-179T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016179_02

Start Time:	2016-179T00:00	Stop Time:	2016-180T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016180_02

Start Time:	2016-180T00:00	Stop Time:	2016-181T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016181_02

Start Time:	2016-181T00:00	Stop Time:	2016-182T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016182_02

Start Time:	2016-182T00:00	Stop Time:	2016-183T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016183_02

Start Time:	2016-183T00:00	Stop Time:	2016-184T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016184_02

Start Time:	2016-184T00:00	Stop Time:	2016-185T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016185_02

Start Time:	2016-185T00:00	Stop Time:	2016-186T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016186_02

Start Time:	2016-186T00:00	Stop Time:	2016-187T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016187_02

Start Time:	2016-187T00:00	Stop Time:	2016-188T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016188_02

Start Time:	2016-188T00:00	Stop Time:	2016-189T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016189_02

Start Time:	2016-189T00:00	Stop Time:	2016-190T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016190_02

Start Time:	2016-190T00:00	Stop Time:	2016-191T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016191_02

Start Time:	2016-191T00:00	Stop Time:	2016-192T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016192_02

Start Time:	2016-192T00:00	Stop Time:	2016-193T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016193_02

Start Time:	2016-193T00:00	Stop Time:	2016-194T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016194_02

Start Time:	2016-194T00:00	Stop Time:	2016-195T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016195_02

Start Time:	2016-195T00:00	Stop Time:	2016-196T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016196_02

Start Time:	2016-196T00:00	Stop Time:	2016-197T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016197_02

Start Time:	2016-197T00:00	Stop Time:	2016-198T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016198_02

Start Time:	2016-198T00:00	Stop Time:	2016-199T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016199_02

Start Time:	2016-199T00:00	Stop Time:	2016-200T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016200_02

Start Time:	2016-200T00:00	Stop Time:	2016-201T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016201_02

Start Time:	2016-201T00:00	Stop Time:	2016-202T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016202_02

Start Time:	2016-202T00:00	Stop Time:	2016-203T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016203_02

Start Time:	2016-203T00:00	Stop Time:	2016-204T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016204_02

Start Time:	2016-204T00:00	Stop Time:	2016-205T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016205_02

Start Time:	2016-205T00:00	Stop Time:	2016-206T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016206_02

Start Time:	2016-206T00:00	Stop Time:	2016-207T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016207_02

Start Time:	2016-207T00:00	Stop Time:	2016-208T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016208_02

Start Time:	2016-208T00:00	Stop Time:	2016-209T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016209_02

Start Time:	2016-209T00:00	Stop Time:	2016-210T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016210_02

Start Time:	2016-210T00:00	Stop Time:	2016-211T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016211_02

Start Time:	2016-211T00:00	Stop Time:	2016-212T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016212_02

Start Time:	2016-212T00:00	Stop Time:	2016-213T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016213_02

Start Time:	2016-213T00:00	Stop Time:	2016-214T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016214_02

Start Time:	2016-214T00:00	Stop Time:	2016-215T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016215_02

Start Time:	2016-215T00:00	Stop Time:	2016-216T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016216_02

Start Time:	2016-216T00:00	Stop Time:	2016-217T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016217_02

Start Time:	2016-217T00:00	Stop Time:	2016-218T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016218_02

Start Time:	2016-218T00:00	Stop Time:	2016-219T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016219_02

Start Time:	2016-219T00:00	Stop Time:	2016-220T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016220_02

Start Time:	2016-220T00:00	Stop Time:	2016-221T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016221_02

Start Time:	2016-221T00:00	Stop Time:	2016-222T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016222_02

Start Time:	2016-222T00:00	Stop Time:	2016-223T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016223_02

Start Time:	2016-223T00:00	Stop Time:	2016-224T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016224_02

Start Time:	2016-224T00:00	Stop Time:	2016-225T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016225_02

Start Time:	2016-225T00:00	Stop Time:	2016-226T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016226_02

