PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LACCFULL0/ 2012 /

LACCFULL0_2012001_01

Start Time:	2012-001T00:00:05.457	Stop Time:	2012-001T23:59:54.660
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012002_01

Start Time:	2012-002T00:00:00.285	Stop Time:	2012-002T23:59:55.114
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012003_01

Start Time:	2012-003T00:00:00.739	Stop Time:	2012-003T23:59:57.442
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012004_01

Start Time:	2012-004T00:00:01.192	Stop Time:	2012-004T23:59:57.895
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012005_01

Start Time:	2012-005T00:00:03.520	Stop Time:	2012-005T23:59:57.724
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012006_01

Start Time:	2012-006T00:00:03.353	Stop Time:	2012-006T23:59:59.833
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012007_01

Start Time:	2012-007T00:00:10.849	Stop Time:	2012-007T23:59:55.302
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012008_01

Start Time:	2012-008T00:00:06.318	Stop Time:	2012-008T23:59:50.803
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012009_01

Start Time:	2012-009T00:00:01.818	Stop Time:	2012-009T23:59:52.209
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012010_01

Start Time:	2012-010T00:00:03.225	Stop Time:	2012-010T23:59:59.725
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012011_01

Start Time:	2012-011T00:00:10.741	Stop Time:	2012-011T23:59:57.194
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012012_01

Start Time:	2012-012T00:00:02.819	Stop Time:	2012-012T23:59:58.022
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012013_01

Start Time:	2012-013T00:00:03.647	Stop Time:	2012-013T23:59:55.726
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012014_01

Start Time:	2012-014T00:00:01.351	Stop Time:	2012-014T23:59:56.679
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012015_01

Start Time:	2012-015T00:00:02.304	Stop Time:	2012-015T23:59:58.632
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012016_01

Start Time:	2012-016T00:00:04.257	Stop Time:	2012-016T23:59:58.211
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012017_01

Start Time:	2012-017T00:00:03.836	Stop Time:	2012-017T23:59:58.257
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012018_01

Start Time:	2012-018T00:00:05.757	Stop Time:	2012-018T23:59:56.210
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012019_01

Start Time:	2012-019T00:00:03.710	Stop Time:	2012-019T23:59:57.662
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012020_01

Start Time:	2012-020T00:00:05.162	Stop Time:	2012-020T23:59:56.115
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012021_01

Start Time:	2012-021T00:00:03.615	Stop Time:	2012-021T23:59:57.566
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012022_01

Start Time:	2012-022T00:00:05.066	Stop Time:	2012-022T23:59:59.019
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012023_01

Start Time:	2012-023T00:00:06.519	Stop Time:	2012-023T23:59:52.972
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012024_01

Start Time:	2012-024T00:00:00.472	Stop Time:	2012-024T23:59:58.174
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012025_01

Start Time:	2012-025T00:00:03.799	Stop Time:	2012-025T23:59:57.627
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012026_01

Start Time:	2012-026T00:00:03.252	Stop Time:	2012-026T23:59:58.079
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012027_01

Start Time:	2012-027T00:00:03.704	Stop Time:	2012-027T22:58:10.680
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012028_01

Start Time:	2012-028T05:42:47.156	Stop Time:	2012-028T09:58:43.304
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012029_01

Start Time:	2012-029T04:34:48.634	Stop Time:	2012-029T23:59:59.437
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012030_01

Start Time:	2012-030T00:00:03.187	Stop Time:	2012-030T23:59:57.140
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012031_01

Start Time:	2012-031T00:00:02.765	Stop Time:	2012-031T23:59:55.217
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012032_01

Start Time:	2012-032T00:00:00.842	Stop Time:	2012-032T23:59:58.045
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012033_01

Start Time:	2012-033T00:00:03.670	Stop Time:	2012-033T23:59:53.646
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012034_01

Start Time:	2012-034T00:00:01.603	Stop Time:	2012-034T23:59:58.075
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012035_01

Start Time:	2012-035T00:00:03.700	Stop Time:	2012-035T23:59:56.278
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012036_01

Start Time:	2012-036T00:00:01.903	Stop Time:	2012-036T23:59:58.605
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012037_01

Start Time:	2012-037T00:00:04.230	Stop Time:	2012-037T23:59:59.058
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012038_01

Start Time:	2012-038T00:00:04.683	Stop Time:	2012-038T23:59:59.510
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012039_01

Start Time:	2012-039T00:00:05.135	Stop Time:	2012-039T23:59:56.338
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012040_01

Start Time:	2012-040T00:00:01.963	Stop Time:	2012-040T23:59:56.791
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012041_01

Start Time:	2012-041T00:00:02.416	Stop Time:	2012-041T23:59:57.243
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012042_01

Start Time:	2012-042T00:00:02.868	Stop Time:	2012-042T23:59:56.696
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012043_01

Start Time:	2012-043T00:00:02.321	Stop Time:	2012-043T23:59:57.148
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012044_01

Start Time:	2012-044T00:00:02.773	Stop Time:	2012-044T23:59:57.601
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012045_01

