PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LPHAAVG0_1MIN/ 2012 /

LPHAAVG0_1MIN_2012001_01

Start Time:	2012-001T00:00	Stop Time:	2012-002T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012002_01

Start Time:	2012-002T00:00	Stop Time:	2012-003T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012003_01

Start Time:	2012-003T00:00	Stop Time:	2012-004T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012004_01

Start Time:	2012-004T00:00	Stop Time:	2012-005T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012005_01

Start Time:	2012-005T00:00	Stop Time:	2012-006T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012006_01

Start Time:	2012-006T00:00	Stop Time:	2012-007T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012007_01

Start Time:	2012-007T00:00	Stop Time:	2012-008T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012008_01

Start Time:	2012-008T00:00	Stop Time:	2012-009T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012009_01

Start Time:	2012-009T00:00	Stop Time:	2012-010T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012010_01

Start Time:	2012-010T00:00	Stop Time:	2012-011T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012011_01

Start Time:	2012-011T00:00	Stop Time:	2012-012T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012012_01

Start Time:	2012-012T00:00	Stop Time:	2012-013T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012013_01

Start Time:	2012-013T00:00	Stop Time:	2012-014T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012014_01

Start Time:	2012-014T00:00	Stop Time:	2012-015T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012015_01

Start Time:	2012-015T00:00	Stop Time:	2012-016T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012016_01

Start Time:	2012-016T00:00	Stop Time:	2012-017T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012017_01

Start Time:	2012-017T00:00	Stop Time:	2012-018T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012018_01

Start Time:	2012-018T00:00	Stop Time:	2012-019T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012019_01

Start Time:	2012-019T00:00	Stop Time:	2012-020T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012020_01

Start Time:	2012-020T00:00	Stop Time:	2012-021T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012021_01

Start Time:	2012-021T00:00	Stop Time:	2012-022T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012022_01

Start Time:	2012-022T00:00	Stop Time:	2012-023T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012023_01

Start Time:	2012-023T00:00	Stop Time:	2012-024T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012024_01

Start Time:	2012-024T00:00	Stop Time:	2012-025T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012025_01

Start Time:	2012-025T00:00	Stop Time:	2012-026T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012026_01

Start Time:	2012-026T00:00	Stop Time:	2012-027T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012027_01

Start Time:	2012-027T00:00	Stop Time:	2012-028T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012028_01

Start Time:	2012-028T00:00	Stop Time:	2012-029T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012029_01

Start Time:	2012-029T00:00	Stop Time:	2012-030T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012030_01

Start Time:	2012-030T00:00	Stop Time:	2012-031T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012031_01

Start Time:	2012-031T00:00	Stop Time:	2012-032T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012032_01

Start Time:	2012-032T00:00	Stop Time:	2012-033T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012033_01

Start Time:	2012-033T00:00	Stop Time:	2012-034T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012034_01

Start Time:	2012-034T00:00	Stop Time:	2012-035T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012035_01

Start Time:	2012-035T00:00	Stop Time:	2012-036T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012036_01

Start Time:	2012-036T00:00	Stop Time:	2012-037T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012037_01

Start Time:	2012-037T00:00	Stop Time:	2012-038T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012038_01

Start Time:	2012-038T00:00	Stop Time:	2012-039T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012039_01

Start Time:	2012-039T00:00	Stop Time:	2012-040T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012040_01

Start Time:	2012-040T00:00	Stop Time:	2012-041T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012041_01

Start Time:	2012-041T00:00	Stop Time:	2012-042T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012042_01

Start Time:	2012-042T00:00	Stop Time:	2012-043T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012043_01

Start Time:	2012-043T00:00	Stop Time:	2012-044T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012044_01

Start Time:	2012-044T00:00	Stop Time:	2012-045T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012045_01

Start Time:	2012-045T00:00	Stop Time:	2012-046T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012046_01

Start Time:	2012-046T00:00	Stop Time:	2012-047T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012047_01

Start Time:	2012-047T00:00	Stop Time:	2012-048T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012048_01

Start Time:	2012-048T00:00	Stop Time:	2012-049T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012049_01

Start Time:	2012-049T00:00	Stop Time:	2012-050T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012050_01

Start Time:	2012-050T00:00	Stop Time:	2012-051T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012051_01

