PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LACCFULL0/ 2006 /

LACCFULL0_2006001_01

Start Time:	2006-001T00:00:02.226	Stop Time:	2006-001T23:59:55.797
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006002_01

Start Time:	2006-002T00:00:01.422	Stop Time:	2006-002T23:59:57.368
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006003_01

Start Time:	2006-003T00:00:02.993	Stop Time:	2006-003T23:59:57.814
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006004_01

Start Time:	2006-004T00:00:03.439	Stop Time:	2006-004T23:59:57.260
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006005_01

Start Time:	2006-005T00:00:02.885	Stop Time:	2006-005T23:59:58.581
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006006_01

Start Time:	2006-006T00:00:04.206	Stop Time:	2006-006T20:22:56.236
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006007_01

Start Time:	2006-007T02:12:59.730	Stop Time:	2006-007T23:59:58.473
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006008_01

Start Time:	2006-008T00:00:02.223	Stop Time:	2006-008T23:59:59.775
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006009_01

Start Time:	2006-009T00:00:06.118	Stop Time:	2006-009T23:59:59.303
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006010_01

Start Time:	2006-010T00:00:03.990	Stop Time:	2006-010T23:59:58.358
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006011_01

Start Time:	2006-011T00:00:08.436	Stop Time:	2006-011T23:59:59.257
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006012_01

Start Time:	2006-012T00:00:03.011	Stop Time:	2006-012T23:59:58.048
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006013_01

Start Time:	2006-013T00:00:01.173	Stop Time:	2006-013T23:59:57.372
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006014_01

Start Time:	2006-014T00:00:00.497	Stop Time:	2006-014T23:59:56.571
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006015_01

Start Time:	2006-015T00:00:02.196	Stop Time:	2006-015T23:59:56.020
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006016_01

Start Time:	2006-016T00:00:01.645	Stop Time:	2006-016T23:59:58.094
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006017_01

Start Time:	2006-017T00:00:01.219	Stop Time:	2006-017T23:59:57.293
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006018_01

Start Time:	2006-018T00:00:01.043	Stop Time:	2006-018T23:59:58.867
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006019_01

Start Time:	2006-019T00:00:01.992	Stop Time:	2006-019T23:59:58.191
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006020_01

Start Time:	2006-020T00:00:01.316	Stop Time:	2006-020T23:59:59.390
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006021_01

Start Time:	2006-021T00:00:03.140	Stop Time:	2006-021T23:59:53.826
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006022_01

Start Time:	2006-022T00:00:00.138	Stop Time:	2006-022T23:59:57.162
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006023_01

Start Time:	2006-023T00:00:02.786	Stop Time:	2006-023T23:59:59.360
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006024_01

Start Time:	2006-024T00:00:04.985	Stop Time:	2006-024T23:59:58.434
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006025_01

Start Time:	2006-025T00:00:02.184	Stop Time:	2006-025T23:59:59.883
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006026_01

Start Time:	2006-026T00:00:03.633	Stop Time:	2006-026T23:59:59.832
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006027_01

Start Time:	2006-027T00:00:02.957	Stop Time:	2006-027T23:59:54.656
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006028_01

Start Time:	2006-028T00:00:00.281	Stop Time:	2006-028T23:59:56.230
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006029_01

Start Time:	2006-029T00:00:01.855	Stop Time:	2006-029T23:59:55.054
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006030_01

Start Time:	2006-030T00:00:00.679	Stop Time:	2006-030T23:59:58.128
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006031_01

Start Time:	2006-031T00:00:03.753	Stop Time:	2006-031T23:59:58.448
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006032_01

Start Time:	2006-032T00:00:04.788	Stop Time:	2006-032T23:59:59.151
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006033_01

Start Time:	2006-033T00:00:04.776	Stop Time:	2006-033T23:59:58.600
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006034_01

Start Time:	2006-034T00:00:04.225	Stop Time:	2006-034T23:59:59.049
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006035_01

Start Time:	2006-035T00:00:04.674	Stop Time:	2006-035T23:59:58.248
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006036_01

Start Time:	2006-036T00:00:03.873	Stop Time:	2006-036T23:59:58.662
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006037_01

Start Time:	2006-037T00:00:04.994	Stop Time:	2006-037T23:59:54.896
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006038_01

Start Time:	2006-038T00:00:00.521	Stop Time:	2006-038T23:59:55.845
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006039_01

Start Time:	2006-039T00:00:01.470	Stop Time:	2006-039T23:59:56.294
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006040_01

Start Time:	2006-040T00:00:01.919	Stop Time:	2006-040T23:59:59.743
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006041_01

Start Time:	2006-041T00:00:05.368	Stop Time:	2006-041T23:59:59.192
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006042_01

Start Time:	2006-042T00:00:02.317	Stop Time:	2006-042T23:59:57.516
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006043_01

Start Time:	2006-043T00:00:03.141	Stop Time:	2006-043T23:59:57.590
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006044_01

Start Time:	2006-044T00:00:00.715	Stop Time:	2006-044T23:59:56.914
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006045_01

Start Time:	2006-045T00:00:00.039	Stop Time:	2006-045T23:59:59.363
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006046_01

