PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LACCFULL0/ 2017 /

LACCFULL0_2017001_01

Start Time:	2017-001T00:00:01.875	Stop Time:	2017-001T23:59:56.697
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017002_01

Start Time:	2017-002T00:00:02.322	Stop Time:	2017-002T23:59:58.612
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017003_01

Start Time:	2017-003T00:00:06.581	Stop Time:	2017-003T23:59:55.841
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017004_01

Start Time:	2017-004T00:00:02.403	Stop Time:	2017-004T23:59:54.916
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017005_01

Start Time:	2017-005T00:00:02.881	Stop Time:	2017-005T23:59:56.609
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017006_01

Start Time:	2017-006T00:00:02.234	Stop Time:	2017-006T23:59:57.056
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017007_01

Start Time:	2017-007T00:00:02.681	Stop Time:	2017-007T23:59:57.503
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017008_01

Start Time:	2017-008T00:00:03.128	Stop Time:	2017-008T23:59:59.575
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017009_01

Start Time:	2017-009T00:00:05.200	Stop Time:	2017-009T23:59:58.147
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017010_01

Start Time:	2017-010T00:00:01.897	Stop Time:	2017-010T23:59:56.594
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017011_01

Start Time:	2017-011T00:00:00.344	Stop Time:	2017-011T23:59:57.791
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017012_01

Start Time:	2017-012T00:00:01.541	Stop Time:	2017-012T23:59:55.492
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017013_01

Start Time:	2017-013T00:00:01.113	Stop Time:	2017-013T23:59:57.810
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017014_01

Start Time:	2017-014T00:00:03.435	Stop Time:	2017-014T23:59:57.256
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017015_01

Start Time:	2017-015T00:00:02.881	Stop Time:	2017-015T23:59:52.785
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017016_01

Start Time:	2017-016T00:00:00.781	Stop Time:	2017-016T23:59:57.275
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017017_01

Start Time:	2017-017T00:00:01.025	Stop Time:	2017-017T23:59:57.726
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017018_01

Start Time:	2017-018T00:00:01.472	Stop Time:	2017-018T23:59:52.275
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017019_01

Start Time:	2017-019T00:00:00.294	Stop Time:	2017-019T23:59:56.694
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017020_01

Start Time:	2017-020T00:00:04.702	Stop Time:	2017-020T23:59:57.562
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017021_01

Start Time:	2017-021T00:00:03.187	Stop Time:	2017-021T23:59:58.009
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017022_01

Start Time:	2017-022T00:00:03.634	Stop Time:	2017-022T23:59:55.960
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017023_01

Start Time:	2017-023T00:00:01.581	Stop Time:	2017-023T23:59:56.653
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017024_01

Start Time:	2017-024T00:00:00.403	Stop Time:	2017-024T23:59:55.123
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017025_01

Start Time:	2017-025T00:00:03.154	Stop Time:	2017-025T23:59:59.796
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017026_01

Start Time:	2017-026T00:00:03.546	Stop Time:	2017-026T23:59:59.310
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017027_01

Start Time:	2017-027T00:00:07.747	Stop Time:	2017-027T23:59:52.046
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017028_01

Start Time:	2017-028T00:00:00.026	Stop Time:	2017-028T23:59:52.375
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017029_01

Start Time:	2017-029T00:00:00.328	Stop Time:	2017-029T23:59:52.490
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017030_01

Start Time:	2017-030T00:00:00.525	Stop Time:	2017-030T23:59:57.656
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017031_01

Start Time:	2017-031T00:00:02.343	Stop Time:	2017-031T23:59:56.021
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017032_01

Start Time:	2017-032T00:00:04.040	Stop Time:	2017-032T23:59:56.550
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017033_01

Start Time:	2017-033T00:00:02.175	Stop Time:	2017-033T23:59:55.997
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017034_01

Start Time:	2017-034T00:00:01.621	Stop Time:	2017-034T23:59:56.443
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017035_01

Start Time:	2017-035T00:00:02.068	Stop Time:	2017-035T23:59:56.890
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017036_01

Start Time:	2017-036T00:00:02.515	Stop Time:	2017-036T23:59:56.337
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017037_01

