PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LACCFULL0/ 2011 /

LACCFULL0_2011001_01

Start Time:	2011-001T00:00:01.769	Stop Time:	2011-001T23:59:56.598
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011002_01

Start Time:	2011-002T00:00:02.223	Stop Time:	2011-002T23:59:58.178
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011003_01

Start Time:	2011-003T00:00:03.803	Stop Time:	2011-003T23:59:58.632
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011004_01

Start Time:	2011-004T00:00:04.257	Stop Time:	2011-004T23:59:56.961
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011005_01

Start Time:	2011-005T00:00:02.586	Stop Time:	2011-005T23:59:57.416
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011006_01

Start Time:	2011-006T00:00:03.041	Stop Time:	2011-006T23:59:59.620
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011007_01

Start Time:	2011-007T00:00:05.249	Stop Time:	2011-007T23:59:57.574
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011008_01

Start Time:	2011-008T00:00:03.199	Stop Time:	2011-008T23:59:59.904
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011009_01

Start Time:	2011-009T00:00:03.654	Stop Time:	2011-009T23:47:37.847
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011010_01

Start Time:	2011-010T00:34:49.599	Stop Time:	2011-010T23:59:52.141
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011011_01

Start Time:	2011-011T00:00:03.156	Stop Time:	2011-011T23:59:55.892
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011012_01

Start Time:	2011-012T00:00:01.521	Stop Time:	2011-012T23:59:57.221
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011013_01

Start Time:	2011-013T00:00:00.971	Stop Time:	2011-013T23:59:57.675
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011014_01

Start Time:	2011-014T00:00:03.300	Stop Time:	2011-014T23:59:58.130
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011015_01

Start Time:	2011-015T00:00:03.755	Stop Time:	2011-015T23:59:57.584
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011016_01

Start Time:	2011-016T00:00:03.209	Stop Time:	2011-016T23:59:58.038
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011017_01

Start Time:	2011-017T00:00:03.663	Stop Time:	2011-017T23:59:58.258
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011018_01

Start Time:	2011-018T00:00:09.274	Stop Time:	2011-018T23:59:54.759
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011019_01

Start Time:	2011-019T00:00:05.775	Stop Time:	2011-019T23:59:50.261
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011020_01

Start Time:	2011-020T00:00:01.276	Stop Time:	2011-020T23:59:54.481
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011021_01

Start Time:	2011-021T00:00:00.106	Stop Time:	2011-021T23:59:59.559
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011022_01

Start Time:	2011-022T00:00:05.184	Stop Time:	2011-022T23:59:54.388
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011023_01

Start Time:	2011-023T00:00:00.013	Stop Time:	2011-023T23:59:58.093
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011024_01

Start Time:	2011-024T00:00:03.717	Stop Time:	2011-024T08:49:39.142
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011025_01

Start Time:	2011-025T14:00:59.439	Stop Time:	2011-025T23:59:57.001
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011026_01

Start Time:	2011-026T00:00:02.626	Stop Time:	2011-026T23:59:57.455
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011027_01

Start Time:	2011-027T00:00:03.080	Stop Time:	2011-027T23:59:56.910
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011028_01

Start Time:	2011-028T00:00:02.535	Stop Time:	2011-028T23:59:57.364
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011029_01

Start Time:	2011-029T00:00:02.989	Stop Time:	2011-029T23:59:58.193
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011030_01

Start Time:	2011-030T00:00:01.943	Stop Time:	2011-030T23:59:59.648
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011031_01

Start Time:	2011-031T00:00:03.398	Stop Time:	2011-031T23:59:54.477
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011032_01

Start Time:	2011-032T00:00:00.102	Stop Time:	2011-032T23:59:57.857
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011033_01

Start Time:	2011-033T00:00:05.838	Stop Time:	2011-033T23:59:56.515
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011034_01

Start Time:	2011-034T00:00:01.198	Stop Time:	2011-034T23:59:52.328
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011035_01

Start Time:	2011-035T00:00:00.387	Stop Time:	2011-035T23:59:58.423
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011036_01

Start Time:	2011-036T00:00:06.443	Stop Time:	2011-036T23:59:54.881
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011037_01

Start Time:	2011-037T00:00:02.889	Stop Time:	2011-037T23:59:57.703
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011038_01

Start Time:	2011-038T00:00:02.390	Stop Time:	2011-038T23:59:55.509
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011039_01

Start Time:	2011-039T00:00:02.786	Stop Time:	2011-039T23:59:56.924
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011040_01

Start Time:	2011-040T00:00:01.612	Stop Time:	2011-040T23:59:56.179
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011041_01

Start Time:	2011-041T00:00:04.121	Stop Time:	2011-041T23:59:56.337
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011042_01

Start Time:	2011-042T00:00:04.149	Stop Time:	2011-042T23:59:54.971
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011043_01

Start Time:	2011-043T00:00:02.900	Stop Time:	2011-043T23:59:59.679
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011044_01

Start Time:	2011-044T00:00:04.366	Stop Time:	2011-044T23:59:58.883
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011045_01

Start Time:	2011-045T00:00:03.571	Stop Time:	2011-045T23:59:57.275
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011046_01