Start Time:	2006-046T00:00:02.488	Stop Time:	2006-046T23:59:59.999
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006047_01

Start Time:	2006-047T00:00:06.238	Stop Time:	2006-047T23:59:57.886
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006048_01

Start Time:	2006-048T00:00:03.511	Stop Time:	2006-048T23:59:59.085
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006049_01

Start Time:	2006-049T00:00:04.710	Stop Time:	2006-049T23:59:58.284
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006050_01

Start Time:	2006-050T00:00:03.909	Stop Time:	2006-050T23:59:57.358
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006051_01

Start Time:	2006-051T00:00:00.483	Stop Time:	2006-051T23:59:58.463
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006052_01

Start Time:	2006-052T00:00:04.771	Stop Time:	2006-052T23:59:59.131
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006053_01

Start Time:	2006-053T00:00:04.756	Stop Time:	2006-053T23:59:54.580
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006054_01

Start Time:	2006-054T00:00:00.205	Stop Time:	2006-054T23:59:54.654
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006055_01

Start Time:	2006-055T00:00:00.278	Stop Time:	2006-055T23:59:58.102
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006056_01

Start Time:	2006-056T00:00:01.227	Stop Time:	2006-056T23:59:59.782
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006057_01

Start Time:	2006-057T00:00:10.965	Stop Time:	2006-057T23:59:59.250
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006058_01

Start Time:	2006-058T00:00:04.875	Stop Time:	2006-058T23:59:54.699
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006059_01

Start Time:	2006-059T00:00:00.324	Stop Time:	2006-059T23:59:59.023
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006060_01

Start Time:	2006-060T00:00:02.148	Stop Time:	2006-060T23:59:58.472
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006061_01

Start Time:	2006-061T00:00:01.597	Stop Time:	2006-061T23:59:54.968
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006062_01

Start Time:	2006-062T00:00:01.308	Stop Time:	2006-062T23:59:55.745
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006063_01

Start Time:	2006-063T00:00:01.370	Stop Time:	2006-063T23:59:57.694
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006064_01

Start Time:	2006-064T00:00:03.319	Stop Time:	2006-064T23:59:59.643
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006065_01

Start Time:	2006-065T00:00:05.268	Stop Time:	2006-065T23:59:57.217
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006066_01

Start Time:	2006-066T00:00:00.346	Stop Time:	2006-066T23:59:55.900
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006067_01

Start Time:	2006-067T00:00:02.201	Stop Time:	2006-067T23:59:59.990
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006068_01

Start Time:	2006-068T00:00:03.115	Stop Time:	2006-068T23:59:55.981
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006069_01

Start Time:	2006-069T00:00:02.231	Stop Time:	2006-069T23:59:57.141
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006070_01

Start Time:	2006-070T00:00:01.824	Stop Time:	2006-070T23:59:58.078
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006071_01

Start Time:	2006-071T00:00:04.398	Stop Time:	2006-071T23:59:56.160
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006072_01

Start Time:	2006-072T00:00:01.785	Stop Time:	2006-072T23:59:59.859
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006073_01

Start Time:	2006-073T00:00:06.175	Stop Time:	2006-073T23:59:58.363
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006074_01

Start Time:	2006-074T00:00:01.488	Stop Time:	2006-074T23:59:56.313
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006075_01

Start Time:	2006-075T00:00:01.938	Stop Time:	2006-075T23:59:56.762
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006076_01

Start Time:	2006-076T00:00:02.387	Stop Time:	2006-076T23:59:57.942
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006077_01

Start Time:	2006-077T00:00:04.220	Stop Time:	2006-077T23:59:58.411
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006078_01

Start Time:	2006-078T00:00:01.536	Stop Time:	2006-078T23:59:58.861
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006079_01

Start Time:	2006-079T00:00:04.486	Stop Time:	2006-079T23:59:58.435
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006080_01

Start Time:	2006-080T00:00:01.560	Stop Time:	2006-080T23:59:59.260
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006081_01

Start Time:	2006-081T00:00:03.947	Stop Time:	2006-081T23:59:57.413
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006082_01

Start Time:	2006-082T00:00:03.674	Stop Time:	2006-082T23:59:57.409
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006083_01

Start Time:	2006-083T00:00:00.534	Stop Time:	2006-083T23:59:57.488
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006084_01

Start Time:	2006-084T00:00:03.804	Stop Time:	2006-084T23:59:55.695
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006085_01

Start Time:	2006-085T00:00:02.039	Stop Time:	2006-085T23:59:55.711
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006086_01

Start Time:	2006-086T00:00:01.933	Stop Time:	2006-086T23:59:55.059
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006087_01

Start Time:	2006-087T00:00:01.352	Stop Time:	2006-087T23:59:59.411
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006088_01

Start Time:	2006-088T00:00:05.727	Stop Time:	2006-088T23:59:57.356
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006089_01

Start Time:	2006-089T00:00:00.481	Stop Time:	2006-089T23:59:59.993
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006090_01

Start Time:	2006-090T00:00:06.310	Stop Time:	2006-090T23:59:58.755
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006091_01

Start Time:	2006-091T00:00:01.880	Stop Time:	2006-091T23:59:58.084
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006092_01