Start Time:	2012-045T00:00:03.226	Stop Time:	2012-045T23:59:57.054
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012046_01

Start Time:	2012-046T00:00:02.679	Stop Time:	2012-046T23:59:57.506
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012047_01

Start Time:	2012-047T00:00:03.131	Stop Time:	2012-047T23:59:57.959
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012048_01

Start Time:	2012-048T00:00:03.584	Stop Time:	2012-048T23:59:57.411
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012049_01

Start Time:	2012-049T00:00:03.036	Stop Time:	2012-049T23:59:56.989
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012050_01

Start Time:	2012-050T00:00:02.614	Stop Time:	2012-050T23:59:57.442
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012051_01

Start Time:	2012-051T00:00:03.066	Stop Time:	2012-051T23:59:57.894
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012052_01

Start Time:	2012-052T00:00:01.644	Stop Time:	2012-052T23:59:58.847
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012053_01

Start Time:	2012-053T00:00:04.472	Stop Time:	2012-053T23:59:55.053
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012054_01

Start Time:	2012-054T00:00:03.034	Stop Time:	2012-054T23:59:59.525
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012055_01

Start Time:	2012-055T00:00:07.545	Stop Time:	2012-055T23:59:54.829
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012056_01

Start Time:	2012-056T00:00:00.454	Stop Time:	2012-056T23:59:54.356
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012057_01

Start Time:	2012-057T00:00:02.348	Stop Time:	2012-057T23:59:54.485
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012058_01

Start Time:	2012-058T00:00:00.110	Stop Time:	2012-058T23:59:55.316
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012059_01

Start Time:	2012-059T00:00:00.937	Stop Time:	2012-059T23:59:55.769
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012060_01

Start Time:	2012-060T00:00:01.390	Stop Time:	2012-060T23:59:54.592
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012061_01

Start Time:	2012-061T00:00:00.221	Stop Time:	2012-061T23:59:55.045
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012062_01

Start Time:	2012-062T00:00:00.674	Stop Time:	2012-062T23:59:58.747
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012063_01

Start Time:	2012-063T00:00:04.372	Stop Time:	2012-063T23:59:59.200
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012064_01

Start Time:	2012-064T00:00:04.825	Stop Time:	2012-064T23:59:54.903
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012065_01

Start Time:	2012-065T00:00:00.528	Stop Time:	2012-065T23:59:55.355
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012066_01

Start Time:	2012-066T00:00:00.980	Stop Time:	2012-066T23:59:55.683
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012067_01

Start Time:	2012-067T00:00:01.308	Stop Time:	2012-067T23:59:59.885
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012068_01

Start Time:	2012-068T00:00:05.510	Stop Time:	2012-068T23:59:54.587
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012069_01

Start Time:	2012-069T00:00:00.212	Stop Time:	2012-069T23:59:55.040
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012070_01

Start Time:	2012-070T00:00:00.665	Stop Time:	2012-070T23:59:55.492
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012071_01

Start Time:	2012-071T00:00:01.117	Stop Time:	2012-071T23:59:54.945
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012072_01

Start Time:	2012-072T00:00:00.570	Stop Time:	2012-072T23:59:55.397
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012073_01

Start Time:	2012-073T00:00:01.022	Stop Time:	2012-073T23:59:55.850
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012074_01

Start Time:	2012-074T00:00:01.475	Stop Time:	2012-074T23:59:55.302
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012075_01

Start Time:	2012-075T00:00:00.927	Stop Time:	2012-075T23:59:55.755
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012076_01

Start Time:	2012-076T00:00:01.380	Stop Time:	2012-076T23:59:56.208
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012077_01

Start Time:	2012-077T00:00:01.833	Stop Time:	2012-077T23:59:55.660
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012078_01

Start Time:	2012-078T00:00:01.285	Stop Time:	2012-078T23:59:55.113
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012079_01

Start Time:	2012-079T00:00:00.738	Stop Time:	2012-079T23:59:56.565
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012080_01

Start Time:	2012-080T00:00:02.190	Stop Time:	2012-080T23:59:56.018
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012081_01

Start Time:	2012-081T00:00:01.643	Stop Time:	2012-081T23:59:56.470
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012082_01

Start Time:	2012-082T00:00:02.095	Stop Time:	2012-082T23:59:55.673
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012083_01

Start Time:	2012-083T00:00:01.298	Stop Time:	2012-083T23:59:55.126
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012084_01

Start Time:	2012-084T00:00:00.751	Stop Time:	2012-084T23:59:58.328
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012085_01

Start Time:	2012-085T00:00:03.953	Stop Time:	2012-085T23:59:56.906
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012086_01

Start Time:	2012-086T00:00:02.535	Stop Time:	2012-086T23:59:58.030
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012087_01

Start Time:	2012-087T00:00:09.046	Stop Time:	2012-087T23:59:51.670
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012088_01

Start Time:	2012-088T00:00:03.440	Stop Time:	2012-088T23:59:54.388
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012089_01

Start Time:	2012-089T00:00:00.013	Stop Time:	2012-089T23:59:58.841
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012090_01