Start Time:	2017-037T00:00:01.962	Stop Time:	2017-037T23:59:54.347
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017038_01

Start Time:	2017-038T00:00:02.315	Stop Time:	2017-038T23:59:57.168
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017039_01

Start Time:	2017-039T00:00:03.731	Stop Time:	2017-039T23:59:56.740
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017040_01

Start Time:	2017-040T00:00:03.303	Stop Time:	2017-040T23:59:59.562
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017041_01

Start Time:	2017-041T00:00:07.531	Stop Time:	2017-041T23:59:57.697
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017042_01

Start Time:	2017-042T00:00:03.322	Stop Time:	2017-042T23:59:58.144
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017043_01

Start Time:	2017-043T00:00:03.768	Stop Time:	2017-043T23:59:58.590
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017044_01

Start Time:	2017-044T00:00:04.215	Stop Time:	2017-044T23:59:59.037
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017045_01

Start Time:	2017-045T00:00:04.662	Stop Time:	2017-045T23:59:59.484
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017046_01

Start Time:	2017-046T00:00:03.234	Stop Time:	2017-046T23:59:58.431
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017047_01

Start Time:	2017-047T00:00:02.181	Stop Time:	2017-047T23:59:52.433
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017048_01

Start Time:	2017-048T00:00:00.468	Stop Time:	2017-048T23:59:54.950
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017049_01

Start Time:	2017-049T00:00:00.579	Stop Time:	2017-049T23:59:57.272
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017050_01

Start Time:	2017-050T00:00:02.897	Stop Time:	2017-050T23:59:57.719
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017051_01

Start Time:	2017-051T00:00:03.344	Stop Time:	2017-051T23:59:59.978
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017052_01

Start Time:	2017-052T00:00:06.540	Stop Time:	2017-052T23:59:59.987
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017053_01

Start Time:	2017-053T00:00:06.550	Stop Time:	2017-053T23:59:58.434
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017054_01

Start Time:	2017-054T00:00:04.997	Stop Time:	2017-054T23:59:57.733
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017055_01

Start Time:	2017-055T00:00:05.764	Stop Time:	2017-055T23:59:57.203
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017056_01

Start Time:	2017-056T00:00:02.828	Stop Time:	2017-056T23:59:58.650
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017057_01

Start Time:	2017-057T00:00:02.400	Stop Time:	2017-057T23:59:56.972
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017058_01

Start Time:	2017-058T00:00:02.601	Stop Time:	2017-058T23:59:57.419
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017059_01

Start Time:	2017-059T00:00:03.048	Stop Time:	2017-059T23:59:59.741
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017060_01

Start Time:	2017-060T00:00:04.428	Stop Time:	2017-060T23:59:59.312
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017061_01

Start Time:	2017-061T00:00:04.941	Stop Time:	2017-061T23:59:57.884
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017062_01

Start Time:	2017-062T00:00:01.634	Stop Time:	2017-062T23:59:59.331
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017063_01

Start Time:	2017-063T00:00:04.956	Stop Time:	2017-063T23:59:59.153
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017064_01

Start Time:	2017-064T00:00:04.778	Stop Time:	2017-064T23:59:59.600
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017065_01

Start Time:	2017-065T00:00:05.225	Stop Time:	2017-065T23:59:57.016
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017066_01

Start Time:	2017-066T00:00:04.984	Stop Time:	2017-066T23:59:55.623
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017067_01

Start Time:	2017-067T00:00:01.244	Stop Time:	2017-067T23:59:56.878
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017068_01

Start Time:	2017-068T00:00:04.847	Stop Time:	2017-068T23:59:56.512
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017069_01

Start Time:	2017-069T00:00:00.262	Stop Time:	2017-069T23:59:58.833
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017070_01

Start Time:	2017-070T00:00:04.458	Stop Time:	2017-070T23:59:56.655
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017071_01

Start Time:	2017-071T00:00:00.405	Stop Time:	2017-071T23:59:59.727
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017072_01

Start Time:	2017-072T00:00:05.352	Stop Time:	2017-072T23:59:54.424
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017073_01

Start Time:	2017-073T00:00:00.049	Stop Time:	2017-073T23:59:57.746
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017074_01