Start Time:	2012-051T00:00	Stop Time:	2012-052T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012052_01

Start Time:	2012-052T00:00	Stop Time:	2012-053T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012053_01

Start Time:	2012-053T00:00	Stop Time:	2012-054T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012054_01

Start Time:	2012-054T00:00	Stop Time:	2012-055T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012055_01

Start Time:	2012-055T00:00	Stop Time:	2012-056T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012056_01

Start Time:	2012-056T00:00	Stop Time:	2012-057T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012057_01

Start Time:	2012-057T00:00	Stop Time:	2012-058T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012058_01

Start Time:	2012-058T00:00	Stop Time:	2012-059T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012059_01

Start Time:	2012-059T00:00	Stop Time:	2012-060T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012060_01

Start Time:	2012-060T00:00	Stop Time:	2012-061T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012061_01

Start Time:	2012-061T00:00	Stop Time:	2012-062T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012062_01

Start Time:	2012-062T00:00	Stop Time:	2012-063T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012063_01

Start Time:	2012-063T00:00	Stop Time:	2012-064T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012064_01

Start Time:	2012-064T00:00	Stop Time:	2012-065T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012065_01

Start Time:	2012-065T00:00	Stop Time:	2012-066T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012066_01

Start Time:	2012-066T00:00	Stop Time:	2012-067T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012067_01

Start Time:	2012-067T00:00	Stop Time:	2012-068T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012068_01

Start Time:	2012-068T00:00	Stop Time:	2012-069T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012069_01

Start Time:	2012-069T00:00	Stop Time:	2012-070T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012070_01

Start Time:	2012-070T00:00	Stop Time:	2012-071T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012071_01

Start Time:	2012-071T00:00	Stop Time:	2012-072T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012072_01

Start Time:	2012-072T00:00	Stop Time:	2012-073T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012073_01

Start Time:	2012-073T00:00	Stop Time:	2012-074T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012074_01

Start Time:	2012-074T00:00	Stop Time:	2012-075T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012075_01

Start Time:	2012-075T00:00	Stop Time:	2012-076T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012076_01

Start Time:	2012-076T00:00	Stop Time:	2012-077T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012077_01

Start Time:	2012-077T00:00	Stop Time:	2012-078T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012078_01

Start Time:	2012-078T00:00	Stop Time:	2012-079T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012079_01

Start Time:	2012-079T00:00	Stop Time:	2012-080T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012080_01

Start Time:	2012-080T00:00	Stop Time:	2012-081T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012081_01

Start Time:	2012-081T00:00	Stop Time:	2012-082T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012082_01

Start Time:	2012-082T00:00	Stop Time:	2012-083T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012083_01

Start Time:	2012-083T00:00	Stop Time:	2012-084T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012084_01

Start Time:	2012-084T00:00	Stop Time:	2012-085T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012085_01

Start Time:	2012-085T00:00	Stop Time:	2012-086T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012086_01

Start Time:	2012-086T00:00	Stop Time:	2012-087T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012087_01

Start Time:	2012-087T00:00	Stop Time:	2012-088T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012088_01

Start Time:	2012-088T00:00	Stop Time:	2012-089T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012089_01

Start Time:	2012-089T00:00	Stop Time:	2012-090T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012090_01

Start Time:	2012-090T00:00	Stop Time:	2012-091T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012091_01

Start Time:	2012-091T00:00	Stop Time:	2012-092T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012092_01

Start Time:	2012-092T00:00	Stop Time:	2012-093T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012093_01

Start Time:	2012-093T00:00	Stop Time:	2012-094T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012094_01

Start Time:	2012-094T00:00	Stop Time:	2012-095T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012095_01

Start Time:	2012-095T00:00	Stop Time:	2012-096T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012096_01

Start Time:	2012-096T00:00	Stop Time:	2012-097T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012097_01

Start Time:	2012-097T00:00	Stop Time:	2012-098T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012098_01

Start Time:	2012-098T00:00	Stop Time:	2012-099T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012099_01

Start Time:	2012-099T00:00	Stop Time:	2012-100T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012100_01

Start Time:	2012-100T00:00	Stop Time:	2012-101T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012101_01

Start Time:	2012-101T00:00	Stop Time:	2012-102T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012102_01