Start Time:	2012-090T00:00:04.466	Stop Time:	2012-090T23:59:57.919
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012091_01

Start Time:	2012-091T00:00:03.543	Stop Time:	2012-091T23:59:58.621
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012092_01

Start Time:	2012-092T00:00:04.250	Stop Time:	2012-092T23:59:59.074
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012093_01

Start Time:	2012-093T00:00:04.703	Stop Time:	2012-093T23:59:54.776
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012094_01

Start Time:	2012-094T00:00:00.401	Stop Time:	2012-094T23:59:54.729
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012095_01

Start Time:	2012-095T00:00:00.354	Stop Time:	2012-095T23:59:55.431
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012096_01

Start Time:	2012-096T00:00:01.060	Stop Time:	2012-096T23:59:57.009
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012097_01

Start Time:	2012-097T00:00:02.634	Stop Time:	2012-097T23:59:55.586
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012098_01

Start Time:	2012-098T00:00:01.211	Stop Time:	2012-098T23:59:55.039
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012099_01

Start Time:	2012-099T00:00:00.664	Stop Time:	2012-099T23:59:55.492
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012100_01

Start Time:	2012-100T00:00:01.117	Stop Time:	2012-100T23:59:55.944
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012101_01

Start Time:	2012-101T00:00:01.569	Stop Time:	2012-101T23:59:55.397
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012102_01

Start Time:	2012-102T00:00:01.022	Stop Time:	2012-102T23:59:55.849
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012103_01

Start Time:	2012-103T00:00:01.474	Stop Time:	2012-103T23:59:56.302
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012104_01

Start Time:	2012-104T00:00:01.927	Stop Time:	2012-104T23:59:52.254
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012105_01

Start Time:	2012-105T00:00:03.270	Stop Time:	2012-105T23:59:57.660
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012106_01

Start Time:	2012-106T00:00:08.676	Stop Time:	2012-106T23:59:56.410
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012107_01

Start Time:	2012-107T00:00:02.034	Stop Time:	2012-107T23:59:59.987
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012108_01

Start Time:	2012-108T00:00:05.612	Stop Time:	2012-108T23:59:54.815
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012109_01

Start Time:	2012-109T00:00:00.440	Stop Time:	2012-109T23:59:55.267
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012110_01

Start Time:	2012-110T00:00:00.892	Stop Time:	2012-110T03:30:16.687
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012111_01

Start Time:	2012-111T10:42:24.604	Stop Time:	2012-111T23:59:55.172
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012112_01

Start Time:	2012-112T00:00:00.797	Stop Time:	2012-112T23:59:55.625
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012113_01

Start Time:	2012-113T00:00:01.250	Stop Time:	2012-113T23:59:55.077
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012114_01

Start Time:	2012-114T00:00:00.702	Stop Time:	2012-114T23:59:56.280
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012115_01

Start Time:	2012-115T00:00:01.905	Stop Time:	2012-115T23:59:58.108
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012116_01

Start Time:	2012-116T00:00:01.857	Stop Time:	2012-116T23:59:57.060
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012117_01

Start Time:	2012-117T00:00:02.685	Stop Time:	2012-117T23:59:55.388
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012118_01

Start Time:	2012-118T00:00:01.013	Stop Time:	2012-118T23:59:58.215
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012119_01

Start Time:	2012-119T00:00:03.840	Stop Time:	2012-119T23:59:55.543
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012120_01

Start Time:	2012-120T00:00:01.168	Stop Time:	2012-120T23:59:54.496
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012121_01

Start Time:	2012-121T00:00:00.121	Stop Time:	2012-121T23:59:55.699
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012122_01

Start Time:	2012-122T00:00:01.324	Stop Time:	2012-122T23:59:58.026
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012123_01

Start Time:	2012-123T00:00:01.776	Stop Time:	2012-123T23:59:56.604
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012124_01

Start Time:	2012-124T00:00:02.229	Stop Time:	2012-124T23:59:56.932
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012125_01

Start Time:	2012-125T00:00:02.556	Stop Time:	2012-125T23:59:55.509
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012126_01

Start Time:	2012-126T00:00:01.134	Stop Time:	2012-126T23:59:57.087
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012127_01

Start Time:	2012-127T00:00:02.712	Stop Time:	2012-127T23:59:59.664
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012128_01

Start Time:	2012-128T00:00:05.289	Stop Time:	2012-128T23:59:54.867
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012129_01

Start Time:	2012-129T00:00:00.492	Stop Time:	2012-129T23:59:59.944
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012130_01

Start Time:	2012-130T00:00:05.569	Stop Time:	2012-130T23:59:59.397
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012131_01

Start Time:	2012-131T00:00:05.022	Stop Time:	2012-131T23:59:56.599
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012132_01

Start Time:	2012-132T00:00:02.224	Stop Time:	2012-132T23:59:58.427
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012133_01

Start Time:	2012-133T00:00:04.052	Stop Time:	2012-133T23:59:55.258
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012134_01