Start Time:	2017-074T00:00:01.496	Stop Time:	2017-074T23:59:56.818
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017075_01

Start Time:	2017-075T00:00:01.505	Stop Time:	2017-075T23:59:55.390
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017076_01

Start Time:	2017-076T00:00:01.015	Stop Time:	2017-076T23:59:57.837
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017077_01

Start Time:	2017-077T00:00:03.462	Stop Time:	2017-077T23:59:58.346
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017078_01

Start Time:	2017-078T00:00:04.908	Stop Time:	2017-078T23:59:54.605
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017079_01

Start Time:	2017-079T00:00:01.168	Stop Time:	2017-079T23:59:57.927
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017080_01

Start Time:	2017-080T00:00:04.490	Stop Time:	2017-080T23:59:57.374
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017081_01

Start Time:	2017-081T00:00:01.124	Stop Time:	2017-081T23:59:59.325
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017082_01

Start Time:	2017-082T00:00:04.946	Stop Time:	2017-082T23:59:58.768
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017083_01

Start Time:	2017-083T00:00:02.518	Stop Time:	2017-083T23:59:59.715
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017084_01

Start Time:	2017-084T00:00:05.340	Stop Time:	2017-084T23:59:57.162
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017085_01

Start Time:	2017-085T00:00:00.912	Stop Time:	2017-085T23:59:59.108
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017086_01

Start Time:	2017-086T00:00:02.858	Stop Time:	2017-086T23:59:59.555
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017087_01

Start Time:	2017-087T00:00:05.180	Stop Time:	2017-087T23:59:56.752
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017088_01

Start Time:	2017-088T00:00:00.502	Stop Time:	2017-088T23:59:58.199
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017089_01

Start Time:	2017-089T00:00:01.949	Stop Time:	2017-089T23:59:58.896
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017090_01

Start Time:	2017-090T00:00:02.646	Stop Time:	2017-090T23:59:55.468
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017091_01

Start Time:	2017-091T00:00:01.093	Stop Time:	2017-091T23:59:57.915
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017092_01

Start Time:	2017-092T00:00:03.540	Stop Time:	2017-092T23:59:58.362
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017093_01

Start Time:	2017-093T00:00:03.986	Stop Time:	2017-093T23:59:58.433
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017094_01

Start Time:	2017-094T00:00:04.058	Stop Time:	2017-094T23:59:55.005
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017095_01

Start Time:	2017-095T00:00:00.630	Stop Time:	2017-095T23:59:55.465
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017096_01

Start Time:	2017-096T00:00:02.027	Stop Time:	2017-096T23:59:55.774
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017097_01

Start Time:	2017-097T00:00:02.336	Stop Time:	2017-097T23:59:59.358
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017098_01

Start Time:	2017-098T00:00:07.135	Stop Time:	2017-098T23:59:58.418
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017099_01

Start Time:	2017-099T00:00:02.168	Stop Time:	2017-099T23:59:57.865
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017100_01

Start Time:	2017-100T00:00:01.615	Stop Time:	2017-100T23:59:59.311
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017101_01

Start Time:	2017-101T00:00:04.936	Stop Time:	2017-101T23:59:59.758
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017102_01

Start Time:	2017-102T00:00:05.383	Stop Time:	2017-102T23:59:56.455
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017103_01

Start Time:	2017-103T00:00:00.205	Stop Time:	2017-103T23:59:56.902
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017104_01

Start Time:	2017-104T00:00:00.652	Stop Time:	2017-104T23:59:55.918
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017105_01

Start Time:	2017-105T00:00:02.480	Stop Time:	2017-105T23:59:56.427
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017106_01

Start Time:	2017-106T00:00:02.993	Stop Time:	2017-106T23:59:57.811
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017107_01

Start Time:	2017-107T00:00:03.436	Stop Time:	2017-107T23:59:58.257
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017108_01

Start Time:	2017-108T00:00:03.882	Stop Time:	2017-108T23:59:57.704
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017109_01

Start Time:	2017-109T00:00:03.329	Stop Time:	2017-109T23:59:58.650
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017110_01

Start Time:	2017-110T00:00:03.338	Stop Time:	2017-110T23:59:58.972
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017111_01