Start Time:	2006-092T00:00:01.205	Stop Time:	2006-092T23:59:58.377
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006093_01

Start Time:	2006-093T00:00:04.615	Stop Time:	2006-093T23:59:57.104
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006094_01

Start Time:	2006-094T00:00:00.229	Stop Time:	2006-094T23:59:59.554
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006095_01

Start Time:	2006-095T00:00:02.679	Stop Time:	2006-095T23:59:55.007
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006096_01

Start Time:	2006-096T00:00:01.323	Stop Time:	2006-096T23:59:59.531
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006097_01

Start Time:	2006-097T00:00:05.882	Stop Time:	2006-097T23:59:53.683
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006098_01

Start Time:	2006-098T00:00:00.000	Stop Time:	2006-098T23:59:59.477
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006099_01

Start Time:	2006-099T00:00:02.602	Stop Time:	2006-099T23:59:58.680
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006100_01

Start Time:	2006-100T00:00:01.801	Stop Time:	2006-100T23:59:58.001
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006101_01

Start Time:	2006-101T00:00:01.130	Stop Time:	2006-101T23:59:54.450
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006102_01

Start Time:	2006-102T00:00:00.075	Stop Time:	2006-102T23:59:59.775
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006103_01

Start Time:	2006-103T00:00:07.029	Stop Time:	2006-103T23:59:54.849
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006104_01

Start Time:	2006-104T00:00:00.474	Stop Time:	2006-104T23:59:57.736
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006105_01

Start Time:	2006-105T00:00:04.053	Stop Time:	2006-105T23:59:56.612
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006106_01

Start Time:	2006-106T00:00:02.924	Stop Time:	2006-106T23:59:59.573
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006107_01

Start Time:	2006-107T00:00:05.198	Stop Time:	2006-107T23:59:54.398
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006108_01

Start Time:	2006-108T00:00:00.022	Stop Time:	2006-108T23:59:59.472
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006109_01

Start Time:	2006-109T00:00:05.097	Stop Time:	2006-109T22:57:32.715
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006110_01

Start Time:	2006-110T00:18:21.168	Stop Time:	2006-110T23:59:55.625
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006111_01

Start Time:	2006-111T00:00:01.246	Stop Time:	2006-111T23:59:55.075
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006112_01

Start Time:	2006-112T00:00:00.696	Stop Time:	2006-112T23:59:56.524
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006113_01

Start Time:	2006-113T00:00:01.208	Stop Time:	2006-113T23:59:55.962
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006114_01

Start Time:	2006-114T00:00:02.247	Stop Time:	2006-114T23:59:58.919
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006115_01

Start Time:	2006-115T00:00:04.544	Stop Time:	2006-115T23:59:51.271
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006116_01

Start Time:	2006-116T00:00:02.455	Stop Time:	2006-116T23:59:55.443
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006117_01

Start Time:	2006-117T00:00:01.068	Stop Time:	2006-117T23:59:58.768
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006118_01

Start Time:	2006-118T00:00:02.518	Stop Time:	2006-118T23:59:57.467
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006119_01

Start Time:	2006-119T00:00:00.592	Stop Time:	2006-119T23:59:58.918
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006120_01

Start Time:	2006-120T00:00:03.605	Stop Time:	2006-120T23:59:56.617
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006121_01

Start Time:	2006-121T00:00:00.367	Stop Time:	2006-121T19:15:37.055
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006122_01

Start Time:	2006-122T19:36:19.121	Stop Time:	2006-122T23:59:55.020
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006123_01

Start Time:	2006-123T00:00:01.329	Stop Time:	2006-123T23:59:54.255
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006124_01

Start Time:	2006-124T00:00:00.599	Stop Time:	2006-124T23:59:55.939
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006125_01

Start Time:	2006-125T00:00:02.247	Stop Time:	2006-125T23:59:54.318
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006126_01

Start Time:	2006-126T00:00:00.638	Stop Time:	2006-126T23:59:57.815
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006127_01

Start Time:	2006-127T00:00:00.940	Stop Time:	2006-127T23:59:53.940
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006128_01

Start Time:	2006-128T00:00:00.272	Stop Time:	2006-128T23:59:57.214
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006129_01

Start Time:	2006-129T00:00:00.339	Stop Time:	2006-129T23:59:59.753
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006130_01

Start Time:	2006-130T00:00:06.069	Stop Time:	2006-130T23:59:58.386
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006131_01

Start Time:	2006-131T00:00:04.640	Stop Time:	2006-131T23:59:58.281
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006132_01

Start Time:	2006-132T00:00:04.558	Stop Time:	2006-132T23:59:57.637
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006133_01

Start Time:	2006-133T00:00:00.762	Stop Time:	2006-133T23:59:58.465
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006134_01

Start Time:	2006-134T00:00:04.817	Stop Time:	2006-134T23:59:59.786
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006135_01

Start Time:	2006-135T00:00:02.911	Stop Time:	2006-135T23:59:56.614
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006136_01

Start Time:	2006-136T00:00:02.962	Stop Time:	2006-136T23:59:58.083
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006137_01

Start Time:	2006-137T00:00:04.360	Stop Time:	2006-137T23:59:57.884
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006138_01