Start Time:	2011-046T00:00:01.966	Stop Time:	2011-046T23:59:56.542
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011047_01

Start Time:	2011-047T00:00:01.229	Stop Time:	2011-047T23:59:55.246
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011048_01

Start Time:	2011-048T00:00:00.875	Stop Time:	2011-048T23:59:56.575
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011049_01

Start Time:	2011-049T00:00:00.325	Stop Time:	2011-049T23:59:56.155
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011050_01

Start Time:	2011-050T00:00:00.842	Stop Time:	2011-050T23:59:57.609
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011051_01

Start Time:	2011-051T00:00:00.422	Stop Time:	2011-051T23:59:58.251
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011052_01

Start Time:	2011-052T00:00:01.063	Stop Time:	2011-052T23:59:59.311
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011053_01

Start Time:	2011-053T00:00:07.330	Stop Time:	2011-053T23:59:57.847
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011054_01

Start Time:	2011-054T00:00:03.472	Stop Time:	2011-054T23:59:58.301
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011055_01

Start Time:	2011-055T00:00:03.926	Stop Time:	2011-055T23:59:52.838
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011056_01

Start Time:	2011-056T00:00:00.884	Stop Time:	2011-056T23:59:59.210
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011057_01

Start Time:	2011-057T00:00:04.835	Stop Time:	2011-057T23:59:53.930
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011058_01

Start Time:	2011-058T00:00:02.004	Stop Time:	2011-058T23:59:59.482
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011059_01

Start Time:	2011-059T00:00:07.529	Stop Time:	2011-059T23:59:58.698
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011060_01

Start Time:	2011-060T00:00:04.327	Stop Time:	2011-060T23:59:59.277
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011061_01

Start Time:	2011-061T00:00:04.902	Stop Time:	2011-061T23:59:58.856
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011062_01

Start Time:	2011-062T00:00:04.481	Stop Time:	2011-062T23:59:59.311
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011063_01

Start Time:	2011-063T00:00:04.936	Stop Time:	2011-063T23:59:59.765
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011064_01

Start Time:	2011-064T00:00:05.390	Stop Time:	2011-064T23:59:59.223
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011065_01

Start Time:	2011-065T00:00:04.848	Stop Time:	2011-065T23:59:59.677
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011066_01

Start Time:	2011-066T00:00:05.302	Stop Time:	2011-066T23:59:54.510
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011067_01

Start Time:	2011-067T00:00:00.131	Stop Time:	2011-067T23:59:59.585
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011068_01

Start Time:	2011-068T00:00:05.210	Stop Time:	2011-068T23:59:49.647
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011069_01

Start Time:	2011-069T00:00:00.416	Stop Time:	2011-069T23:59:56.913
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011070_01

Start Time:	2011-070T00:00:07.929	Stop Time:	2011-070T23:59:53.351
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011071_01

Start Time:	2011-071T00:00:04.367	Stop Time:	2011-071T23:59:49.852
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011072_01

Start Time:	2011-072T00:00:00.868	Stop Time:	2011-072T23:59:52.306
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011073_01

Start Time:	2011-073T00:00:03.321	Stop Time:	2011-073T23:59:59.822
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011074_01

Start Time:	2011-074T00:00:10.838	Stop Time:	2011-074T23:59:55.510
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011075_01

Start Time:	2011-075T00:00:01.139	Stop Time:	2011-075T23:59:55.964
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011076_01

Start Time:	2011-076T00:00:01.593	Stop Time:	2011-076T23:59:54.793
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011077_01

Start Time:	2011-077T00:00:00.418	Stop Time:	2011-077T23:59:59.872
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011078_01

Start Time:	2011-078T00:00:05.501	Stop Time:	2011-078T23:59:58.200
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011079_01

Start Time:	2011-079T00:00:01.950	Stop Time:	2011-079T23:59:58.654
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011080_01

Start Time:	2011-080T00:00:04.279	Stop Time:	2011-080T23:59:56.862
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011081_01

Start Time:	2011-081T00:00:02.483	Stop Time:	2011-081T23:59:56.800
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011082_01

Start Time:	2011-082T00:00:04.741	Stop Time:	2011-082T23:59:59.516
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011083_01

Start Time:	2011-083T00:00:05.141	Stop Time:	2011-083T23:59:57.969
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011084_01

Start Time:	2011-084T00:00:03.594	Stop Time:	2011-084T23:59:57.548
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011085_01

Start Time:	2011-085T00:00:03.173	Stop Time:	2011-085T23:59:54.502
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011086_01

Start Time:	2011-086T00:00:00.127	Stop Time:	2011-086T23:59:57.956
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011087_01

Start Time:	2011-087T00:00:03.581	Stop Time:	2011-087T23:59:55.160
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011088_01

Start Time:	2011-088T00:00:00.785	Stop Time:	2011-088T23:59:59.863
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011089_01

Start Time:	2011-089T00:00:05.488	Stop Time:	2011-089T23:59:54.692
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011090_01

Start Time:	2011-090T00:00:00.317	Stop Time:	2011-090T23:59:59.521
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011091_01

Start Time:	2011-091T00:00:05.146	Stop Time:	2011-091T23:59:58.975
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011092_01