Start Time:	2012-134T00:00:00.879	Stop Time:	2012-134T23:59:56.457
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012135_01

Start Time:	2012-135T00:00:02.082	Stop Time:	2012-135T23:59:56.410
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012136_01

Start Time:	2012-136T00:00:02.034	Stop Time:	2012-136T23:59:56.237
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012137_01

Start Time:	2012-137T00:00:01.862	Stop Time:	2012-137T23:59:55.190
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012138_01

Start Time:	2012-138T00:00:00.815	Stop Time:	2012-138T23:59:57.142
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012139_01

Start Time:	2012-139T00:00:02.767	Stop Time:	2012-139T23:59:56.974
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012140_01

Start Time:	2012-140T00:00:02.595	Stop Time:	2012-140T23:59:58.547
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012141_01

Start Time:	2012-141T00:00:04.172	Stop Time:	2012-141T23:59:59.000
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012142_01

Start Time:	2012-142T00:00:04.625	Stop Time:	2012-142T23:59:58.577
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012143_01

Start Time:	2012-143T00:00:03.265	Stop Time:	2012-143T23:59:56.905
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012144_01

Start Time:	2012-144T00:00:02.530	Stop Time:	2012-144T23:59:59.838
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012145_01

Start Time:	2012-145T00:00:07.896	Stop Time:	2012-145T23:59:59.923
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012146_01

Start Time:	2012-146T00:00:07.970	Stop Time:	2012-146T23:59:52.134
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012147_01

Start Time:	2012-147T00:00:00.130	Stop Time:	2012-147T23:59:53.965
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012148_01

Start Time:	2012-148T00:34:08.581	Stop Time:	2012-148T23:59:56.601
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012149_01

Start Time:	2012-149T00:00:04.558	Stop Time:	2012-149T23:59:56.120
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012150_01

Start Time:	2012-150T00:00:01.745	Stop Time:	2012-150T23:59:56.573
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012151_01

Start Time:	2012-151T00:00:02.198	Stop Time:	2012-151T23:59:56.025
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012152_01

Start Time:	2012-152T00:00:01.650	Stop Time:	2012-152T23:59:57.478
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012153_01

Start Time:	2012-153T00:00:03.103	Stop Time:	2012-153T23:59:56.930
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012154_01

Start Time:	2012-154T00:00:02.555	Stop Time:	2012-154T23:59:56.383
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012155_01

Start Time:	2012-155T00:00:02.008	Stop Time:	2012-155T23:59:54.960
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012156_01

Start Time:	2012-156T00:00:00.585	Stop Time:	2012-156T23:59:59.163
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012157_01

Start Time:	2012-157T00:00:02.913	Stop Time:	2012-157T23:59:57.740
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012158_01

Start Time:	2012-158T00:00:03.365	Stop Time:	2012-158T23:59:59.380
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012159_01

Start Time:	2012-159T00:00:02.193	Stop Time:	2012-159T23:59:55.208
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012160_01

Start Time:	2012-160T00:00:03.228	Stop Time:	2012-160T23:59:54.399
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012161_01

Start Time:	2012-161T00:00:02.317	Stop Time:	2012-161T23:59:59.176
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012162_01

Start Time:	2012-162T00:00:04.801	Stop Time:	2012-162T23:59:59.628
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012163_01

Start Time:	2012-163T00:00:05.253	Stop Time:	2012-163T23:59:54.456
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012164_01

Start Time:	2012-164T00:00:00.081	Stop Time:	2012-164T23:59:59.533
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012165_01

Start Time:	2012-165T00:00:05.158	Stop Time:	2012-165T23:59:59.986
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012166_01

Start Time:	2012-166T00:00:05.611	Stop Time:	2012-166T23:59:54.813
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012167_01

Start Time:	2012-167T00:00:00.438	Stop Time:	2012-167T23:59:59.891
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012168_01

Start Time:	2012-168T00:00:05.516	Stop Time:	2012-168T23:59:54.719
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012169_01

Start Time:	2012-169T00:00:00.344	Stop Time:	2012-169T23:59:55.172
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012170_01

Start Time:	2012-170T00:00:00.797	Stop Time:	2012-170T23:59:54.624
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012171_01

Start Time:	2012-171T00:00:00.249	Stop Time:	2012-171T23:59:55.077
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012172_01

Start Time:	2012-172T00:00:00.702	Stop Time:	2012-172T23:59:52.940
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012173_01

Start Time:	2012-173T00:00:00.975	Stop Time:	2012-173T23:59:55.763
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012174_01

Start Time:	2012-174T00:00:03.798	Stop Time:	2012-174T23:59:58.185
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012175_01

Start Time:	2012-175T00:00:03.810	Stop Time:	2012-175T23:59:56.200
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012176_01

Start Time:	2012-176T00:00:04.192	Stop Time:	2012-176T23:59:55.840
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012177_01

Start Time:	2012-177T00:00:01.465	Stop Time:	2012-177T23:59:53.195
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012178_01

Start Time:	2012-178T00:00:01.089	Stop Time:	2012-178T23:59:55.205
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012179_01

