PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LACCAVG0_1MIN/ 2015 /

LACCAVG0_1MIN_2015002_02

Start Time:	2015-002T00:00	Stop Time:	2015-003T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015003_02

Start Time:	2015-003T00:00	Stop Time:	2015-004T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015004_02

Start Time:	2015-004T00:00	Stop Time:	2015-005T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015005_02

Start Time:	2015-005T00:00	Stop Time:	2015-006T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015006_02

Start Time:	2015-006T00:00	Stop Time:	2015-007T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015007_02

Start Time:	2015-007T00:00	Stop Time:	2015-008T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015008_02

Start Time:	2015-008T00:00	Stop Time:	2015-009T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015009_02

Start Time:	2015-009T00:00	Stop Time:	2015-010T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015010_02

Start Time:	2015-010T00:00	Stop Time:	2015-011T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015011_02

Start Time:	2015-011T00:00	Stop Time:	2015-012T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015012_02

Start Time:	2015-012T00:00	Stop Time:	2015-013T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015013_02

Start Time:	2015-013T00:00	Stop Time:	2015-014T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015014_02

Start Time:	2015-014T00:00	Stop Time:	2015-015T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015015_02

Start Time:	2015-015T00:00	Stop Time:	2015-016T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015016_02

Start Time:	2015-016T00:00	Stop Time:	2015-017T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015017_02

Start Time:	2015-017T00:00	Stop Time:	2015-018T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015018_02

Start Time:	2015-018T00:00	Stop Time:	2015-019T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015019_02

Start Time:	2015-019T00:00	Stop Time:	2015-020T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015020_02

Start Time:	2015-020T00:00	Stop Time:	2015-021T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015021_02

Start Time:	2015-021T00:00	Stop Time:	2015-022T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015022_02

Start Time:	2015-022T00:00	Stop Time:	2015-023T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015023_02

Start Time:	2015-023T00:00	Stop Time:	2015-024T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015024_02

Start Time:	2015-024T00:00	Stop Time:	2015-025T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015025_02

Start Time:	2015-025T00:00	Stop Time:	2015-026T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015026_02

Start Time:	2015-026T00:00	Stop Time:	2015-027T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015027_02

Start Time:	2015-027T00:00	Stop Time:	2015-028T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015028_02

Start Time:	2015-028T00:00	Stop Time:	2015-029T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015029_02

Start Time:	2015-029T00:00	Stop Time:	2015-030T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015030_02

Start Time:	2015-030T00:00	Stop Time:	2015-031T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015031_02

Start Time:	2015-031T00:00	Stop Time:	2015-032T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015032_02

Start Time:	2015-032T00:00	Stop Time:	2015-033T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015033_02

Start Time:	2015-033T00:00	Stop Time:	2015-034T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015034_02

Start Time:	2015-034T00:00	Stop Time:	2015-035T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015035_02

Start Time:	2015-035T00:00	Stop Time:	2015-036T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015036_02

Start Time:	2015-036T00:00	Stop Time:	2015-037T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015037_02

Start Time:	2015-037T00:00	Stop Time:	2015-038T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015038_02

Start Time:	2015-038T00:00	Stop Time:	2015-039T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015039_02

Start Time:	2015-039T00:00	Stop Time:	2015-040T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015040_02

Start Time:	2015-040T00:00	Stop Time:	2015-041T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015041_02

Start Time:	2015-041T00:00	Stop Time:	2015-042T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015042_02

Start Time:	2015-042T00:00	Stop Time:	2015-043T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015043_02

Start Time:	2015-043T00:00	Stop Time:	2015-044T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015044_02

Start Time:	2015-044T00:00	Stop Time:	2015-045T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015045_02

Start Time:	2015-045T00:00	Stop Time:	2015-046T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015046_02

Start Time:	2015-046T00:00	Stop Time:	2015-047T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015047_02

Start Time:	2015-047T00:00	Stop Time:	2015-048T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015048_02

Start Time:	2015-048T00:00	Stop Time:	2015-049T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015049_02

Start Time:	2015-049T00:00	Stop Time:	2015-050T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015050_02

Start Time:	2015-050T00:00	Stop Time:	2015-051T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015051_02

Start Time:	2015-051T00:00	Stop Time:	2015-052T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015052_02

Start Time:	2015-052T00:00	Stop Time:	2015-053T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015053_02

Start Time:	2015-053T00:00	Stop Time:	2015-054T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015054_02