Start Time:	2017-111T00:00:02.722	Stop Time:	2017-111T23:59:59.043
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017112_01

Start Time:	2017-112T00:00:04.668	Stop Time:	2017-112T23:59:59.490
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017113_01

Start Time:	2017-113T00:00:05.115	Stop Time:	2017-113T23:59:56.936
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017114_01

Start Time:	2017-114T00:00:02.561	Stop Time:	2017-114T23:59:57.383
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017115_01

Start Time:	2017-115T00:00:03.008	Stop Time:	2017-115T23:59:59.704
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017116_01

Start Time:	2017-116T00:00:03.454	Stop Time:	2017-116T23:59:57.401
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017117_01

Start Time:	2017-117T00:00:01.151	Stop Time:	2017-117T23:59:59.597
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017118_01

Start Time:	2017-118T00:00:03.347	Stop Time:	2017-118T23:59:58.794
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017119_01

Start Time:	2017-119T00:00:02.543	Stop Time:	2017-119T23:59:57.245
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017120_01

Start Time:	2017-120T00:00:02.866	Stop Time:	2017-120T23:59:57.687
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017121_01

Start Time:	2017-121T00:00:01.437	Stop Time:	2017-121T23:59:59.138
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017122_01

Start Time:	2017-122T00:00:04.759	Stop Time:	2017-122T23:59:55.830
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017123_01

Start Time:	2017-123T00:00:00.518	Stop Time:	2017-123T23:59:58.777
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017124_01

Start Time:	2017-124T00:00:02.527	Stop Time:	2017-124T23:59:58.973
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017125_01

Start Time:	2017-125T00:00:02.723	Stop Time:	2017-125T23:59:57.420
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017126_01

Start Time:	2017-126T00:00:01.170	Stop Time:	2017-126T23:59:58.866
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017127_01

Start Time:	2017-127T00:00:02.616	Stop Time:	2017-127T23:59:57.438
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017128_01

Start Time:	2017-128T00:00:03.063	Stop Time:	2017-128T23:59:58.447
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017129_01

Start Time:	2017-129T00:00:03.134	Stop Time:	2017-129T23:59:56.706
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017130_01

Start Time:	2017-130T00:00:00.456	Stop Time:	2017-130T23:59:57.027
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017131_01

Start Time:	2017-131T00:00:02.652	Stop Time:	2017-131T23:59:56.474
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017132_01

Start Time:	2017-132T00:00:02.098	Stop Time:	2017-132T23:59:54.795
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017133_01

Start Time:	2017-133T00:00:00.420	Stop Time:	2017-133T23:59:58.991
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017134_01

Start Time:	2017-134T00:00:02.741	Stop Time:	2017-134T23:59:56.688
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017135_01

Start Time:	2017-135T00:00:00.438	Stop Time:	2017-135T23:59:56.197
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017136_01

Start Time:	2017-136T00:00:00.884	Stop Time:	2017-136T23:59:57.581
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017137_01

Start Time:	2017-137T00:00:01.331	Stop Time:	2017-137T23:59:59.027
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017138_01

Start Time:	2017-138T00:00:02.777	Stop Time:	2017-138T23:59:57.474
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017139_01

Start Time:	2017-139T00:00:01.224	Stop Time:	2017-139T23:59:56.420
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017140_01

Start Time:	2017-140T00:00:00.170	Stop Time:	2017-140T23:59:56.867
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017141_01

Start Time:	2017-141T00:00:00.617	Stop Time:	2017-141T23:59:55.501
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017142_01

Start Time:	2017-142T00:00:00.188	Stop Time:	2017-142T23:59:59.759
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017143_01

Start Time:	2017-143T00:00:03.509	Stop Time:	2017-143T23:59:59.331
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017144_01

Start Time:	2017-144T00:00:04.956	Stop Time:	2017-144T23:59:54.141
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017145_01

Start Time:	2017-145T00:00:02.094	Stop Time:	2017-145T23:59:58.598
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017146_01

Start Time:	2017-146T00:00:02.348	Stop Time:	2017-146T23:59:59.043
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017147_01

Start Time:	2017-147T00:00:02.792	Stop Time:	2017-147T23:59:58.550
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017148_01