Start Time:	2006-138T00:00:03.509	Stop Time:	2006-138T23:59:58.334
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006139_01

Start Time:	2006-139T00:00:03.959	Stop Time:	2006-139T23:59:58.783
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006140_01

Start Time:	2006-140T00:00:04.408	Stop Time:	2006-140T23:59:59.233
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006141_01

Start Time:	2006-141T00:00:04.858	Stop Time:	2006-141T23:59:59.682
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006142_01

Start Time:	2006-142T00:00:02.807	Stop Time:	2006-142T23:59:55.011
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006143_01

Start Time:	2006-143T00:00:01.245	Stop Time:	2006-143T23:59:55.081
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006144_01

Start Time:	2006-144T00:00:00.706	Stop Time:	2006-144T23:59:54.824
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006145_01

Start Time:	2006-145T00:00:00.910	Stop Time:	2006-145T23:59:58.801
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006146_01

Start Time:	2006-146T00:00:05.117	Stop Time:	2006-146T23:59:57.633
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006147_01

Start Time:	2006-147T00:00:03.895	Stop Time:	2006-147T23:59:58.989
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006148_01

Start Time:	2006-148T00:00:05.356	Stop Time:	2006-148T23:59:57.294
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006149_01

Start Time:	2006-149T00:00:03.587	Stop Time:	2006-149T23:59:57.653
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006150_01

Start Time:	2006-150T00:00:00.778	Stop Time:	2006-150T23:59:56.955
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006151_01

Start Time:	2006-151T00:00:03.306	Stop Time:	2006-151T23:59:56.763
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006152_01

Start Time:	2006-152T00:00:03.049	Stop Time:	2006-152T23:59:58.814
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006153_01

Start Time:	2006-153T00:00:05.123	Stop Time:	2006-153T23:59:59.202
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006154_01

Start Time:	2006-154T00:00:02.326	Stop Time:	2006-154T23:59:57.901
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006155_01

Start Time:	2006-155T00:00:01.026	Stop Time:	2006-155T23:59:58.784
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006156_01

Start Time:	2006-156T00:00:05.151	Stop Time:	2006-156T23:59:56.230
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006157_01

Start Time:	2006-157T00:00:02.538	Stop Time:	2006-157T23:59:57.511
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006158_01

Start Time:	2006-158T00:00:03.753	Stop Time:	2006-158T23:59:59.199
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006159_01

Start Time:	2006-159T00:00:02.324	Stop Time:	2006-159T23:59:57.906
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006160_01

Start Time:	2006-160T00:00:04.231	Stop Time:	2006-160T23:59:54.622
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006161_01

Start Time:	2006-161T00:00:01.016	Stop Time:	2006-161T23:59:54.884
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006162_01

Start Time:	2006-162T00:00:01.216	Stop Time:	2006-162T17:31:42.021
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006163_01

Start Time:	2006-163T00:29:16.990	Stop Time:	2006-163T23:59:57.697
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006164_01

Start Time:	2006-164T00:00:00.822	Stop Time:	2006-164T23:59:54.951
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006165_01

Start Time:	2006-165T00:00:01.244	Stop Time:	2006-165T23:59:53.998
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006166_01

Start Time:	2006-166T00:00:00.326	Stop Time:	2006-166T23:59:55.018
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006167_01

Start Time:	2006-167T00:00:01.338	Stop Time:	2006-167T23:59:57.870
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006168_01

Start Time:	2006-168T00:00:00.995	Stop Time:	2006-168T23:59:55.574
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006169_01

Start Time:	2006-169T00:00:03.863	Stop Time:	2006-169T23:59:56.778
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006170_01

Start Time:	2006-170T00:00:04.957	Stop Time:	2006-170T23:59:58.598
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006171_01

Start Time:	2006-171T00:00:06.750	Stop Time:	2006-171T23:59:54.048
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006172_01

Start Time:	2006-172T00:00:02.255	Stop Time:	2006-172T23:59:59.868
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006173_01

Start Time:	2006-173T00:00:02.993	Stop Time:	2006-173T23:59:53.638
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006174_01

Start Time:	2006-174T00:00:01.904	Stop Time:	2006-174T23:59:52.740
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006175_01

Start Time:	2006-175T00:00:00.830	Stop Time:	2006-175T23:59:59.678
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006176_01

Start Time:	2006-176T00:00:07.912	Stop Time:	2006-176T23:59:59.655
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006177_01

Start Time:	2006-177T00:00:07.850	Stop Time:	2006-177T23:59:51.866
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006178_01

Start Time:	2006-178T00:00:00.104	Stop Time:	2006-178T23:59:57.987
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006179_01

Start Time:	2006-179T00:00:06.100	Stop Time:	2006-179T23:59:57.478
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006180_01

Start Time:	2006-180T00:00:03.103	Stop Time:	2006-180T23:59:58.927
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006181_01

Start Time:	2006-181T00:00:04.552	Stop Time:	2006-181T23:59:56.008
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006182_01

Start Time:	2006-182T00:00:02.309	Stop Time:	2006-182T23:59:54.949
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006183_01

Start Time:	2006-183T00:00:00.574	Stop Time:	2006-183T23:59:57.023
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006184_01