Start Time:	2016-226T00:00	Stop Time:	2016-227T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016227_02

Start Time:	2016-227T00:00	Stop Time:	2016-228T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016228_02

Start Time:	2016-228T00:00	Stop Time:	2016-229T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016229_02

Start Time:	2016-229T00:00	Stop Time:	2016-230T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016230_02

Start Time:	2016-230T00:00	Stop Time:	2016-231T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016231_02

Start Time:	2016-231T00:00	Stop Time:	2016-232T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016232_02

Start Time:	2016-232T00:00	Stop Time:	2016-233T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016233_02

Start Time:	2016-233T00:00	Stop Time:	2016-234T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016234_02

Start Time:	2016-234T00:00	Stop Time:	2016-235T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016235_02

Start Time:	2016-235T00:00	Stop Time:	2016-236T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016236_02

Start Time:	2016-236T00:00	Stop Time:	2016-237T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016237_02

Start Time:	2016-237T00:00	Stop Time:	2016-238T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016238_02

Start Time:	2016-238T00:00	Stop Time:	2016-239T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016239_02

Start Time:	2016-239T00:00	Stop Time:	2016-240T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016240_02

Start Time:	2016-240T00:00	Stop Time:	2016-241T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016241_02

Start Time:	2016-241T00:00	Stop Time:	2016-242T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016242_02

Start Time:	2016-242T00:00	Stop Time:	2016-243T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016243_02

Start Time:	2016-243T00:00	Stop Time:	2016-244T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016244_02

Start Time:	2016-244T00:00	Stop Time:	2016-245T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016245_02

Start Time:	2016-245T00:00	Stop Time:	2016-246T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016246_02

Start Time:	2016-246T00:00	Stop Time:	2016-247T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016247_02

Start Time:	2016-247T00:00	Stop Time:	2016-248T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016248_02

Start Time:	2016-248T00:00	Stop Time:	2016-249T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016249_02

Start Time:	2016-249T00:00	Stop Time:	2016-250T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016250_02

Start Time:	2016-250T00:00	Stop Time:	2016-251T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016251_02

Start Time:	2016-251T00:00	Stop Time:	2016-252T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016252_02

Start Time:	2016-252T00:00	Stop Time:	2016-253T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016253_02

Start Time:	2016-253T00:00	Stop Time:	2016-254T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016254_02

Start Time:	2016-254T00:00	Stop Time:	2016-255T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016255_02

Start Time:	2016-255T00:00	Stop Time:	2016-256T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016256_02

Start Time:	2016-256T00:00	Stop Time:	2016-257T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016257_02

Start Time:	2016-257T00:00	Stop Time:	2016-258T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016258_02

Start Time:	2016-258T00:00	Stop Time:	2016-259T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016259_02

Start Time:	2016-259T00:00	Stop Time:	2016-260T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016260_02

Start Time:	2016-260T00:00	Stop Time:	2016-261T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016261_02

Start Time:	2016-261T00:00	Stop Time:	2016-262T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016262_02

Start Time:	2016-262T00:00	Stop Time:	2016-263T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016263_02

Start Time:	2016-263T00:00	Stop Time:	2016-264T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016264_02

Start Time:	2016-264T00:00	Stop Time:	2016-265T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016265_02

Start Time:	2016-265T00:00	Stop Time:	2016-266T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016266_02

Start Time:	2016-266T00:00	Stop Time:	2016-267T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016267_02

Start Time:	2016-267T00:00	Stop Time:	2016-268T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016268_02

Start Time:	2016-268T00:00	Stop Time:	2016-269T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016269_02

Start Time:	2016-269T00:00	Stop Time:	2016-270T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016270_02

Start Time:	2016-270T00:00	Stop Time:	2016-271T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016271_02

Start Time:	2016-271T00:00	Stop Time:	2016-272T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016272_02

Start Time:	2016-272T00:00	Stop Time:	2016-273T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016273_02