Start Time:	2012-102T00:00	Stop Time:	2012-103T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012103_01

Start Time:	2012-103T00:00	Stop Time:	2012-104T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012104_01

Start Time:	2012-104T00:00	Stop Time:	2012-105T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012105_01

Start Time:	2012-105T00:00	Stop Time:	2012-106T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012106_01

Start Time:	2012-106T00:00	Stop Time:	2012-107T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012107_01

Start Time:	2012-107T00:00	Stop Time:	2012-108T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012108_01

Start Time:	2012-108T00:00	Stop Time:	2012-109T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012109_01

Start Time:	2012-109T00:00	Stop Time:	2012-110T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012110_01

Start Time:	2012-110T00:00	Stop Time:	2012-111T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012111_01

Start Time:	2012-111T00:00	Stop Time:	2012-112T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012112_01

Start Time:	2012-112T00:00	Stop Time:	2012-113T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012113_01

Start Time:	2012-113T00:00	Stop Time:	2012-114T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012114_01

Start Time:	2012-114T00:00	Stop Time:	2012-115T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012115_01

Start Time:	2012-115T00:00	Stop Time:	2012-116T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012116_01

Start Time:	2012-116T00:00	Stop Time:	2012-117T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012117_01

Start Time:	2012-117T00:00	Stop Time:	2012-118T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012118_01

Start Time:	2012-118T00:00	Stop Time:	2012-119T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012119_01

Start Time:	2012-119T00:00	Stop Time:	2012-120T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012120_01

Start Time:	2012-120T00:00	Stop Time:	2012-121T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012121_01

Start Time:	2012-121T00:00	Stop Time:	2012-122T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012122_01

Start Time:	2012-122T00:00	Stop Time:	2012-123T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012123_01

Start Time:	2012-123T00:00	Stop Time:	2012-124T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012124_01

Start Time:	2012-124T00:00	Stop Time:	2012-125T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012125_01

Start Time:	2012-125T00:00	Stop Time:	2012-126T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012126_01

Start Time:	2012-126T00:00	Stop Time:	2012-127T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012127_01

Start Time:	2012-127T00:00	Stop Time:	2012-128T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012128_01

Start Time:	2012-128T00:00	Stop Time:	2012-129T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012129_01

Start Time:	2012-129T00:00	Stop Time:	2012-130T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012130_01

Start Time:	2012-130T00:00	Stop Time:	2012-131T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012131_01

Start Time:	2012-131T00:00	Stop Time:	2012-132T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012132_01

Start Time:	2012-132T00:00	Stop Time:	2012-133T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012133_01

Start Time:	2012-133T00:00	Stop Time:	2012-134T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012134_01

Start Time:	2012-134T00:00	Stop Time:	2012-135T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012135_01

Start Time:	2012-135T00:00	Stop Time:	2012-136T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012136_01

Start Time:	2012-136T00:00	Stop Time:	2012-137T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012137_01

Start Time:	2012-137T00:00	Stop Time:	2012-138T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012138_01

Start Time:	2012-138T00:00	Stop Time:	2012-139T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012139_01

Start Time:	2012-139T00:00	Stop Time:	2012-140T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012140_01

Start Time:	2012-140T00:00	Stop Time:	2012-141T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012141_01

Start Time:	2012-141T00:00	Stop Time:	2012-142T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012142_01

Start Time:	2012-142T00:00	Stop Time:	2012-143T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012143_01

Start Time:	2012-143T00:00	Stop Time:	2012-144T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012144_01

Start Time:	2012-144T00:00	Stop Time:	2012-145T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012145_01

Start Time:	2012-145T00:00	Stop Time:	2012-146T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012146_01

Start Time:	2012-146T00:00	Stop Time:	2012-147T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012147_01

Start Time:	2012-147T00:00	Stop Time:	2012-148T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012148_01

Start Time:	2012-148T00:00	Stop Time:	2012-149T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012149_01

Start Time:	2012-149T00:00	Stop Time:	2012-150T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012150_01

Start Time:	2012-150T00:00	Stop Time:	2012-151T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012151_01

Start Time:	2012-151T00:00	Stop Time:	2012-152T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012152_01

Start Time:	2012-152T00:00	Stop Time:	2012-153T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012153_01

Start Time:	2012-153T00:00	Stop Time:	2012-154T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012154_01