Start Time:	2006-184T00:00:02.648	Stop Time:	2006-184T23:59:56.972
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006185_01

Start Time:	2006-185T00:00:00.097	Stop Time:	2006-185T23:59:55.385
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006186_01

Start Time:	2006-186T00:00:03.565	Stop Time:	2006-186T23:59:57.119
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006187_01

Start Time:	2006-187T00:00:00.244	Stop Time:	2006-187T23:59:59.626
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006188_01

Start Time:	2006-188T00:00:07.196	Stop Time:	2006-188T23:59:54.071
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006189_01

Start Time:	2006-189T00:00:01.887	Stop Time:	2006-189T23:59:58.965
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006190_01

Start Time:	2006-190T00:00:02.090	Stop Time:	2006-190T23:59:57.913
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006191_01

Start Time:	2006-191T00:00:01.038	Stop Time:	2006-191T23:59:48.991
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006192_01

Start Time:	2006-192T00:00:00.174	Stop Time:	2006-192T23:59:49.283
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006193_01

Start Time:	2006-193T00:00:00.467	Stop Time:	2006-193T23:59:58.259
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006194_01

Start Time:	2006-194T00:00:01.384	Stop Time:	2006-194T23:59:57.083
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006195_01

Start Time:	2006-195T00:00:00.208	Stop Time:	2006-195T23:59:59.531
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006196_01

Start Time:	2006-196T00:00:02.656	Stop Time:	2006-196T23:59:59.855
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006197_01

Start Time:	2006-197T00:00:02.980	Stop Time:	2006-197T23:59:59.929
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006198_01

Start Time:	2006-198T00:00:03.054	Stop Time:	2006-198T23:59:58.752
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006199_01

Start Time:	2006-199T00:00:01.877	Stop Time:	2006-199T23:59:57.701
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006200_01

Start Time:	2006-200T00:00:00.826	Stop Time:	2006-200T23:59:55.383
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006201_01

Start Time:	2006-201T00:00:01.008	Stop Time:	2006-201T23:59:55.831
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006202_01

Start Time:	2006-202T00:00:01.460	Stop Time:	2006-202T23:59:57.530
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006203_01

Start Time:	2006-203T00:00:00.655	Stop Time:	2006-203T23:59:54.603
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006204_01

Start Time:	2006-204T00:00:00.228	Stop Time:	2006-204T23:59:55.428
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006205_01

Start Time:	2006-205T00:00:01.053	Stop Time:	2006-205T23:59:58.126
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006206_01

Start Time:	2006-206T00:00:02.813	Stop Time:	2006-206T23:59:57.512
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006207_01

Start Time:	2006-207T00:00:02.199	Stop Time:	2006-207T23:59:57.523
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006208_01

Start Time:	2006-208T00:00:02.210	Stop Time:	2006-208T23:59:55.721
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006209_01

Start Time:	2006-209T00:00:00.409	Stop Time:	2006-209T23:59:56.170
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006210_01

Start Time:	2006-210T00:00:00.857	Stop Time:	2006-210T23:59:57.556
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006211_01

Start Time:	2006-211T00:00:02.243	Stop Time:	2006-211T23:59:57.379
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006212_01

Start Time:	2006-212T00:00:02.066	Stop Time:	2006-212T23:59:57.765
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006213_01

Start Time:	2006-213T00:00:03.394	Stop Time:	2006-213T23:59:59.838
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006214_01

Start Time:	2006-214T00:00:02.963	Stop Time:	2006-214T23:59:57.662
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006215_01

Start Time:	2006-215T00:00:03.287	Stop Time:	2006-215T23:59:54.372
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006216_01

Start Time:	2006-216T00:00:00.688	Stop Time:	2006-216T23:59:57.070
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006217_01

Start Time:	2006-217T00:00:03.340	Stop Time:	2006-217T23:59:21.132
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006218_01

Start Time:	2006-218T00:26:13.626	Stop Time:	2006-218T23:59:53.752
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006219_01

Start Time:	2006-219T00:00:00.084	Stop Time:	2006-219T23:59:57.802
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006220_01

Start Time:	2006-220T00:00:04.118	Stop Time:	2006-220T23:59:57.082
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006221_01

Start Time:	2006-221T00:00:03.375	Stop Time:	2006-221T23:59:55.769
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006222_01

Start Time:	2006-222T00:00:02.113	Stop Time:	2006-222T23:59:55.874
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006223_01

Start Time:	2006-223T00:00:01.499	Stop Time:	2006-223T23:59:55.322
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006224_01

Start Time:	2006-224T00:00:00.947	Stop Time:	2006-224T23:59:57.021
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006225_01

Start Time:	2006-225T00:00:00.146	Stop Time:	2006-225T23:59:59.719
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006226_01

Start Time:	2006-226T00:00:02.844	Stop Time:	2006-226T23:59:58.355
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006227_01

Start Time:	2006-227T00:00:01.542	Stop Time:	2006-227T23:59:57.116
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006228_01

Start Time:	2006-228T00:00:00.866	Stop Time:	2006-228T23:59:57.564
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006229_01

Start Time:	2006-229T00:00:01.314	Stop Time:	2006-229T23:59:56.013
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006230_01

Start Time:	2006-230T00:00:01.638	Stop Time:	2006-230T23:59:57.711
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006231_01