Start Time:	2012-179T00:00:00.830	Stop Time:	2012-179T23:59:59.282
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012180_01

Start Time:	2012-180T00:00:03.032	Stop Time:	2012-180T23:59:57.859
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012181_01

Start Time:	2012-181T00:00:03.487	Stop Time:	2012-181T23:59:58.435
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012182_01

Start Time:	2012-182T00:00:04.060	Stop Time:	2012-182T23:59:55.863
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012183_01

Start Time:	2012-183T00:00:02.895	Stop Time:	2012-183T23:59:56.213
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012184_01

Start Time:	2012-184T00:00:01.838	Stop Time:	2012-184T23:59:57.664
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012185_01

Start Time:	2012-185T00:00:03.293	Stop Time:	2012-185T23:59:57.116
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012186_01

Start Time:	2012-186T00:00:02.744	Stop Time:	2012-186T23:59:57.067
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012187_01

Start Time:	2012-187T00:00:02.692	Stop Time:	2012-187T23:59:56.518
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012188_01

Start Time:	2012-188T00:00:02.143	Stop Time:	2012-188T23:59:59.594
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012189_01

Start Time:	2012-189T00:00:05.219	Stop Time:	2012-189T23:59:54.420
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012190_01

Start Time:	2012-190T00:00:00.045	Stop Time:	2012-190T23:59:59.497
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012191_01

Start Time:	2012-191T00:00:05.122	Stop Time:	2012-191T23:59:57.948
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012192_01

Start Time:	2012-192T00:00:03.573	Stop Time:	2012-192T23:59:55.274
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012193_01

Start Time:	2012-193T00:00:00.899	Stop Time:	2012-193T23:59:54.725
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012194_01

Start Time:	2012-194T00:00:00.350	Stop Time:	2012-194T23:59:56.677
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012195_01

Start Time:	2012-195T00:00:02.302	Stop Time:	2012-195T23:59:56.128
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012196_01

Start Time:	2012-196T00:00:01.753	Stop Time:	2012-196T23:59:54.454
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012197_01

Start Time:	2012-197T00:00:00.079	Stop Time:	2012-197T23:59:54.905
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012198_01

Start Time:	2012-198T00:00:00.530	Stop Time:	2012-198T23:59:56.232
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012199_01

Start Time:	2012-199T00:00:01.857	Stop Time:	2012-199T23:59:55.683
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012200_01

Start Time:	2012-200T00:00:01.308	Stop Time:	2012-200T23:59:59.509
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012201_01

Start Time:	2012-201T00:00:05.134	Stop Time:	2012-201T23:59:58.210
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012202_01

Start Time:	2012-202T00:00:03.835	Stop Time:	2012-202T23:59:57.037
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012203_01

Start Time:	2012-203T00:00:02.661	Stop Time:	2012-203T23:59:57.613
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012204_01

Start Time:	2012-204T00:00:03.238	Stop Time:	2012-204T23:59:59.065
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012205_01

Start Time:	2012-205T00:00:02.815	Stop Time:	2012-205T23:59:54.829
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012206_01

Start Time:	2012-206T00:00:05.844	Stop Time:	2012-206T23:59:54.389
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012207_01

Start Time:	2012-207T00:00:05.405	Stop Time:	2012-207T23:59:59.430
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012208_01

Start Time:	2012-208T00:00:07.411	Stop Time:	2012-208T23:59:59.245
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012209_01

Start Time:	2012-209T00:00:04.870	Stop Time:	2012-209T23:59:59.696
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012210_01

Start Time:	2012-210T00:00:05.321	Stop Time:	2012-210T23:59:54.522
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012211_01

Start Time:	2012-211T00:00:00.147	Stop Time:	2012-211T23:59:59.599
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012212_01

Start Time:	2012-212T00:00:05.224	Stop Time:	2012-212T23:59:54.425
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012213_01

Start Time:	2012-213T00:00:00.050	Stop Time:	2012-213T23:59:55.626
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012214_01

Start Time:	2012-214T00:00:01.251	Stop Time:	2012-214T23:59:56.077
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012215_01

Start Time:	2012-215T00:00:01.702	Stop Time:	2012-215T23:59:51.482
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012216_01

Start Time:	2012-216T00:00:02.497	Stop Time:	2012-216T23:59:57.745
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012217_01

Start Time:	2012-217T00:00:08.761	Stop Time:	2012-217T23:59:51.322
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012218_01

Start Time:	2012-218T00:00:02.337	Stop Time:	2012-218T23:59:55.820
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012219_01

Start Time:	2012-219T00:00:06.835	Stop Time:	2012-219T23:59:52.209
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012220_01

Start Time:	2012-220T00:00:03.224	Stop Time:	2012-220T23:59:50.691
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012221_01

Start Time:	2012-221T00:00:01.707	Stop Time:	2012-221T23:59:54.220
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012222_01

Start Time:	2012-222T00:00:04.990	Stop Time:	2012-222T23:59:50.469
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012223_01

Start Time:	2012-223T00:00:01.484	Stop Time:	2012-223T23:59:52.904
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012224_01