Start Time:	2011-092T00:00:04.600	Stop Time:	2011-092T23:59:55.428
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011093_01

Start Time:	2011-093T00:00:01.053	Stop Time:	2011-093T23:59:55.882
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011094_01

Start Time:	2011-094T00:00:01.507	Stop Time:	2011-094T23:59:55.461
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011095_01

Start Time:	2011-095T00:00:01.086	Stop Time:	2011-095T23:59:54.915
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011096_01

Start Time:	2011-096T00:00:00.540	Stop Time:	2011-096T23:59:54.869
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011097_01

Start Time:	2011-097T00:00:00.494	Stop Time:	2011-097T23:59:59.947
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011098_01

Start Time:	2011-098T00:00:05.576	Stop Time:	2011-098T23:59:59.776
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011099_01

Start Time:	2011-099T00:00:05.401	Stop Time:	2011-099T23:59:54.605
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011100_01

Start Time:	2011-100T00:00:00.230	Stop Time:	2011-100T23:59:57.684
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011101_01

Start Time:	2011-101T00:00:03.309	Stop Time:	2011-101T23:59:58.137
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011102_01

Start Time:	2011-102T00:00:03.762	Stop Time:	2011-102T23:59:56.091
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011103_01

Start Time:	2011-103T00:00:01.716	Stop Time:	2011-103T23:59:58.299
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011104_01

Start Time:	2011-104T00:00:03.920	Stop Time:	2011-104T23:59:55.249
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011105_01

Start Time:	2011-105T00:00:00.874	Stop Time:	2011-105T23:59:57.703
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011106_01

Start Time:	2011-106T00:00:03.327	Stop Time:	2011-106T23:59:58.281
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011107_01

Start Time:	2011-107T00:00:03.906	Stop Time:	2011-107T23:59:58.735
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011108_01

Start Time:	2011-108T00:00:04.360	Stop Time:	2011-108T23:59:54.939
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011109_01

Start Time:	2011-109T00:00:00.568	Stop Time:	2011-109T23:59:55.393
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011110_01

Start Time:	2011-110T00:00:01.018	Stop Time:	2011-110T23:59:59.221
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011111_01

Start Time:	2011-111T00:00:04.846	Stop Time:	2011-111T23:59:58.300
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011112_01

Start Time:	2011-112T00:00:03.929	Stop Time:	2011-112T23:59:55.879
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011113_01

Start Time:	2011-113T00:00:01.504	Stop Time:	2011-113T23:59:56.333
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011114_01

Start Time:	2011-114T00:00:01.958	Stop Time:	2011-114T23:59:56.786
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011115_01

Start Time:	2011-115T00:00:02.411	Stop Time:	2011-115T23:59:56.240
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011116_01

Start Time:	2011-116T00:00:01.865	Stop Time:	2011-116T23:59:56.694
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011117_01

Start Time:	2011-117T00:00:02.319	Stop Time:	2011-117T23:59:57.148
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011118_01

Start Time:	2011-118T00:00:02.773	Stop Time:	2011-118T23:59:57.602
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011119_01

Start Time:	2011-119T00:00:03.226	Stop Time:	2011-119T23:59:57.056
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011120_01

Start Time:	2011-120T00:00:02.681	Stop Time:	2011-120T23:59:57.510
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011121_01

Start Time:	2011-121T00:00:03.135	Stop Time:	2011-121T23:59:57.964
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011122_01

Start Time:	2011-122T00:00:03.589	Stop Time:	2011-122T23:59:56.168
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011123_01

Start Time:	2011-123T00:00:01.793	Stop Time:	2011-123T23:59:55.746
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011124_01

Start Time:	2011-124T00:00:01.375	Stop Time:	2011-124T23:59:55.700
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011125_01

Start Time:	2011-125T00:00:01.325	Stop Time:	2011-125T23:59:54.654
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011126_01

Start Time:	2011-126T00:00:00.283	Stop Time:	2011-126T23:59:58.233
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011127_01

Start Time:	2011-127T00:00:03.858	Stop Time:	2011-127T23:59:58.686
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011128_01

Start Time:	2011-128T00:00:04.311	Stop Time:	2011-128T23:59:59.640
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011129_01

Start Time:	2011-129T00:00:03.390	Stop Time:	2011-129T23:59:52.906
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011130_01

Start Time:	2011-130T00:00:00.809	Stop Time:	2011-130T23:59:59.048
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011131_01

Start Time:	2011-131T00:00:02.798	Stop Time:	2011-131T23:59:59.501
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011132_01

Start Time:	2011-132T00:00:05.126	Stop Time:	2011-132T23:59:59.955
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011133_01

Start Time:	2011-133T00:00:05.580	Stop Time:	2011-133T23:59:59.409
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011134_01

Start Time:	2011-134T00:00:05.034	Stop Time:	2011-134T23:59:59.863
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011135_01

Start Time:	2011-135T00:00:05.488	Stop Time:	2011-135T23:59:54.691
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011136_01

Start Time:	2011-136T00:00:00.316	Stop Time:	2011-136T23:59:59.770
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011137_01