Start Time:	2012-154T00:00	Stop Time:	2012-155T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012155_01

Start Time:	2012-155T00:00	Stop Time:	2012-156T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012156_01

Start Time:	2012-156T00:00	Stop Time:	2012-157T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012157_01

Start Time:	2012-157T00:00	Stop Time:	2012-158T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012158_01

Start Time:	2012-158T00:00	Stop Time:	2012-159T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012159_01

Start Time:	2012-159T00:00	Stop Time:	2012-160T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012160_01

Start Time:	2012-160T00:00	Stop Time:	2012-161T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012161_01

Start Time:	2012-161T00:00	Stop Time:	2012-162T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012162_01

Start Time:	2012-162T00:00	Stop Time:	2012-163T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012163_01

Start Time:	2012-163T00:00	Stop Time:	2012-164T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012164_01

Start Time:	2012-164T00:00	Stop Time:	2012-165T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012165_01

Start Time:	2012-165T00:00	Stop Time:	2012-166T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012166_01

Start Time:	2012-166T00:00	Stop Time:	2012-167T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012167_01

Start Time:	2012-167T00:00	Stop Time:	2012-168T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012168_01

Start Time:	2012-168T00:00	Stop Time:	2012-169T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012169_01

Start Time:	2012-169T00:00	Stop Time:	2012-170T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012170_01

Start Time:	2012-170T00:00	Stop Time:	2012-171T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012171_01

Start Time:	2012-171T00:00	Stop Time:	2012-172T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012172_01

Start Time:	2012-172T00:00	Stop Time:	2012-173T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012173_01

Start Time:	2012-173T00:00	Stop Time:	2012-174T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012174_01

Start Time:	2012-174T00:00	Stop Time:	2012-175T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012175_01

Start Time:	2012-175T00:00	Stop Time:	2012-176T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012176_01

Start Time:	2012-176T00:00	Stop Time:	2012-177T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012177_01

Start Time:	2012-177T00:00	Stop Time:	2012-178T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012178_01

Start Time:	2012-178T00:00	Stop Time:	2012-179T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012179_01

Start Time:	2012-179T00:00	Stop Time:	2012-180T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012180_01

Start Time:	2012-180T00:00	Stop Time:	2012-181T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012181_01

Start Time:	2012-181T00:00	Stop Time:	2012-182T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012182_01

Start Time:	2012-182T00:00	Stop Time:	2012-183T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012183_02

Start Time:	2012-183T00:00	Stop Time:	2012-184T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012184_02

Start Time:	2012-184T00:00	Stop Time:	2012-185T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012185_02

Start Time:	2012-185T00:00	Stop Time:	2012-186T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012186_02

Start Time:	2012-186T00:00	Stop Time:	2012-187T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012187_02

Start Time:	2012-187T00:00	Stop Time:	2012-188T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012188_02

Start Time:	2012-188T00:00	Stop Time:	2012-189T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012189_02

Start Time:	2012-189T00:00	Stop Time:	2012-190T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012190_02

Start Time:	2012-190T00:00	Stop Time:	2012-191T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012191_02

Start Time:	2012-191T00:00	Stop Time:	2012-192T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012192_02

Start Time:	2012-192T00:00	Stop Time:	2012-193T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012193_02

Start Time:	2012-193T00:00	Stop Time:	2012-194T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012194_02

Start Time:	2012-194T00:00	Stop Time:	2012-195T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012195_02

Start Time:	2012-195T00:00	Stop Time:	2012-196T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012196_02

Start Time:	2012-196T00:00	Stop Time:	2012-197T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012197_02

Start Time:	2012-197T00:00	Stop Time:	2012-198T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012198_02

Start Time:	2012-198T00:00	Stop Time:	2012-199T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012199_02

Start Time:	2012-199T00:00	Stop Time:	2012-200T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012200_02

Start Time:	2012-200T00:00	Stop Time:	2012-201T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012201_02

Start Time:	2012-201T00:00	Stop Time:	2012-202T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012202_02

Start Time:	2012-202T00:00	Stop Time:	2012-203T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012203_02

Start Time:	2012-203T00:00	Stop Time:	2012-204T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012204_02

Start Time:	2012-204T00:00	Stop Time:	2012-205T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012205_02