Start Time:	2016-273T00:00	Stop Time:	2016-274T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016274_02

Start Time:	2016-274T00:00	Stop Time:	2016-275T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016275_02

Start Time:	2016-275T00:00	Stop Time:	2016-276T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016276_02

Start Time:	2016-276T00:00	Stop Time:	2016-277T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016277_02

Start Time:	2016-277T00:00	Stop Time:	2016-278T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016278_02

Start Time:	2016-278T00:00	Stop Time:	2016-279T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016279_02

Start Time:	2016-279T00:00	Stop Time:	2016-280T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016280_02

Start Time:	2016-280T00:00	Stop Time:	2016-281T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016281_02

Start Time:	2016-281T00:00	Stop Time:	2016-282T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016282_02

Start Time:	2016-282T00:00	Stop Time:	2016-283T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016283_02

Start Time:	2016-283T00:00	Stop Time:	2016-284T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016284_02

Start Time:	2016-284T00:00	Stop Time:	2016-285T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016285_02

Start Time:	2016-285T00:00	Stop Time:	2016-286T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016286_02

Start Time:	2016-286T00:00	Stop Time:	2016-287T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016287_02

Start Time:	2016-287T00:00	Stop Time:	2016-288T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016288_02

Start Time:	2016-288T00:00	Stop Time:	2016-289T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016289_02

Start Time:	2016-289T00:00	Stop Time:	2016-290T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016290_02

Start Time:	2016-290T00:00	Stop Time:	2016-291T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016291_02

Start Time:	2016-291T00:00	Stop Time:	2016-292T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016292_02

Start Time:	2016-292T00:00	Stop Time:	2016-293T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016293_02

Start Time:	2016-293T00:00	Stop Time:	2016-294T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016294_02

Start Time:	2016-294T00:00	Stop Time:	2016-295T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016295_02

Start Time:	2016-295T00:00	Stop Time:	2016-296T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016296_02

Start Time:	2016-296T00:00	Stop Time:	2016-297T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016297_02

Start Time:	2016-297T00:00	Stop Time:	2016-298T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016298_02

Start Time:	2016-298T00:00	Stop Time:	2016-299T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016299_02

Start Time:	2016-299T00:00	Stop Time:	2016-300T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016300_02

Start Time:	2016-300T00:00	Stop Time:	2016-301T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016301_02

Start Time:	2016-301T00:00	Stop Time:	2016-302T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016302_02

Start Time:	2016-302T00:00	Stop Time:	2016-303T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016303_02

Start Time:	2016-303T00:00	Stop Time:	2016-304T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016304_02

Start Time:	2016-304T00:00	Stop Time:	2016-305T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016305_02

Start Time:	2016-305T00:00	Stop Time:	2016-306T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016306_02

Start Time:	2016-306T00:00	Stop Time:	2016-307T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016307_02

Start Time:	2016-307T00:00	Stop Time:	2016-308T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016308_02

Start Time:	2016-308T00:00	Stop Time:	2016-309T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016309_02

Start Time:	2016-309T00:00	Stop Time:	2016-310T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016310_02

Start Time:	2016-310T00:00	Stop Time:	2016-311T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016311_02

Start Time:	2016-311T00:00	Stop Time:	2016-312T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016312_02

Start Time:	2016-312T00:00	Stop Time:	2016-313T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016313_02

Start Time:	2016-313T00:00	Stop Time:	2016-314T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016314_02

Start Time:	2016-314T00:00	Stop Time:	2016-315T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016315_02

Start Time:	2016-315T00:00	Stop Time:	2016-316T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016316_02

Start Time:	2016-316T00:00	Stop Time:	2016-317T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016317_02

Start Time:	2016-317T00:00	Stop Time:	2016-318T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016318_02

Start Time:	2016-318T00:00	Stop Time:	2016-319T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016319_02

Start Time:	2016-319T00:00	Stop Time:	2016-320T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016320_02