Start Time:	2006-231T00:00:03.336	Stop Time:	2006-231T23:59:57.913
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006232_01

Start Time:	2006-232T00:00:01.034	Stop Time:	2006-232T23:59:59.983
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006233_01

Start Time:	2006-233T00:00:03.108	Stop Time:	2006-233T23:59:58.556
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006234_01

Start Time:	2006-234T00:00:01.681	Stop Time:	2006-234T23:59:53.364
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006235_01

Start Time:	2006-235T00:00:04.548	Stop Time:	2006-235T23:59:57.203
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006236_01

Start Time:	2006-236T00:00:00.328	Stop Time:	2006-236T23:59:58.401
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006237_01

Start Time:	2006-237T00:00:01.526	Stop Time:	2006-237T23:59:59.225
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006238_01

Start Time:	2006-238T00:00:02.350	Stop Time:	2006-238T23:59:58.548
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006239_01

Start Time:	2006-239T00:00:01.673	Stop Time:	2006-239T23:59:57.715
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006240_01

Start Time:	2006-240T00:00:08.899	Stop Time:	2006-240T23:59:57.820
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006241_01

Start Time:	2006-241T00:00:00.949	Stop Time:	2006-241T23:59:58.644
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006242_01

Start Time:	2006-242T00:00:01.768	Stop Time:	2006-242T23:59:57.967
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006243_01

Start Time:	2006-243T00:00:01.092	Stop Time:	2006-243T23:59:56.915
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006244_01

Start Time:	2006-244T00:00:00.040	Stop Time:	2006-244T23:59:57.864
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006245_01

Start Time:	2006-245T00:00:00.989	Stop Time:	2006-245T23:59:58.937
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006246_01

Start Time:	2006-246T00:00:02.062	Stop Time:	2006-246T23:59:57.386
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006247_01

Start Time:	2006-247T00:00:00.511	Stop Time:	2006-247T23:59:57.073
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006248_01

Start Time:	2006-248T00:00:00.194	Stop Time:	2006-248T23:59:59.017
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006249_01

Start Time:	2006-249T00:00:02.142	Stop Time:	2006-249T23:59:59.591
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006250_01

Start Time:	2006-250T00:00:05.215	Stop Time:	2006-250T23:59:56.289
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006251_01

Start Time:	2006-251T00:00:01.914	Stop Time:	2006-251T23:59:56.237
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006252_01

Start Time:	2006-252T00:00:01.862	Stop Time:	2006-252T23:59:59.561
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006253_01

Start Time:	2006-253T00:00:05.186	Stop Time:	2006-253T23:59:56.763
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006254_01

Start Time:	2006-254T00:00:02.384	Stop Time:	2006-254T23:59:55.082
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006255_01

Start Time:	2006-255T00:00:00.707	Stop Time:	2006-255T23:59:59.530
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006256_01

Start Time:	2006-256T00:00:02.655	Stop Time:	2006-256T23:59:57.103
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006257_01

Start Time:	2006-257T00:00:00.853	Stop Time:	2006-257T23:59:55.555
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006258_01

Start Time:	2006-258T00:00:01.177	Stop Time:	2006-258T23:59:56.004
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006259_01

Start Time:	2006-259T00:00:01.625	Stop Time:	2006-259T23:59:55.452
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006260_01

Start Time:	2006-260T00:00:01.073	Stop Time:	2006-260T23:59:57.646
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006261_01

Start Time:	2006-261T00:00:00.771	Stop Time:	2006-261T23:59:59.348
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006262_01

Start Time:	2006-262T00:00:02.469	Stop Time:	2006-262T23:59:57.042
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006263_01

Start Time:	2006-263T00:00:00.167	Stop Time:	2006-263T23:59:59.002
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006264_01

Start Time:	2006-264T00:00:01.814	Stop Time:	2006-264T23:59:59.763
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006265_01

Start Time:	2006-265T00:00:02.575	Stop Time:	2006-265T23:59:57.649
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006266_01

Start Time:	2006-266T00:00:00.461	Stop Time:	2006-266T23:59:58.097
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006267_01

Start Time:	2006-267T00:00:03.722	Stop Time:	2006-267T23:59:56.421
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006268_01

Start Time:	2006-268T00:00:02.050	Stop Time:	2006-268T23:59:55.370
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006269_01

Start Time:	2006-269T00:00:00.995	Stop Time:	2006-269T23:59:54.943
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006270_01

Start Time:	2006-270T00:00:00.568	Stop Time:	2006-270T23:59:59.392
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006271_01

Start Time:	2006-271T00:00:05.017	Stop Time:	2006-271T23:59:55.090
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006272_01

Start Time:	2006-272T00:00:00.715	Stop Time:	2006-272T23:59:58.101
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006273_01

Start Time:	2006-273T00:00:00.914	Stop Time:	2006-273T23:59:58.488
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006274_01

Start Time:	2006-274T00:00:01.300	Stop Time:	2006-274T23:59:58.311
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006275_01

Start Time:	2006-275T00:00:01.124	Stop Time:	2006-275T23:59:57.697
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006276_01

Start Time:	2006-276T00:00:00.510	Stop Time:	2006-276T23:59:58.833
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006277_01