Start Time:	2012-205T00:00	Stop Time:	2012-206T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012206_02

Start Time:	2012-206T00:00	Stop Time:	2012-207T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012207_02

Start Time:	2012-207T00:00	Stop Time:	2012-208T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012208_02

Start Time:	2012-208T00:00	Stop Time:	2012-209T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012209_02

Start Time:	2012-209T00:00	Stop Time:	2012-210T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012210_02

Start Time:	2012-210T00:00	Stop Time:	2012-211T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012211_02

Start Time:	2012-211T00:00	Stop Time:	2012-212T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012212_02

Start Time:	2012-212T00:00	Stop Time:	2012-213T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012213_02

Start Time:	2012-213T00:00	Stop Time:	2012-214T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012214_02

Start Time:	2012-214T00:00	Stop Time:	2012-215T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012215_02

Start Time:	2012-215T00:00	Stop Time:	2012-216T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012216_02

Start Time:	2012-216T00:00	Stop Time:	2012-217T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012217_02

Start Time:	2012-217T00:00	Stop Time:	2012-218T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012218_02

Start Time:	2012-218T00:00	Stop Time:	2012-219T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012219_02

Start Time:	2012-219T00:00	Stop Time:	2012-220T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012220_02

Start Time:	2012-220T00:00	Stop Time:	2012-221T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012221_02

Start Time:	2012-221T00:00	Stop Time:	2012-222T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012222_02

Start Time:	2012-222T00:00	Stop Time:	2012-223T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012223_02

Start Time:	2012-223T00:00	Stop Time:	2012-224T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012224_02

Start Time:	2012-224T00:00	Stop Time:	2012-225T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012225_02

Start Time:	2012-225T00:00	Stop Time:	2012-226T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012226_02

Start Time:	2012-226T00:00	Stop Time:	2012-227T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012227_02

Start Time:	2012-227T00:00	Stop Time:	2012-228T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012228_02

Start Time:	2012-228T00:00	Stop Time:	2012-229T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012229_02

Start Time:	2012-229T00:00	Stop Time:	2012-230T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012230_02

Start Time:	2012-230T00:00	Stop Time:	2012-231T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012231_02

Start Time:	2012-231T00:00	Stop Time:	2012-232T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012232_02

Start Time:	2012-232T00:00	Stop Time:	2012-233T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012233_02

Start Time:	2012-233T00:00	Stop Time:	2012-234T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012234_02

Start Time:	2012-234T00:00	Stop Time:	2012-235T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012235_02

Start Time:	2012-235T00:00	Stop Time:	2012-236T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012236_02

Start Time:	2012-236T00:00	Stop Time:	2012-237T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012237_02

Start Time:	2012-237T00:00	Stop Time:	2012-238T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012238_02

Start Time:	2012-238T00:00	Stop Time:	2012-239T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012239_02

Start Time:	2012-239T00:00	Stop Time:	2012-240T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012240_02

Start Time:	2012-240T00:00	Stop Time:	2012-241T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012241_02

Start Time:	2012-241T00:00	Stop Time:	2012-242T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012242_02

Start Time:	2012-242T00:00	Stop Time:	2012-243T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012243_02

Start Time:	2012-243T00:00	Stop Time:	2012-244T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012244_02

Start Time:	2012-244T00:00	Stop Time:	2012-245T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012245_02

Start Time:	2012-245T00:00	Stop Time:	2012-246T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012246_02

Start Time:	2012-246T00:00	Stop Time:	2012-247T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012247_02

Start Time:	2012-247T00:00	Stop Time:	2012-248T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012248_02

Start Time:	2012-248T00:00	Stop Time:	2012-249T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012249_02

Start Time:	2012-249T00:00	Stop Time:	2012-250T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012250_02

Start Time:	2012-250T00:00	Stop Time:	2012-251T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012251_02

Start Time:	2012-251T00:00	Stop Time:	2012-252T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012252_02

Start Time:	2012-252T00:00	Stop Time:	2012-253T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012253_02

Start Time:	2012-253T00:00	Stop Time:	2012-254T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012254_02

Start Time:	2012-254T00:00	Stop Time:	2012-255T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012255_02

Start Time:	2012-255T00:00	Stop Time:	2012-256T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012256_02