Start Time:	2011-137T00:00:05.395	Stop Time:	2011-137T23:59:54.599
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011138_01

Start Time:	2011-138T00:00:00.224	Stop Time:	2011-138T23:59:55.053
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011139_01

Start Time:	2011-139T00:00:00.678	Stop Time:	2011-139T23:59:54.507
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011140_01

Start Time:	2011-140T00:00:00.131	Stop Time:	2011-140T23:59:54.960
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011141_01

Start Time:	2011-141T00:00:00.585	Stop Time:	2011-141T23:59:55.414
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011142_01

Start Time:	2011-142T00:00:01.039	Stop Time:	2011-142T23:59:55.868
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011143_01

Start Time:	2011-143T00:00:01.493	Stop Time:	2011-143T23:59:55.322
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011144_01

Start Time:	2011-144T00:00:00.947	Stop Time:	2011-144T23:59:54.904
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011145_01

Start Time:	2011-145T00:00:00.525	Stop Time:	2011-145T23:59:59.104
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011146_01

Start Time:	2011-146T00:00:02.854	Stop Time:	2011-146T23:59:58.683
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011147_01

Start Time:	2011-147T00:00:04.308	Stop Time:	2011-147T23:59:58.265
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011148_01

Start Time:	2011-148T00:00:02.012	Stop Time:	2011-148T23:59:54.090
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011149_01

Start Time:	2011-149T00:23:59.710	Stop Time:	2011-149T23:59:56.419
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011150_01

Start Time:	2011-150T00:00:00.169	Stop Time:	2011-150T23:59:57.873
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011151_01

Start Time:	2011-151T00:00:03.498	Stop Time:	2011-151T23:59:58.327
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011152_01

Start Time:	2011-152T00:00:03.952	Stop Time:	2011-152T23:59:57.780
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011153_01

Start Time:	2011-153T00:00:03.405	Stop Time:	2011-153T23:59:58.234
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011154_01

Start Time:	2011-154T00:00:03.859	Stop Time:	2011-154T23:59:58.688
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011155_01

Start Time:	2011-155T00:00:04.313	Stop Time:	2011-155T23:59:58.142
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011156_01

Start Time:	2011-156T00:00:03.767	Stop Time:	2011-156T23:59:54.349
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011157_01

Start Time:	2011-157T00:00:02.380	Stop Time:	2011-157T23:59:57.299
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011158_01

Start Time:	2011-158T00:00:02.924	Stop Time:	2011-158T23:59:57.624
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011159_01

Start Time:	2011-159T00:00:05.554	Stop Time:	2011-159T23:59:56.957
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011160_01

Start Time:	2011-160T00:00:02.582	Stop Time:	2011-160T23:59:54.660
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011161_01

Start Time:	2011-161T00:00:00.285	Stop Time:	2011-161T23:59:59.739
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011162_01

Start Time:	2011-162T00:00:05.364	Stop Time:	2011-162T23:59:58.818
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011163_01

Start Time:	2011-163T00:00:04.443	Stop Time:	2011-163T23:59:59.272
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011164_01

Start Time:	2011-164T00:00:04.897	Stop Time:	2011-164T23:59:57.475
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011165_01

Start Time:	2011-165T00:00:03.100	Stop Time:	2011-165T23:59:56.648
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011166_01

Start Time:	2011-166T00:00:04.734	Stop Time:	2011-166T23:59:56.547
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011167_01

Start Time:	2011-167T00:00:04.609	Stop Time:	2011-167T23:59:56.313
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011168_01

Start Time:	2011-168T00:00:04.305	Stop Time:	2011-168T23:59:54.760
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011169_01

Start Time:	2011-169T00:00:02.729	Stop Time:	2011-169T23:59:59.995
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011170_01

Start Time:	2011-170T00:00:05.620	Stop Time:	2011-170T23:59:53.703
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011171_01

Start Time:	2011-171T00:00:01.593	Stop Time:	2011-171T23:59:49.157
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011172_01

Start Time:	2011-172T00:00:00.168	Stop Time:	2011-172T23:59:52.571
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011173_01

Start Time:	2011-173T00:00:00.552	Stop Time:	2011-173T23:59:54.068
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011174_01

Start Time:	2011-174T00:00:02.076	Stop Time:	2011-174T23:59:56.733
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011175_01

Start Time:	2011-175T00:00:07.748	Stop Time:	2011-175T23:59:59.983
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011176_01

Start Time:	2011-176T00:00:10.999	Stop Time:	2011-176T23:59:58.796
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011177_01

Start Time:	2011-177T00:00:04.421	Stop Time:	2011-177T23:59:59.250
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011178_01

Start Time:	2011-178T00:00:04.875	Stop Time:	2011-178T23:59:58.704
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011179_01

Start Time:	2011-179T00:00:04.329	Stop Time:	2011-179T23:59:59.158
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011180_01

Start Time:	2011-180T00:00:04.783	Stop Time:	2011-180T23:59:59.611
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011181_01

Start Time:	2011-181T00:00:05.236	Stop Time:	2011-181T23:59:59.065
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011182_01

Start Time:	2011-182T00:00:04.690	Stop Time:	2011-182T23:59:59.519
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011183_01