Start Time:	2006-277T00:00:01.646	Stop Time:	2006-277T23:59:59.536
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006278_01

Start Time:	2006-278T00:00:02.344	Stop Time:	2006-278T23:59:54.383
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006279_01

Start Time:	2006-279T00:00:05.566	Stop Time:	2006-279T23:59:58.992
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006280_01

Start Time:	2006-280T00:00:01.804	Stop Time:	2006-280T23:59:58.565
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006281_01

Start Time:	2006-281T00:00:01.378	Stop Time:	2006-281T23:59:58.076
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006282_01

Start Time:	2006-282T00:00:03.701	Stop Time:	2006-282T23:59:58.525
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006283_01

Start Time:	2006-283T00:00:04.150	Stop Time:	2006-283T23:59:59.161
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006284_01

Start Time:	2006-284T00:00:01.973	Stop Time:	2006-284T23:59:56.922
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006285_01

Start Time:	2006-285T00:00:00.672	Stop Time:	2006-285T23:59:59.371
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006286_01

Start Time:	2006-286T00:00:03.120	Stop Time:	2006-286T23:06:41.965
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006287_01

Start Time:	2006-287T09:54:49.345	Stop Time:	2006-287T23:59:58.143
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006288_01

Start Time:	2006-288T00:00:03.768	Stop Time:	2006-288T23:59:57.841
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006289_01

Start Time:	2006-289T00:00:03.470	Stop Time:	2006-289T23:59:58.540
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006290_01

Start Time:	2006-290T00:00:04.165	Stop Time:	2006-290T23:59:57.738
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006291_01

Start Time:	2006-291T00:00:03.363	Stop Time:	2006-291T23:59:57.312
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006292_01

Start Time:	2006-292T00:00:02.937	Stop Time:	2006-292T23:59:58.761
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006293_01

Start Time:	2006-293T00:00:01.573	Stop Time:	2006-293T23:59:58.272
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006294_01

Start Time:	2006-294T00:00:01.084	Stop Time:	2006-294T23:59:58.345
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006295_01

Start Time:	2006-295T00:00:01.162	Stop Time:	2006-295T23:59:57.106
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006296_01

Start Time:	2006-296T00:00:00.856	Stop Time:	2006-296T23:59:59.753
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006297_01

Start Time:	2006-297T00:00:02.565	Stop Time:	2006-297T23:59:59.389
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006298_01

Start Time:	2006-298T00:00:05.014	Stop Time:	2006-298T23:59:58.963
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006299_01

Start Time:	2006-299T00:00:02.713	Stop Time:	2006-299T23:59:59.286
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006300_01

Start Time:	2006-300T00:00:02.099	Stop Time:	2006-300T23:59:56.610
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006301_01

Start Time:	2006-301T00:00:00.360	Stop Time:	2006-301T23:59:58.058
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006302_01

Start Time:	2006-302T00:00:03.683	Stop Time:	2006-302T23:59:58.632
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006303_01

Start Time:	2006-303T00:00:04.257	Stop Time:	2006-303T23:59:59.205
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006304_01

Start Time:	2006-304T00:00:02.955	Stop Time:	2006-304T23:59:59.403
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006305_01

Start Time:	2006-305T00:00:03.153	Stop Time:	2006-305T23:59:58.102
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006306_01

Start Time:	2006-306T00:00:01.852	Stop Time:	2006-306T23:59:59.050
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006307_01

Start Time:	2006-307T00:00:02.800	Stop Time:	2006-307T23:59:56.499
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006308_01

Start Time:	2006-308T00:00:00.249	Stop Time:	2006-308T23:59:56.948
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006309_01

Start Time:	2006-309T00:00:00.697	Stop Time:	2006-309T23:59:57.021
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006310_01

Start Time:	2006-310T00:00:02.646	Stop Time:	2006-310T23:59:57.970
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006311_01

Start Time:	2006-311T00:00:03.595	Stop Time:	2006-311T20:13:17.255
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006312_01

Start Time:	2006-312T00:37:23.783	Stop Time:	2006-312T23:59:59.117
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006313_01

Start Time:	2006-313T00:00:04.742	Stop Time:	2006-313T23:59:58.690
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006314_01

Start Time:	2006-314T00:00:04.315	Stop Time:	2006-314T23:59:58.139
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006315_01

Start Time:	2006-315T00:00:03.764	Stop Time:	2006-315T23:59:58.588
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006316_01

Start Time:	2006-316T00:00:04.213	Stop Time:	2006-316T23:59:54.411
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006317_01

Start Time:	2006-317T00:00:00.040	Stop Time:	2006-317T23:59:59.110
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006318_01

Start Time:	2006-318T00:00:04.735	Stop Time:	2006-318T23:59:59.558
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006319_01

Start Time:	2006-319T00:00:05.183	Stop Time:	2006-319T23:59:54.382
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006320_01

Start Time:	2006-320T00:00:00.007	Stop Time:	2006-320T23:59:59.456
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006321_01

Start Time:	2006-321T00:00:05.081	Stop Time:	2006-321T23:59:59.779
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006322_01

Start Time:	2006-322T00:00:05.404	Stop Time:	2006-322T23:59:54.478
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006323_01