Start Time:	2012-224T00:00:03.920	Stop Time:	2012-224T23:59:57.496
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012225_01

Start Time:	2012-225T00:00:08.512	Stop Time:	2012-225T23:59:52.994
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012226_01

Start Time:	2012-226T00:00:04.010	Stop Time:	2012-226T23:59:49.246
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012227_01

Start Time:	2012-227T00:00:00.258	Stop Time:	2012-227T23:59:55.850
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012228_01

Start Time:	2012-228T00:00:06.865	Stop Time:	2012-228T23:59:51.348
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012229_01

Start Time:	2012-229T00:00:02.363	Stop Time:	2012-229T23:59:56.350
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012230_01

Start Time:	2012-230T00:00:04.268	Stop Time:	2012-230T23:59:51.125
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012231_01

Start Time:	2012-231T00:00:02.141	Stop Time:	2012-231T23:59:53.452
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012232_01

Start Time:	2012-232T00:00:01.448	Stop Time:	2012-232T23:59:55.028
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012233_01

Start Time:	2012-233T00:00:06.043	Stop Time:	2012-233T17:36:18.781
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012234_01

Start Time:	2012-234T23:16:33.873	Stop Time:	2012-234T23:59:53.040
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012235_01

Start Time:	2012-235T00:00:04.055	Stop Time:	2012-235T23:59:54.272
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012236_01

Start Time:	2012-236T00:00:02.268	Stop Time:	2012-236T23:59:57.973
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012237_01

Start Time:	2012-237T00:00:08.989	Stop Time:	2012-237T23:59:54.221
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012238_01

Start Time:	2012-238T00:00:05.237	Stop Time:	2012-238T23:59:50.720
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012239_01

Start Time:	2012-239T00:00:01.735	Stop Time:	2012-239T23:59:56.296
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012240_01

Start Time:	2012-240T00:00:07.311	Stop Time:	2012-240T23:59:54.716
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012241_01

Start Time:	2012-241T00:00:05.731	Stop Time:	2012-241T23:59:55.042
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012242_01

Start Time:	2012-242T00:00:06.058	Stop Time:	2012-242T23:59:57.443
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012243_01

Start Time:	2012-243T00:00:05.439	Stop Time:	2012-243T23:59:54.929
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012244_01

Start Time:	2012-244T00:00:02.937	Stop Time:	2012-244T23:59:56.388
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012245_01

Start Time:	2012-245T00:00:04.318	Stop Time:	2012-245T23:59:51.910
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012246_01

Start Time:	2012-246T00:00:02.925	Stop Time:	2012-246T23:59:57.517
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012247_01

Start Time:	2012-247T00:00:01.267	Stop Time:	2012-247T23:59:56.093
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012248_01

Start Time:	2012-248T00:00:01.718	Stop Time:	2012-248T23:59:59.670
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012249_01

Start Time:	2012-249T00:00:05.294	Stop Time:	2012-249T23:59:54.496
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012250_01

Start Time:	2012-250T00:00:00.121	Stop Time:	2012-250T23:59:52.357
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012251_01

Start Time:	2012-251T00:00:00.404	Stop Time:	2012-251T23:59:56.453
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012252_01

Start Time:	2012-252T00:00:04.433	Stop Time:	2012-252T23:59:59.959
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012253_01

Start Time:	2012-253T00:00:07.955	Stop Time:	2012-253T23:59:53.208
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012254_01

Start Time:	2012-254T00:00:01.165	Stop Time:	2012-254T23:59:55.691
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012255_01

Start Time:	2012-255T00:00:03.659	Stop Time:	2012-255T23:59:54.239
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012256_01

Start Time:	2012-256T00:00:02.353	Stop Time:	2012-256T23:59:58.691
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012257_01

Start Time:	2012-257T00:00:06.671	Stop Time:	2012-257T23:59:58.482
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012258_01

Start Time:	2012-258T00:00:04.107	Stop Time:	2012-258T23:59:57.933
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012259_01

Start Time:	2012-259T00:00:03.558	Stop Time:	2012-259T23:59:58.384
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012260_01

Start Time:	2012-260T00:00:04.009	Stop Time:	2012-260T23:59:58.836
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012261_01

Start Time:	2012-261T00:00:04.460	Stop Time:	2012-261T23:59:58.287
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012262_01

Start Time:	2012-262T00:00:03.912	Stop Time:	2012-262T23:59:58.738
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012263_01

Start Time:	2012-263T00:00:04.363	Stop Time:	2012-263T23:59:59.189
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012264_01

Start Time:	2012-264T00:00:04.814	Stop Time:	2012-264T23:59:58.641
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012265_01

Start Time:	2012-265T00:00:04.266	Stop Time:	2012-265T23:59:59.092
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012266_01

Start Time:	2012-266T00:00:04.717	Stop Time:	2012-266T23:59:55.793
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012267_01

Start Time:	2012-267T00:00:03.293	Stop Time:	2012-267T23:59:57.057
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012268_01

Start Time:	2012-268T00:00:03.619	Stop Time:	2012-268T23:59:58.696
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012269_01