Start Time:	2011-183T00:00:05.144	Stop Time:	2011-183T23:59:59.973
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011184_01

Start Time:	2011-184T00:00:05.598	Stop Time:	2011-184T23:59:59.426
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011185_01

Start Time:	2011-185T00:00:05.051	Stop Time:	2011-185T23:59:59.880
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011186_01

Start Time:	2011-186T00:00:05.505	Stop Time:	2011-186T23:59:55.209
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011187_01

Start Time:	2011-187T00:00:00.834	Stop Time:	2011-187T23:59:55.663
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011188_01

Start Time:	2011-188T00:00:01.288	Stop Time:	2011-188T23:59:55.116
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011189_01

Start Time:	2011-189T00:00:00.741	Stop Time:	2011-189T23:59:55.570
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011190_01

Start Time:	2011-190T00:00:01.195	Stop Time:	2011-190T23:59:54.899
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011191_01

Start Time:	2011-191T00:00:00.524	Stop Time:	2011-191T23:59:59.978
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011192_01

Start Time:	2011-192T00:00:03.728	Stop Time:	2011-192T23:59:58.556
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011193_01

Start Time:	2011-193T00:00:04.181	Stop Time:	2011-193T23:59:59.010
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011194_01

Start Time:	2011-194T00:00:04.635	Stop Time:	2011-194T23:59:56.593
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011195_01

Start Time:	2011-195T00:00:02.214	Stop Time:	2011-195T23:59:56.047
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011196_01

Start Time:	2011-196T00:00:01.668	Stop Time:	2011-196T23:59:56.500
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011197_01

Start Time:	2011-197T00:00:02.121	Stop Time:	2011-197T23:59:56.954
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011198_01

Start Time:	2011-198T00:00:02.575	Stop Time:	2011-198T23:59:56.408
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011199_01

Start Time:	2011-199T00:00:02.029	Stop Time:	2011-199T23:59:56.862
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011200_01

Start Time:	2011-200T00:00:02.483	Stop Time:	2011-200T23:59:57.315
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011201_01

Start Time:	2011-201T00:00:02.936	Stop Time:	2011-201T23:59:56.769
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011202_01

Start Time:	2011-202T00:00:02.390	Stop Time:	2011-202T23:59:57.223
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011203_01

Start Time:	2011-203T00:00:02.844	Stop Time:	2011-203T23:59:57.677
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011204_01

Start Time:	2011-204T00:00:03.298	Stop Time:	2011-204T23:59:54.038
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011205_01

Start Time:	2011-205T00:00:02.018	Stop Time:	2011-205T23:59:56.706
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011206_01

Start Time:	2011-206T00:00:02.331	Stop Time:	2011-206T23:59:57.160
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011207_01

Start Time:	2011-207T00:00:02.785	Stop Time:	2011-207T23:59:56.614
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011208_01

Start Time:	2011-208T00:00:02.239	Stop Time:	2011-208T23:59:55.317
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011209_01

Start Time:	2011-209T00:00:00.946	Stop Time:	2011-209T23:59:54.771
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011210_01

Start Time:	2011-210T00:00:00.400	Stop Time:	2011-210T23:59:56.725
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011211_01

Start Time:	2011-211T00:00:02.350	Stop Time:	2011-211T23:59:57.179
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011212_01

Start Time:	2011-212T00:00:02.804	Stop Time:	2011-212T23:59:57.632
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011213_01

Start Time:	2011-213T00:00:03.257	Stop Time:	2011-213T23:59:57.086
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011214_01

Start Time:	2011-214T00:00:02.711	Stop Time:	2011-214T23:59:58.669
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011215_01

Start Time:	2011-215T00:00:06.661	Stop Time:	2011-215T23:59:58.369
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011216_01

Start Time:	2011-216T00:00:03.994	Stop Time:	2011-216T23:59:58.822
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011217_01

Start Time:	2011-217T00:00:04.447	Stop Time:	2011-217T23:59:59.276
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011218_01

Start Time:	2011-218T00:00:04.901	Stop Time:	2011-218T23:59:58.730
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011219_01

Start Time:	2011-219T00:00:04.355	Stop Time:	2011-219T23:59:56.152
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011220_01

Start Time:	2011-220T00:00:07.168	Stop Time:	2011-220T23:59:52.403
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011221_01

Start Time:	2011-221T00:00:03.419	Stop Time:	2011-221T23:59:58.919
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011222_01

Start Time:	2011-222T00:00:09.935	Stop Time:	2011-222T22:47:44.557
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011223_01

Start Time:	2011-223T02:08:53.664	Stop Time:	2011-223T23:59:59.374
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011224_01

Start Time:	2011-224T00:00:04.999	Stop Time:	2011-224T19:44:46.674
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011225_01

Start Time:	2011-225T02:08:54.157	Stop Time:	2011-225T16:08:47.210
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011226_01

Start Time:	2011-226T23:16:37.130	Stop Time:	2011-226T23:59:53.282
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011227_01

Start Time:	2011-227T00:00:01.313	Stop Time:	2011-227T23:59:58.782
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011228_01

Start Time:	2011-228T00:00:09.798	Stop Time:	2011-228T23:59:51.236
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011229_01