Start Time:	2017-148T00:00:06.519	Stop Time:	2017-148T23:59:58.995
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017149_01

Start Time:	2017-149T00:00:06.963	Stop Time:	2017-149T23:59:56.377
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017150_01

Start Time:	2017-150T00:00:00.127	Stop Time:	2017-150T23:59:58.947
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017151_01

Start Time:	2017-151T00:00:04.572	Stop Time:	2017-151T23:59:57.767
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017152_01

Start Time:	2017-152T00:00:03.392	Stop Time:	2017-152T23:59:57.212
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017153_01

Start Time:	2017-153T00:00:00.965	Stop Time:	2017-153T23:59:54.781
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017154_01

Start Time:	2017-154T00:00:00.410	Stop Time:	2017-154T23:59:55.226
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017155_01

Start Time:	2017-155T00:00:00.851	Stop Time:	2017-155T23:59:56.171
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017156_01

Start Time:	2017-156T00:00:02.733	Stop Time:	2017-156T23:59:58.866
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017157_01

Start Time:	2017-157T00:00:05.428	Stop Time:	2017-157T23:59:59.873
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017158_01

Start Time:	2017-158T00:00:06.436	Stop Time:	2017-158T23:59:59.502
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017159_01

Start Time:	2017-159T00:00:07.486	Stop Time:	2017-159T23:59:57.325
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017160_01

Start Time:	2017-160T00:00:02.950	Stop Time:	2017-160T23:59:57.770
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017161_01

Start Time:	2017-161T00:00:03.395	Stop Time:	2017-161T23:59:58.215
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017162_01

Start Time:	2017-162T00:00:03.840	Stop Time:	2017-162T23:59:56.910
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017163_01

Start Time:	2017-163T00:00:00.660	Stop Time:	2017-163T23:59:58.355
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017164_01

Start Time:	2017-164T00:00:02.105	Stop Time:	2017-164T23:59:57.550
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017165_01

Start Time:	2017-165T00:00:01.299	Stop Time:	2017-165T23:59:57.748
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017166_01

Start Time:	2017-166T00:00:03.369	Stop Time:	2017-166T23:59:54.439
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017167_01

Start Time:	2017-167T00:00:00.064	Stop Time:	2017-167T23:59:58.760
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017168_01

Start Time:	2017-168T00:00:01.572	Stop Time:	2017-168T23:59:56.580
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017169_01

Start Time:	2017-169T00:00:00.330	Stop Time:	2017-169T23:59:56.150
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017170_01

Start Time:	2017-170T00:00:01.775	Stop Time:	2017-170T23:59:58.969
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017171_01

Start Time:	2017-171T00:00:02.719	Stop Time:	2017-171T23:59:57.164
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017172_01

Start Time:	2017-172T00:00:02.789	Stop Time:	2017-172T23:59:57.609
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017173_01

Start Time:	2017-173T00:00:03.234	Stop Time:	2017-173T23:59:58.054
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017174_01

Start Time:	2017-174T00:00:03.679	Stop Time:	2017-174T23:59:58.499
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017175_01

Start Time:	2017-175T00:00:04.124	Stop Time:	2017-175T23:59:54.569
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017176_01

Start Time:	2017-176T00:00:00.194	Stop Time:	2017-176T23:59:58.021
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017177_01

Start Time:	2017-177T00:00:05.978	Stop Time:	2017-177T23:59:59.087
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017178_01

Start Time:	2017-178T00:00:02.833	Stop Time:	2017-178T23:59:59.528
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017179_01

Start Time:	2017-179T00:00:03.278	Stop Time:	2017-179T23:59:57.223
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017180_01

Start Time:	2017-180T00:00:00.973	Stop Time:	2017-180T23:59:57.668
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017181_01

Start Time:	2017-181T00:00:01.418	Stop Time:	2017-181T23:59:59.613
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017182_01

Start Time:	2017-182T00:00:03.363	Stop Time:	2017-182T23:59:55.557
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017183_01

Start Time:	2017-183T00:00:01.182	Stop Time:	2017-183T23:59:59.752
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017184_01

Start Time:	2017-184T00:00:03.502	Stop Time:	2017-184T23:59:59.388
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017185_01