Start Time:	2012-269T00:00:06.196	Stop Time:	2012-269T23:59:52.647
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012270_01

Start Time:	2012-270T00:00:00.147	Stop Time:	2012-270T23:59:59.145
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012271_01

Start Time:	2012-271T00:00:10.161	Stop Time:	2012-271T23:59:52.065
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012272_01

Start Time:	2012-272T00:00:00.022	Stop Time:	2012-272T23:59:57.751
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012273_01

Start Time:	2012-273T00:00:03.376	Stop Time:	2012-273T23:59:55.702
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012274_01

Start Time:	2012-274T00:00:01.327	Stop Time:	2012-274T23:59:56.153
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012275_01

Start Time:	2012-275T00:00:01.778	Stop Time:	2012-275T23:59:55.604
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012276_01

Start Time:	2012-276T00:00:01.229	Stop Time:	2012-276T23:59:56.056
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012277_01

Start Time:	2012-277T00:00:01.681	Stop Time:	2012-277T23:59:55.507
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012278_01

Start Time:	2012-278T00:00:01.132	Stop Time:	2012-278T23:59:55.958
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012279_01

Start Time:	2012-279T00:00:01.583	Stop Time:	2012-279T23:59:56.409
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012280_01

Start Time:	2012-280T00:00:02.034	Stop Time:	2012-280T23:59:55.861
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012281_01

Start Time:	2012-281T00:00:01.486	Stop Time:	2012-281T23:59:56.312
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012282_01

Start Time:	2012-282T00:00:01.937	Stop Time:	2012-282T23:59:56.763
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012283_01

Start Time:	2012-283T00:00:02.388	Stop Time:	2012-283T23:59:57.214
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012284_01

Start Time:	2012-284T00:00:02.839	Stop Time:	2012-284T23:59:56.666
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012285_01

Start Time:	2012-285T00:00:02.291	Stop Time:	2012-285T23:59:57.117
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012286_01

Start Time:	2012-286T00:00:02.742	Stop Time:	2012-286T23:59:59.818
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012287_01

Start Time:	2012-287T00:00:03.568	Stop Time:	2012-287T23:59:57.520
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012288_01

Start Time:	2012-288T00:00:01.270	Stop Time:	2012-288T23:59:57.846
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012289_01

Start Time:	2012-289T00:00:03.471	Stop Time:	2012-289T23:59:56.422
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012290_01

Start Time:	2012-290T00:00:02.047	Stop Time:	2012-290T23:59:59.127
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012291_01

Start Time:	2012-291T00:00:02.873	Stop Time:	2012-291T23:59:56.200
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012292_01

Start Time:	2012-292T00:00:01.825	Stop Time:	2012-292T23:59:58.889
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012293_01

Start Time:	2012-293T00:00:06.819	Stop Time:	2012-293T20:13:22.938
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012303_01

Start Time:	2012-303T14:42:22.206	Stop Time:	2012-303T23:59:58.490
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012304_01

Start Time:	2012-304T00:00:05.990	Stop Time:	2012-304T23:59:59.940
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012305_01

Start Time:	2012-305T00:00:07.440	Stop Time:	2012-305T23:59:56.016
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012306_01

Start Time:	2012-306T00:00:01.641	Stop Time:	2012-306T23:59:56.468
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012307_01

Start Time:	2012-307T00:00:02.093	Stop Time:	2012-307T23:59:55.028
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012308_01

Start Time:	2012-308T00:00:05.798	Stop Time:	2012-308T23:59:50.277
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012309_01

Start Time:	2012-309T00:00:01.292	Stop Time:	2012-309T23:59:51.853
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012310_01

Start Time:	2012-310T00:00:02.868	Stop Time:	2012-310T23:59:59.366
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012311_01

Start Time:	2012-311T00:00:10.382	Stop Time:	2012-311T23:59:51.646
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012312_01

Start Time:	2012-312T00:00:02.662	Stop Time:	2012-312T23:59:55.160
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012313_01

Start Time:	2012-313T00:00:06.175	Stop Time:	2012-313T23:59:50.658
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012314_01

Start Time:	2012-314T00:00:01.673	Stop Time:	2012-314T23:59:58.172
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012315_01

Start Time:	2012-315T00:00:09.187	Stop Time:	2012-315T23:59:53.420
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012316_01

Start Time:	2012-316T00:00:04.435	Stop Time:	2012-316T23:59:49.918
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012317_01

Start Time:	2012-317T00:00:00.934	Stop Time:	2012-317T23:59:55.307
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012318_01

Start Time:	2012-318T00:00:00.932	Stop Time:	2012-318T23:59:55.758
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012319_01

Start Time:	2012-319T00:00:01.383	Stop Time:	2012-319T23:59:56.272
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012320_01

Start Time:	2012-320T00:00:07.287	Stop Time:	2012-320T23:59:56.352
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012321_01

Start Time:	2012-321T00:00:04.309	Stop Time:	2012-321T23:59:59.116
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012322_01