Start Time:	2006-323T00:00:00.103	Stop Time:	2006-323T23:59:54.926
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006324_01

Start Time:	2006-324T00:00:00.551	Stop Time:	2006-324T23:59:58.750
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006325_01

Start Time:	2006-325T00:00:01.563	Stop Time:	2006-325T23:59:54.574
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006326_01

Start Time:	2006-326T00:00:00.199	Stop Time:	2006-326T23:59:57.772
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006327_01

Start Time:	2006-327T00:00:03.397	Stop Time:	2006-327T23:59:57.096
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006328_01

Start Time:	2006-328T00:00:02.721	Stop Time:	2006-328T23:59:56.544
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006329_01

Start Time:	2006-329T00:00:02.169	Stop Time:	2006-329T23:59:56.993
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006330_01

Start Time:	2006-330T00:00:02.618	Stop Time:	2006-330T23:59:58.321
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006331_01

Start Time:	2006-331T00:00:03.942	Stop Time:	2006-331T23:59:59.140
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006332_01

Start Time:	2006-332T00:00:04.769	Stop Time:	2006-332T23:59:59.274
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006333_01

Start Time:	2006-333T00:00:04.899	Stop Time:	2006-333T23:59:55.850
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006334_01

Start Time:	2006-334T00:00:01.475	Stop Time:	2006-334T23:59:54.425
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006335_01

Start Time:	2006-335T00:00:00.050	Stop Time:	2006-335T23:59:59.501
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006336_01

Start Time:	2006-336T00:00:05.126	Stop Time:	2006-336T23:59:56.327
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006337_01

Start Time:	2006-337T00:00:00.077	Stop Time:	2006-337T23:59:59.652
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006338_01

Start Time:	2006-338T00:00:05.277	Stop Time:	2006-338T23:59:57.228
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006339_01

Start Time:	2006-339T00:00:02.853	Stop Time:	2006-339T23:59:56.304
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006340_01

Start Time:	2006-340T00:00:01.929	Stop Time:	2006-340T23:59:54.879
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006341_01

Start Time:	2006-341T00:00:00.504	Stop Time:	2006-341T23:59:59.580
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006342_01

Start Time:	2006-342T00:00:05.205	Stop Time:	2006-342T23:59:56.543
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006343_01

Start Time:	2006-343T00:00:02.168	Stop Time:	2006-343T23:59:59.745
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006344_01

Start Time:	2006-344T00:00:05.370	Stop Time:	2006-344T23:59:59.196
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006345_01

Start Time:	2006-345T00:00:04.821	Stop Time:	2006-345T23:59:59.647
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006346_01

Start Time:	2006-346T00:00:05.272	Stop Time:	2006-346T23:59:54.474
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006347_01

Start Time:	2006-347T00:00:00.099	Stop Time:	2006-347T23:59:55.300
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006348_01

Start Time:	2006-348T00:00:00.925	Stop Time:	2006-348T23:59:59.751
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006349_01

Start Time:	2006-349T00:00:03.501	Stop Time:	2006-349T23:59:58.452
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006350_01

Start Time:	2006-350T00:00:02.202	Stop Time:	2006-350T23:59:59.904
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006351_01

Start Time:	2006-351T00:00:03.654	Stop Time:	2006-351T23:59:57.604
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006352_01

Start Time:	2006-352T00:00:01.354	Stop Time:	2006-352T23:59:59.555
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006353_01

Start Time:	2006-353T00:00:03.305	Stop Time:	2006-353T23:59:59.944
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006354_01

Start Time:	2006-354T00:00:04.632	Stop Time:	2006-354T23:59:56.333
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006355_01

Start Time:	2006-355T00:00:01.021	Stop Time:	2006-355T23:59:58.409
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006356_01

Start Time:	2006-356T00:00:02.159	Stop Time:	2006-356T23:59:56.896
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006357_01

Start Time:	2006-357T00:00:03.208	Stop Time:	2006-357T23:59:56.566
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006358_01

Start Time:	2006-358T00:00:02.187	Stop Time:	2006-358T23:59:59.388
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006359_01

Start Time:	2006-359T00:00:05.013	Stop Time:	2006-359T23:59:56.340
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006360_01

Start Time:	2006-360T00:00:01.965	Stop Time:	2006-360T23:59:58.416
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006361_01

Start Time:	2006-361T00:00:04.041	Stop Time:	2006-361T23:59:58.367
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006362_01

Start Time:	2006-362T00:00:03.992	Stop Time:	2006-362T23:59:59.822
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006363_01

Start Time:	2006-363T00:00:05.443	Stop Time:	2006-363T23:59:56.520
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006364_01

Start Time:	2006-364T00:00:00.270	Stop Time:	2006-364T23:59:56.721
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

LACCFULL0_2006365_01

Start Time:	2006-365T00:00:00.471	Stop Time:	2006-365T23:59:57.172
The data columns contain full time resolution of LEMMS accumulator rates data. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file ( described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. Also included are the active priority channels respective to the datas time interval, and The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. Following the data are columns describing certain geometric parameters such as the position of Cassini in the SZS and SZO frames. Also included are the pitch angle of the LET and HET.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in