Start Time:	2011-229T00:00:02.252	Stop Time:	2011-229T23:59:58.502
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011230_01

Start Time:	2011-230T00:00:09.518	Stop Time:	2011-230T23:59:53.865
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011231_01

Start Time:	2011-231T00:00:01.861	Stop Time:	2011-231T23:59:57.088
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011232_01

Start Time:	2011-232T00:00:02.713	Stop Time:	2011-232T23:59:55.291
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011233_01

Start Time:	2011-233T00:00:00.916	Stop Time:	2011-233T23:59:56.495
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011234_01

Start Time:	2011-234T00:00:02.120	Stop Time:	2011-234T23:59:58.948
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011235_01

Start Time:	2011-235T00:00:02.698	Stop Time:	2011-235T18:41:56.647
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011236_01

Start Time:	2011-236T04:42:04.048	Stop Time:	2011-236T23:59:57.355
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011237_01

Start Time:	2011-237T00:00:02.980	Stop Time:	2011-237T23:59:55.933
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011238_01

Start Time:	2011-238T00:00:01.558	Stop Time:	2011-238T23:59:56.387
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011239_01

Start Time:	2011-239T00:00:02.012	Stop Time:	2011-239T23:59:56.840
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011240_01

Start Time:	2011-240T00:00:02.465	Stop Time:	2011-240T23:59:56.293
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011241_01

Start Time:	2011-241T00:00:01.918	Stop Time:	2011-241T23:59:56.747
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011242_01

Start Time:	2011-242T00:00:02.372	Stop Time:	2011-242T23:59:57.200
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011243_01

Start Time:	2011-243T00:00:02.825	Stop Time:	2011-243T23:59:56.654
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011244_01

Start Time:	2011-244T00:00:02.279	Stop Time:	2011-244T23:59:57.107
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011245_01

Start Time:	2011-245T00:00:02.732	Stop Time:	2011-245T23:59:57.560
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011246_01

Start Time:	2011-246T00:00:03.185	Stop Time:	2011-246T23:59:57.014
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011247_01

Start Time:	2011-247T00:00:02.639	Stop Time:	2011-247T23:59:56.592
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011248_01

Start Time:	2011-248T00:00:02.217	Stop Time:	2011-248T23:59:54.546
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011249_01

Start Time:	2011-249T00:00:00.171	Stop Time:	2011-249T23:59:54.999
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011250_01

Start Time:	2011-250T00:00:00.624	Stop Time:	2011-250T23:59:55.453
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011251_01

Start Time:	2011-251T00:00:01.077	Stop Time:	2011-251T23:59:52.148
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011252_01

Start Time:	2011-252T00:00:00.132	Stop Time:	2011-252T23:59:59.801
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011253_01

Start Time:	2011-253T00:00:07.797	Stop Time:	2011-253T23:59:55.552
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011254_01

Start Time:	2011-254T00:00:03.454	Stop Time:	2011-254T23:59:58.267
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011255_01

Start Time:	2011-255T00:00:02.017	Stop Time:	2011-255T23:59:59.721
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011256_01

Start Time:	2011-256T00:00:05.346	Stop Time:	2011-256T23:59:57.424
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011257_01

Start Time:	2011-257T00:00:01.174	Stop Time:	2011-257T23:59:53.604
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011258_01

Start Time:	2011-258T00:00:01.635	Stop Time:	2011-258T23:59:59.456
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011259_01

Start Time:	2011-259T00:00:05.081	Stop Time:	2011-259T23:59:59.909
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011260_01

Start Time:	2011-260T00:00:05.534	Stop Time:	2011-260T23:59:54.738
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011261_01

Start Time:	2011-261T00:00:00.363	Stop Time:	2011-261T23:59:59.816
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011262_01

Start Time:	2011-262T00:00:05.441	Stop Time:	2011-262T23:59:54.645
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011263_01

Start Time:	2011-263T00:00:00.269	Stop Time:	2011-263T23:59:56.692
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011264_01

Start Time:	2011-264T00:00:04.660	Stop Time:	2011-264T23:59:58.301
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011265_01

Start Time:	2011-265T00:00:03.926	Stop Time:	2011-265T23:59:54.759
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011266_01

Start Time:	2011-266T00:00:00.380	Stop Time:	2011-266T23:59:59.833
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011267_01

Start Time:	2011-267T00:00:05.458	Stop Time:	2011-267T23:59:55.412
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011268_01

Start Time:	2011-268T00:00:01.037	Stop Time:	2011-268T23:59:57.240
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011269_01

Start Time:	2011-269T00:00:02.865	Stop Time:	2011-269T23:59:58.443
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011270_01

Start Time:	2011-270T00:00:04.068	Stop Time:	2011-270T23:59:57.147
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011271_01

Start Time:	2011-271T00:00:02.772	Stop Time:	2011-271T23:59:59.100
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011272_01

Start Time:	2011-272T00:00:04.725	Stop Time:	2011-272T23:59:55.679
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011273_01

Start Time:	2011-273T00:00:01.304	Stop Time:	2011-273T23:59:56.882
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011274_01

Start Time:	2011-274T00:00:04.382	Stop Time:	2011-274T23:59:58.336
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011275_01