Start Time:	2017-185T00:00:07.201	Stop Time:	2017-185T23:59:56.646
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017186_01

Start Time:	2017-186T00:00:03.204	Stop Time:	2017-186T23:59:54.274
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017187_01

Start Time:	2017-187T00:00:00.837	Stop Time:	2017-187T23:59:54.344
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017188_01

Start Time:	2017-188T00:00:00.907	Stop Time:	2017-188T23:59:56.476
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017189_01

Start Time:	2017-189T00:00:02.101	Stop Time:	2017-189T23:59:57.671
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017190_01

Start Time:	2017-190T00:00:03.296	Stop Time:	2017-190T23:59:56.115
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017191_01

Start Time:	2017-191T00:00:01.740	Stop Time:	2017-191T23:59:55.089
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017192_01

Start Time:	2017-192T00:00:03.057	Stop Time:	2017-192T23:59:52.718
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017193_01

Start Time:	2017-193T00:00:00.687	Stop Time:	2017-193T23:59:56.941
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017194_01

Start Time:	2017-194T00:00:00.691	Stop Time:	2017-194T23:59:52.883
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017195_01

Start Time:	2017-195T00:00:00.903	Stop Time:	2017-195T23:59:56.575
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017196_01

Start Time:	2017-196T00:00:00.325	Stop Time:	2017-196T23:59:57.767
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017197_01

Start Time:	2017-197T00:00:01.517	Stop Time:	2017-197T23:59:59.834
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017198_01

Start Time:	2017-198T00:00:05.459	Stop Time:	2017-198T23:59:59.026
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017199_01

Start Time:	2017-199T00:00:04.651	Stop Time:	2017-199T23:59:59.019
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017200_01

Start Time:	2017-200T00:00:05.312	Stop Time:	2017-200T23:59:58.598
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017201_01

Start Time:	2017-201T00:00:05.160	Stop Time:	2017-201T23:59:58.731
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017202_01

Start Time:	2017-202T00:00:05.290	Stop Time:	2017-202T23:59:55.482
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017203_01

Start Time:	2017-203T00:00:02.044	Stop Time:	2017-203T23:59:55.361
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017204_01

Start Time:	2017-204T00:00:00.986	Stop Time:	2017-204T23:59:58.179
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017205_01

Start Time:	2017-205T00:00:03.804	Stop Time:	2017-205T23:59:58.621
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017206_01

Start Time:	2017-206T00:00:04.246	Stop Time:	2017-206T23:59:59.063
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017207_01

Start Time:	2017-207T00:00:03.751	Stop Time:	2017-207T23:59:55.005
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017208_01

Start Time:	2017-208T00:00:00.630	Stop Time:	2017-208T23:59:57.572
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017209_01

Start Time:	2017-209T00:00:03.197	Stop Time:	2017-209T23:59:57.139
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017210_01

Start Time:	2017-210T00:00:02.764	Stop Time:	2017-210T23:59:59.206
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017211_01

Start Time:	2017-211T00:00:04.831	Stop Time:	2017-211T23:59:59.648
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017212_01

Start Time:	2017-212T00:00:03.398	Stop Time:	2017-212T23:59:56.340
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017213_01

Start Time:	2017-213T00:00:00.090	Stop Time:	2017-213T23:59:55.505
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017214_01

Start Time:	2017-214T00:00:03.552	Stop Time:	2017-214T22:01:47.895
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017215_01

Start Time:	2017-215T03:36:47.394	Stop Time:	2017-215T23:59:59.166
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017216_01

Start Time:	2017-216T00:00:02.920	Stop Time:	2017-216T23:59:58.608
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017217_01

Start Time:	2017-217T00:00:02.362	Stop Time:	2017-217T23:59:56.800
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017218_01

Start Time:	2017-218T00:00:00.550	Stop Time:	2017-218T23:59:55.367
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017219_01

Start Time:	2017-219T00:00:00.992	Stop Time:	2017-219T23:59:58.684
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017220_01

Start Time:	2017-220T00:00:02.434	Stop Time:	2017-220T23:59:58.251
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017221_01

Start Time:	2017-221T00:00:03.876	Stop Time:	2017-221T23:59:57.693
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017222_01