Start Time:	2016-320T00:00	Stop Time:	2016-321T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016321_02

Start Time:	2016-321T00:00	Stop Time:	2016-322T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016322_02

Start Time:	2016-322T00:00	Stop Time:	2016-323T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016323_02

Start Time:	2016-323T00:00	Stop Time:	2016-324T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016324_02

Start Time:	2016-324T00:00	Stop Time:	2016-325T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016325_02

Start Time:	2016-325T00:00	Stop Time:	2016-326T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016326_02

Start Time:	2016-326T00:00	Stop Time:	2016-327T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016327_02

Start Time:	2016-327T00:00	Stop Time:	2016-328T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016328_02

Start Time:	2016-328T00:00	Stop Time:	2016-329T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016329_02

Start Time:	2016-329T00:00	Stop Time:	2016-330T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016330_02

Start Time:	2016-330T00:00	Stop Time:	2016-331T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016331_02

Start Time:	2016-331T00:00	Stop Time:	2016-332T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016332_02

Start Time:	2016-332T00:00	Stop Time:	2016-333T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016333_02

Start Time:	2016-333T00:00	Stop Time:	2016-334T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016334_02

Start Time:	2016-334T00:00	Stop Time:	2016-335T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016335_02

Start Time:	2016-335T00:00	Stop Time:	2016-336T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016336_02

Start Time:	2016-336T00:00	Stop Time:	2016-337T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016337_02

Start Time:	2016-337T00:00	Stop Time:	2016-338T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016338_02

Start Time:	2016-338T00:00	Stop Time:	2016-339T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016339_02

Start Time:	2016-339T00:00	Stop Time:	2016-340T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016340_02

Start Time:	2016-340T00:00	Stop Time:	2016-341T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016341_02

Start Time:	2016-341T00:00	Stop Time:	2016-342T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016342_02

Start Time:	2016-342T00:00	Stop Time:	2016-343T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016343_02

Start Time:	2016-343T00:00	Stop Time:	2016-344T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016344_02

Start Time:	2016-344T00:00	Stop Time:	2016-345T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016345_02

Start Time:	2016-345T00:00	Stop Time:	2016-346T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016346_02

Start Time:	2016-346T00:00	Stop Time:	2016-347T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016347_02

Start Time:	2016-347T00:00	Stop Time:	2016-348T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016348_02

Start Time:	2016-348T00:00	Stop Time:	2016-349T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016349_02

Start Time:	2016-349T00:00	Stop Time:	2016-350T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016350_02

Start Time:	2016-350T00:00	Stop Time:	2016-351T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016351_02

Start Time:	2016-351T00:00	Stop Time:	2016-352T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016352_02

Start Time:	2016-352T00:00	Stop Time:	2016-353T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016353_02

Start Time:	2016-353T00:00	Stop Time:	2016-354T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016354_02

Start Time:	2016-354T00:00	Stop Time:	2016-355T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016355_02

Start Time:	2016-355T00:00	Stop Time:	2016-356T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016356_02

Start Time:	2016-356T00:00	Stop Time:	2016-357T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016357_02

Start Time:	2016-357T00:00	Stop Time:	2016-358T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016358_02

Start Time:	2016-358T00:00	Stop Time:	2016-359T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016359_02

Start Time:	2016-359T00:00	Stop Time:	2016-360T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016360_02

Start Time:	2016-360T00:00	Stop Time:	2016-361T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016361_02

Start Time:	2016-361T00:00	Stop Time:	2016-362T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016362_02

Start Time:	2016-362T00:00	Stop Time:	2016-363T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016363_02

Start Time:	2016-363T00:00	Stop Time:	2016-364T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016364_02

Start Time:	2016-364T00:00	Stop Time:	2016-365T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016365_02

Start Time:	2016-365T00:00	Stop Time:	2016-366T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2016366_02

Start Time:	2016-366T00:00	Stop Time:	2017-001T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in