Start Time:	2011-275T00:00:05.835	Stop Time:	2011-275T23:59:54.289
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011276_01

Start Time:	2011-276T00:00:01.789	Stop Time:	2011-276T23:59:57.746
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011277_01

Start Time:	2011-277T00:00:03.367	Stop Time:	2011-277T23:59:54.446
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011278_01

Start Time:	2011-278T00:00:00.071	Stop Time:	2011-278T23:59:54.899
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011279_01

Start Time:	2011-279T00:00:00.524	Stop Time:	2011-279T23:59:59.978
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011280_01

Start Time:	2011-280T00:00:05.603	Stop Time:	2011-280T23:59:54.806
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011281_01

Start Time:	2011-281T00:00:00.431	Stop Time:	2011-281T23:59:55.260
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011282_01

Start Time:	2011-282T00:00:00.884	Stop Time:	2011-282T23:59:54.705
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011283_01

Start Time:	2011-283T00:00:00.330	Stop Time:	2011-283T23:59:55.159
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011284_01

Start Time:	2011-284T00:00:00.784	Stop Time:	2011-284T23:59:55.612
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011285_01

Start Time:	2011-285T00:00:01.237	Stop Time:	2011-285T23:59:55.065
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011286_01

Start Time:	2011-286T00:00:00.690	Stop Time:	2011-286T23:59:55.519
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011287_01

Start Time:	2011-287T00:00:01.144	Stop Time:	2011-287T23:59:55.972
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011288_01

Start Time:	2011-288T00:00:01.597	Stop Time:	2011-288T23:59:55.425
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011289_01

Start Time:	2011-289T00:00:01.050	Stop Time:	2011-289T23:59:57.629
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011290_01

Start Time:	2011-290T00:00:03.254	Stop Time:	2011-290T23:59:58.582
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011291_01

Start Time:	2011-291T00:00:04.207	Stop Time:	2011-291T23:59:54.539
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011292_01

Start Time:	2011-292T00:00:00.160	Stop Time:	2011-292T23:59:58.067
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011293_01

Start Time:	2011-293T00:00:06.075	Stop Time:	2011-293T23:59:59.567
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011294_01

Start Time:	2011-294T00:00:05.192	Stop Time:	2011-294T23:59:54.395
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011295_01

Start Time:	2011-295T00:00:00.020	Stop Time:	2011-295T23:59:54.849
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011296_01

Start Time:	2011-296T00:00:00.474	Stop Time:	2011-296T23:59:59.927
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011297_01

Start Time:	2011-297T00:00:05.552	Stop Time:	2011-297T23:59:54.755
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011298_01

Start Time:	2011-298T00:00:00.380	Stop Time:	2011-298T23:59:55.209
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011299_01

Start Time:	2011-299T00:00:00.834	Stop Time:	2011-299T23:59:54.662
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011300_01

Start Time:	2011-300T00:00:00.287	Stop Time:	2011-300T23:59:55.115
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011301_01

Start Time:	2011-301T00:00:00.740	Stop Time:	2011-301T23:59:55.569
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011302_01

Start Time:	2011-302T00:00:01.194	Stop Time:	2011-302T23:59:55.022
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011303_01

Start Time:	2011-303T00:00:00.647	Stop Time:	2011-303T23:59:54.601
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011304_01

Start Time:	2011-304T00:00:00.226	Stop Time:	2011-304T23:59:56.178
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011305_01

Start Time:	2011-305T00:00:01.803	Stop Time:	2011-305T23:59:59.131
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011306_01

Start Time:	2011-306T00:00:04.756	Stop Time:	2011-306T23:59:55.085
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011307_01

Start Time:	2011-307T00:00:00.710	Stop Time:	2011-307T23:59:55.038
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011308_01

Start Time:	2011-308T00:00:00.663	Stop Time:	2011-308T23:59:55.491
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011309_01

Start Time:	2011-309T00:00:01.116	Stop Time:	2011-309T23:59:57.945
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011310_01

Start Time:	2011-310T00:00:01.695	Stop Time:	2011-310T23:59:52.929
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011311_01

Start Time:	2011-311T00:00:00.910	Stop Time:	2011-311T23:59:55.304
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011312_01

Start Time:	2011-312T00:00:03.406	Stop Time:	2011-312T23:59:58.180
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011313_01

Start Time:	2011-313T00:00:03.805	Stop Time:	2011-313T23:59:53.465
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011314_01

Start Time:	2011-314T00:00:01.422	Stop Time:	2011-314T23:59:58.336
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011315_01

Start Time:	2011-315T00:00:03.961	Stop Time:	2011-315T23:59:58.665
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011316_01

Start Time:	2011-316T00:00:04.290	Stop Time:	2011-316T23:59:58.118
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011317_01

Start Time:	2011-317T00:00:03.743	Stop Time:	2011-317T23:59:58.720
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011318_01

Start Time:	2011-318T00:00:06.599	Stop Time:	2011-318T23:59:56.400
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011319_01

Start Time:	2011-319T00:00:02.025	Stop Time:	2011-319T23:59:56.853
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011320_01