Start Time:	2017-222T00:00:03.318	Stop Time:	2017-222T23:59:58.260
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017223_01

Start Time:	2017-223T00:00:03.885	Stop Time:	2017-223T23:59:58.702
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017224_01

Start Time:	2017-224T00:00:04.327	Stop Time:	2017-224T23:59:55.394
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017225_01

Start Time:	2017-225T00:00:01.957	Stop Time:	2017-225T23:59:56.836
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017226_01

Start Time:	2017-226T00:00:02.461	Stop Time:	2017-226T23:59:55.466
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017227_01

Start Time:	2017-227T00:00:02.028	Stop Time:	2017-227T23:59:57.970
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017228_01

Start Time:	2017-228T00:00:01.720	Stop Time:	2017-228T23:59:56.850
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017229_01

Start Time:	2017-229T00:00:01.537	Stop Time:	2017-229T23:59:59.354
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017230_01

Start Time:	2017-230T00:00:03.104	Stop Time:	2017-230T23:59:57.546
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017231_01

Start Time:	2017-231T00:00:01.296	Stop Time:	2017-231T23:59:59.988
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017232_01

Start Time:	2017-232T00:00:03.738	Stop Time:	2017-232T23:59:57.680
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017233_01

Start Time:	2017-233T00:00:01.430	Stop Time:	2017-233T23:59:58.622
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017234_01

Start Time:	2017-234T00:00:02.372	Stop Time:	2017-234T23:59:58.318
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017235_01

Start Time:	2017-235T00:00:03.939	Stop Time:	2017-235T23:59:52.702
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017236_01

Start Time:	2017-236T00:00:00.643	Stop Time:	2017-236T23:59:59.948
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017237_01

Start Time:	2017-237T00:00:03.698	Stop Time:	2017-237T23:59:55.234
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017238_01

Start Time:	2017-238T00:00:03.203	Stop Time:	2017-238T23:59:55.707
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017239_01

Start Time:	2017-239T00:00:00.395	Stop Time:	2017-239T23:59:52.528
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017240_01

Start Time:	2017-240T00:00:00.493	Stop Time:	2017-240T23:59:59.591
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017241_01

Start Time:	2017-241T00:00:07.560	Stop Time:	2017-241T23:59:55.846
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017242_01

Start Time:	2017-242T00:00:02.412	Stop Time:	2017-242T23:59:54.163
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017243_01

Start Time:	2017-243T00:00:00.725	Stop Time:	2017-243T23:59:56.199
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017244_01

Start Time:	2017-244T00:00:04.167	Stop Time:	2017-244T23:59:56.172
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017245_01

Start Time:	2017-245T00:00:02.738	Stop Time:	2017-245T23:59:59.489
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017246_01

Start Time:	2017-246T00:00:06.051	Stop Time:	2017-246T23:59:59.494
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017247_01

Start Time:	2017-247T00:00:05.118	Stop Time:	2017-247T23:59:56.186
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017248_01

Start Time:	2017-248T00:00:01.811	Stop Time:	2017-248T23:59:58.628
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017249_01

Start Time:	2017-249T00:00:04.253	Stop Time:	2017-249T23:59:56.695
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017250_01

Start Time:	2017-250T00:00:00.445	Stop Time:	2017-250T23:59:59.012
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017251_01

Start Time:	2017-251T00:00:04.637	Stop Time:	2017-251T23:59:58.579
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017252_01

Start Time:	2017-252T00:00:01.391	Stop Time:	2017-252T23:59:59.147
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017253_01

Start Time:	2017-253T00:00:04.772	Stop Time:	2017-253T23:59:57.229
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017254_01

Start Time:	2017-254T00:00:05.303	Stop Time:	2017-254T23:59:55.781
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017255_01

Start Time:	2017-255T00:00:01.406	Stop Time:	2017-255T23:59:55.223
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017256_01

Start Time:	2017-256T00:00:00.848	Stop Time:	2017-256T23:59:58.790
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017257_01

Start Time:	2017-257T00:00:02.540	Stop Time:	2017-257T23:59:56.482
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2017258_01

Start Time:	2017-258T00:00:00.232	Stop Time:	2017-258T10:34:09.423
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in