Start Time:	2012-256T00:00	Stop Time:	2012-257T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012257_02

Start Time:	2012-257T00:00	Stop Time:	2012-258T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012258_02

Start Time:	2012-258T00:00	Stop Time:	2012-259T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012259_02

Start Time:	2012-259T00:00	Stop Time:	2012-260T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012260_02

Start Time:	2012-260T00:00	Stop Time:	2012-261T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012261_02

Start Time:	2012-261T00:00	Stop Time:	2012-262T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012262_02

Start Time:	2012-262T00:00	Stop Time:	2012-263T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012263_02

Start Time:	2012-263T00:00	Stop Time:	2012-264T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012264_02

Start Time:	2012-264T00:00	Stop Time:	2012-265T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012265_02

Start Time:	2012-265T00:00	Stop Time:	2012-266T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012266_02

Start Time:	2012-266T00:00	Stop Time:	2012-267T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012267_02

Start Time:	2012-267T00:00	Stop Time:	2012-268T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012268_02

Start Time:	2012-268T00:00	Stop Time:	2012-269T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012269_02

Start Time:	2012-269T00:00	Stop Time:	2012-270T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012270_02

Start Time:	2012-270T00:00	Stop Time:	2012-271T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012271_02

Start Time:	2012-271T00:00	Stop Time:	2012-272T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012272_02

Start Time:	2012-272T00:00	Stop Time:	2012-273T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012273_02

Start Time:	2012-273T00:00	Stop Time:	2012-274T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012274_02

Start Time:	2012-274T00:00	Stop Time:	2012-275T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012275_02

Start Time:	2012-275T00:00	Stop Time:	2012-276T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012276_02

Start Time:	2012-276T00:00	Stop Time:	2012-277T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012277_02

Start Time:	2012-277T00:00	Stop Time:	2012-278T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012278_02

Start Time:	2012-278T00:00	Stop Time:	2012-279T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012279_02

Start Time:	2012-279T00:00	Stop Time:	2012-280T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012280_02

Start Time:	2012-280T00:00	Stop Time:	2012-281T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012281_02

Start Time:	2012-281T00:00	Stop Time:	2012-282T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012282_02

Start Time:	2012-282T00:00	Stop Time:	2012-283T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012283_02

Start Time:	2012-283T00:00	Stop Time:	2012-284T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012284_02

Start Time:	2012-284T00:00	Stop Time:	2012-285T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012285_02

Start Time:	2012-285T00:00	Stop Time:	2012-286T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012286_02

Start Time:	2012-286T00:00	Stop Time:	2012-287T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012287_02

Start Time:	2012-287T00:00	Stop Time:	2012-288T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012288_02

Start Time:	2012-288T00:00	Stop Time:	2012-289T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012289_02

Start Time:	2012-289T00:00	Stop Time:	2012-290T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012290_02

Start Time:	2012-290T00:00	Stop Time:	2012-291T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012291_02

Start Time:	2012-291T00:00	Stop Time:	2012-292T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012292_02

Start Time:	2012-292T00:00	Stop Time:	2012-293T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012293_02

Start Time:	2012-293T00:00	Stop Time:	2012-294T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012303_02

Start Time:	2012-303T00:00	Stop Time:	2012-304T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012304_02

Start Time:	2012-304T00:00	Stop Time:	2012-305T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012305_02

Start Time:	2012-305T00:00	Stop Time:	2012-306T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012306_02

Start Time:	2012-306T00:00	Stop Time:	2012-307T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012307_02

Start Time:	2012-307T00:00	Stop Time:	2012-308T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012308_02

Start Time:	2012-308T00:00	Stop Time:	2012-309T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012309_02

Start Time:	2012-309T00:00	Stop Time:	2012-310T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012310_02

Start Time:	2012-310T00:00	Stop Time:	2012-311T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012311_02

Start Time:	2012-311T00:00	Stop Time:	2012-312T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012312_02

Start Time:	2012-312T00:00	Stop Time:	2012-313T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012313_02

Start Time:	2012-313T00:00	Stop Time:	2012-314T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012314_02

Start Time:	2012-314T00:00	Stop Time:	2012-315T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012315_02

Start Time:	2012-315T00:00	Stop Time:	2012-316T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012316_02

Start Time:	2012-316T00:00	Stop Time:	2012-317T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012317_02