Start Time:	2012-322T00:00:10.127	Stop Time:	2012-322T23:59:54.610
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012323_01

Start Time:	2012-323T00:00:05.626	Stop Time:	2012-323T23:59:53.202
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012324_01

Start Time:	2012-324T00:00:04.217	Stop Time:	2012-324T23:59:57.513
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012325_01

Start Time:	2012-325T00:00:08.528	Stop Time:	2012-325T23:59:51.073
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012326_01

Start Time:	2012-326T00:00:02.089	Stop Time:	2012-326T23:59:58.587
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012327_01

Start Time:	2012-327T00:00:09.603	Stop Time:	2012-327T23:59:53.835
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012328_01

Start Time:	2012-328T00:00:04.851	Stop Time:	2012-328T23:59:50.333
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012329_01

Start Time:	2012-329T00:00:01.349	Stop Time:	2012-329T23:59:56.847
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012330_01

Start Time:	2012-330T00:00:07.863	Stop Time:	2012-330T23:59:53.345
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012331_01

Start Time:	2012-331T00:00:04.361	Stop Time:	2012-331T23:59:59.859
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012332_01

Start Time:	2012-332T00:00:10.628	Stop Time:	2012-332T23:59:56.326
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012333_01

Start Time:	2012-333T00:00:01.951	Stop Time:	2012-333T23:59:56.777
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012334_01

Start Time:	2012-334T00:00:00.527	Stop Time:	2012-334T23:59:57.229
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012335_01

Start Time:	2012-335T00:00:02.853	Stop Time:	2012-335T23:59:54.902
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012336_01

Start Time:	2012-336T00:00:02.856	Stop Time:	2012-336T23:59:56.303
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012337_01

Start Time:	2012-337T00:00:04.221	Stop Time:	2012-337T23:59:57.707
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012338_01

Start Time:	2012-338T00:00:03.336	Stop Time:	2012-338T23:59:57.159
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012339_01

Start Time:	2012-339T00:00:02.788	Stop Time:	2012-339T23:59:57.610
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012340_01

Start Time:	2012-340T00:00:03.239	Stop Time:	2012-340T23:59:58.061
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012341_01

Start Time:	2012-341T00:00:03.690	Stop Time:	2012-341T23:59:57.513
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012342_01

Start Time:	2012-342T00:00:03.141	Stop Time:	2012-342T23:59:57.964
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012343_01

Start Time:	2012-343T00:00:03.593	Stop Time:	2012-343T23:59:55.009
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012344_01

Start Time:	2012-344T00:00:03.005	Stop Time:	2012-344T23:59:58.495
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012345_01

Start Time:	2012-345T00:00:04.116	Stop Time:	2012-345T23:59:58.947
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012346_01

Start Time:	2012-346T00:00:04.568	Stop Time:	2012-346T23:59:55.320
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012347_01

Start Time:	2012-347T00:00:03.316	Stop Time:	2012-347T23:59:55.970
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012348_01

Start Time:	2012-348T00:00:01.595	Stop Time:	2012-348T23:59:56.422
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012349_01

Start Time:	2012-349T00:00:02.046	Stop Time:	2012-349T23:59:56.873
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012350_01

Start Time:	2012-350T00:00:02.498	Stop Time:	2012-350T23:59:56.324
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012351_01

Start Time:	2012-351T00:00:01.949	Stop Time:	2012-351T23:59:56.774
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012352_01

Start Time:	2012-352T00:00:02.399	Stop Time:	2012-352T23:59:58.476
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012353_01

Start Time:	2012-353T00:00:04.101	Stop Time:	2012-353T23:59:58.927
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012354_01

Start Time:	2012-354T00:00:04.552	Stop Time:	2012-354T23:59:58.378
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012355_01

Start Time:	2012-355T00:00:04.003	Stop Time:	2012-355T23:59:58.830
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012356_01

Start Time:	2012-356T00:00:04.454	Stop Time:	2012-356T23:59:58.406
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012357_01

Start Time:	2012-357T00:00:02.156	Stop Time:	2012-357T23:59:55.107
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012358_01

Start Time:	2012-358T00:00:00.732	Stop Time:	2012-358T23:59:55.738
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012359_01

Start Time:	2012-359T00:00:03.719	Stop Time:	2012-359T23:59:55.885
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012360_01

Start Time:	2012-360T00:00:01.510	Stop Time:	2012-360T23:59:55.336
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012361_01

Start Time:	2012-361T00:00:00.961	Stop Time:	2012-361T23:59:57.256
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012362_01

Start Time:	2012-362T00:00:08.272	Stop Time:	2012-362T23:59:56.719
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012363_01

Start Time:	2012-363T00:00:04.739	Stop Time:	2012-363T23:59:50.284
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012364_01

Start Time:	2012-364T00:00:01.299	Stop Time:	2012-364T23:59:57.547
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012365_01

Start Time:	2012-365T00:00:08.563	Stop Time:	2012-365T23:59:53.046
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2012366_01

Start Time:	2012-366T00:00:04.061	Stop Time:	2012-366T23:59:49.544
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in