Start Time:	2011-320T00:00:02.478	Stop Time:	2011-320T23:59:57.307
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011321_01

Start Time:	2011-321T00:00:02.932	Stop Time:	2011-321T23:59:55.635
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011322_01

Start Time:	2011-322T00:00:01.260	Stop Time:	2011-322T23:59:55.088
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011323_01

Start Time:	2011-323T00:00:00.713	Stop Time:	2011-323T23:59:59.667
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011324_01

Start Time:	2011-324T00:00:05.292	Stop Time:	2011-324T23:59:55.620
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011325_01

Start Time:	2011-325T00:00:01.245	Stop Time:	2011-325T23:59:56.073
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011326_01

Start Time:	2011-326T00:00:01.698	Stop Time:	2011-326T23:59:56.027
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011327_01

Start Time:	2011-327T00:00:01.652	Stop Time:	2011-327T23:59:56.480
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011328_01

Start Time:	2011-328T00:00:02.105	Stop Time:	2011-328T23:59:58.808
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011329_01

Start Time:	2011-329T00:00:04.433	Stop Time:	2011-329T23:59:59.262
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011330_01

Start Time:	2011-330T00:00:04.887	Stop Time:	2011-330T23:59:59.715
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011331_01

Start Time:	2011-331T00:00:05.340	Stop Time:	2011-331T23:59:58.294
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011332_01

Start Time:	2011-332T00:00:03.918	Stop Time:	2011-332T23:59:56.747
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011333_01

Start Time:	2011-333T00:00:02.372	Stop Time:	2011-333T23:59:57.200
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011334_01

Start Time:	2011-334T00:00:02.825	Stop Time:	2011-334T23:59:53.267
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011335_01

Start Time:	2011-335T00:00:01.314	Stop Time:	2011-335T23:59:55.357
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011336_01

Start Time:	2011-336T00:00:00.982	Stop Time:	2011-336T23:59:59.935
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011337_01

Start Time:	2011-337T00:00:05.560	Stop Time:	2011-337T23:59:54.764
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011338_01

Start Time:	2011-338T00:00:00.389	Stop Time:	2011-338T23:59:55.217
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011339_01

Start Time:	2011-339T00:00:00.842	Stop Time:	2011-339T23:59:54.670
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011340_01

Start Time:	2011-340T00:00:00.295	Stop Time:	2011-340T23:59:55.124
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011341_01

Start Time:	2011-341T00:00:00.749	Stop Time:	2011-341T23:59:55.577
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011342_01

Start Time:	2011-342T00:00:01.202	Stop Time:	2011-342T23:59:55.031
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011343_01

Start Time:	2011-343T00:00:00.656	Stop Time:	2011-343T23:59:55.484
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011344_01

Start Time:	2011-344T00:00:01.109	Stop Time:	2011-344T23:59:55.937
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011345_01

Start Time:	2011-345T00:00:01.562	Stop Time:	2011-345T23:59:58.266
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011346_01

Start Time:	2011-346T00:00:02.016	Stop Time:	2011-346T23:59:58.719
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011347_01

Start Time:	2011-347T00:00:04.344	Stop Time:	2011-347T23:59:56.422
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011348_01

Start Time:	2011-348T00:00:02.047	Stop Time:	2011-348T23:59:56.302
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011349_01

Start Time:	2011-349T00:00:04.298	Stop Time:	2011-349T23:59:59.954
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011350_01

Start Time:	2011-350T00:00:05.579	Stop Time:	2011-350T23:59:54.782
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011351_01

Start Time:	2011-351T00:00:00.407	Stop Time:	2011-351T23:59:59.360
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011352_01

Start Time:	2011-352T00:00:04.985	Stop Time:	2011-352T23:59:56.563
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011353_01

Start Time:	2011-353T00:00:02.192	Stop Time:	2011-353T23:59:59.142
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011354_01

Start Time:	2011-354T00:00:04.767	Stop Time:	2011-354T23:59:58.345
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011355_01

Start Time:	2011-355T00:00:03.970	Stop Time:	2011-355T23:59:54.673
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011356_01

Start Time:	2011-356T00:00:00.298	Stop Time:	2011-356T23:59:59.627
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011357_01

Start Time:	2011-357T00:00:05.252	Stop Time:	2011-357T22:39:03.861
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011358_01

Start Time:	2011-358T00:39:11.444	Stop Time:	2011-358T01:03:03.806
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011359_01

Start Time:	2011-359T08:39:11.715	Stop Time:	2011-359T23:59:59.112
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011360_01

Start Time:	2011-360T00:00:04.737	Stop Time:	2011-360T23:59:59.565
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011361_01

Start Time:	2011-361T00:00:05.190	Stop Time:	2011-361T23:59:59.018
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011362_01

Start Time:	2011-362T00:00:04.643	Stop Time:	2011-362T23:59:59.472
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011363_01

Start Time:	2011-363T00:00:05.097	Stop Time:	2011-363T23:59:59.925
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011364_01

Start Time:	2011-364T00:00:05.550	Stop Time:	2011-364T23:59:59.379
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2011365_01

Start Time:	2011-365T00:00:05.004	Stop Time:	2011-365T23:59:59.832
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in