Start Time:	2012-317T00:00	Stop Time:	2012-318T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012318_02

Start Time:	2012-318T00:00	Stop Time:	2012-319T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012319_02

Start Time:	2012-319T00:00	Stop Time:	2012-320T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012320_02

Start Time:	2012-320T00:00	Stop Time:	2012-321T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012321_02

Start Time:	2012-321T00:00	Stop Time:	2012-322T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012322_02

Start Time:	2012-322T00:00	Stop Time:	2012-323T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012323_02

Start Time:	2012-323T00:00	Stop Time:	2012-324T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012324_02

Start Time:	2012-324T00:00	Stop Time:	2012-325T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012325_02

Start Time:	2012-325T00:00	Stop Time:	2012-326T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012326_02

Start Time:	2012-326T00:00	Stop Time:	2012-327T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012327_02

Start Time:	2012-327T00:00	Stop Time:	2012-328T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012328_02

Start Time:	2012-328T00:00	Stop Time:	2012-329T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012329_02

Start Time:	2012-329T00:00	Stop Time:	2012-330T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012330_02

Start Time:	2012-330T00:00	Stop Time:	2012-331T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012331_02

Start Time:	2012-331T00:00	Stop Time:	2012-332T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012332_02

Start Time:	2012-332T00:00	Stop Time:	2012-333T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012333_02

Start Time:	2012-333T00:00	Stop Time:	2012-334T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012334_02

Start Time:	2012-334T00:00	Stop Time:	2012-335T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012335_02

Start Time:	2012-335T00:00	Stop Time:	2012-336T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012336_02

Start Time:	2012-336T00:00	Stop Time:	2012-337T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012337_02

Start Time:	2012-337T00:00	Stop Time:	2012-338T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012338_02

Start Time:	2012-338T00:00	Stop Time:	2012-339T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012339_02

Start Time:	2012-339T00:00	Stop Time:	2012-340T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012340_02

Start Time:	2012-340T00:00	Stop Time:	2012-341T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012341_02

Start Time:	2012-341T00:00	Stop Time:	2012-342T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012342_02

Start Time:	2012-342T00:00	Stop Time:	2012-343T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012343_02

Start Time:	2012-343T00:00	Stop Time:	2012-344T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012344_02

Start Time:	2012-344T00:00	Stop Time:	2012-345T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012345_02

Start Time:	2012-345T00:00	Stop Time:	2012-346T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012346_02

Start Time:	2012-346T00:00	Stop Time:	2012-347T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012347_02

Start Time:	2012-347T00:00	Stop Time:	2012-348T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012348_02

Start Time:	2012-348T00:00	Stop Time:	2012-349T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012349_02

Start Time:	2012-349T00:00	Stop Time:	2012-350T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012350_02

Start Time:	2012-350T00:00	Stop Time:	2012-351T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012351_02

Start Time:	2012-351T00:00	Stop Time:	2012-352T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012352_02

Start Time:	2012-352T00:00	Stop Time:	2012-353T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012353_02

Start Time:	2012-353T00:00	Stop Time:	2012-354T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012354_02

Start Time:	2012-354T00:00	Stop Time:	2012-355T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012355_02

Start Time:	2012-355T00:00	Stop Time:	2012-356T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012356_02

Start Time:	2012-356T00:00	Stop Time:	2012-357T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012357_02

Start Time:	2012-357T00:00	Stop Time:	2012-358T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012358_02

Start Time:	2012-358T00:00	Stop Time:	2012-359T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012359_02

Start Time:	2012-359T00:00	Stop Time:	2012-360T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012360_02

Start Time:	2012-360T00:00	Stop Time:	2012-361T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012361_02

Start Time:	2012-361T00:00	Stop Time:	2012-362T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012362_02

Start Time:	2012-362T00:00	Stop Time:	2012-363T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012363_02

Start Time:	2012-363T00:00	Stop Time:	2012-364T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012364_02

Start Time:	2012-364T00:00	Stop Time:	2012-365T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012365_02

Start Time:	2012-365T00:00	Stop Time:	2012-366T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1MIN_2012366_02

Start Time:	2012-366T00:00	Stop Time:	2013-001T00:00
The data columns contain 1 minute averages of LEMMS PHA data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in