Start Time:	2015-054T00:00	Stop Time:	2015-055T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015055_02

Start Time:	2015-055T00:00	Stop Time:	2015-056T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015056_02

Start Time:	2015-056T00:00	Stop Time:	2015-057T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015057_02

Start Time:	2015-057T00:00	Stop Time:	2015-058T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015058_02

Start Time:	2015-058T00:00	Stop Time:	2015-059T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015059_02

Start Time:	2015-059T00:00	Stop Time:	2015-060T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015060_02

Start Time:	2015-060T00:00	Stop Time:	2015-061T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015061_02

Start Time:	2015-061T00:00	Stop Time:	2015-062T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015062_02

Start Time:	2015-062T00:00	Stop Time:	2015-063T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015063_02

Start Time:	2015-063T00:00	Stop Time:	2015-064T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015064_02

Start Time:	2015-064T00:00	Stop Time:	2015-065T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015065_02

Start Time:	2015-065T00:00	Stop Time:	2015-066T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015066_02

Start Time:	2015-066T00:00	Stop Time:	2015-067T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015067_02

Start Time:	2015-067T00:00	Stop Time:	2015-068T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015068_02

Start Time:	2015-068T00:00	Stop Time:	2015-069T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015069_02

Start Time:	2015-069T00:00	Stop Time:	2015-070T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015070_02

Start Time:	2015-070T00:00	Stop Time:	2015-071T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015071_02

Start Time:	2015-071T00:00	Stop Time:	2015-072T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015072_02

Start Time:	2015-072T00:00	Stop Time:	2015-073T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015073_02

Start Time:	2015-073T00:00	Stop Time:	2015-074T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015074_02

Start Time:	2015-074T00:00	Stop Time:	2015-075T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015075_02

Start Time:	2015-075T00:00	Stop Time:	2015-076T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015076_02

Start Time:	2015-076T00:00	Stop Time:	2015-077T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015077_02

Start Time:	2015-077T00:00	Stop Time:	2015-078T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015078_02

Start Time:	2015-078T00:00	Stop Time:	2015-079T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015079_02

Start Time:	2015-079T00:00	Stop Time:	2015-080T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015080_02

Start Time:	2015-080T00:00	Stop Time:	2015-081T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015081_02

Start Time:	2015-081T00:00	Stop Time:	2015-082T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015082_02

Start Time:	2015-082T00:00	Stop Time:	2015-083T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015083_02

Start Time:	2015-083T00:00	Stop Time:	2015-084T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015084_02

Start Time:	2015-084T00:00	Stop Time:	2015-085T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015085_02

Start Time:	2015-085T00:00	Stop Time:	2015-086T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015086_02

Start Time:	2015-086T00:00	Stop Time:	2015-087T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015087_02

Start Time:	2015-087T00:00	Stop Time:	2015-088T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015088_02

Start Time:	2015-088T00:00	Stop Time:	2015-089T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015089_02

Start Time:	2015-089T00:00	Stop Time:	2015-090T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015090_02

Start Time:	2015-090T00:00	Stop Time:	2015-091T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015091_02

Start Time:	2015-091T00:00	Stop Time:	2015-092T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015092_02

Start Time:	2015-092T00:00	Stop Time:	2015-093T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015093_02

Start Time:	2015-093T00:00	Stop Time:	2015-094T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015094_02

Start Time:	2015-094T00:00	Stop Time:	2015-095T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015095_02

Start Time:	2015-095T00:00	Stop Time:	2015-096T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015096_02

Start Time:	2015-096T00:00	Stop Time:	2015-097T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015097_02

Start Time:	2015-097T00:00	Stop Time:	2015-098T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015098_02

Start Time:	2015-098T00:00	Stop Time:	2015-099T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015099_02

Start Time:	2015-099T00:00	Stop Time:	2015-100T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015100_02

Start Time:	2015-100T00:00	Stop Time:	2015-101T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015101_02

Start Time:	2015-101T00:00	Stop Time:	2015-102T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015102_02

Start Time:	2015-102T00:00	Stop Time:	2015-103T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015103_02

Start Time:	2015-103T00:00	Stop Time:	2015-104T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015104_02

Start Time:	2015-104T00:00	Stop Time:	2015-105T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015105_02

Start Time:	2015-105T00:00	Stop Time:	2015-106T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015106_02

Start Time:	2015-106T00:00	Stop Time:	2015-107T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015107_02

Start Time:	2015-107T00:00	Stop Time:	2015-108T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015108_02

Start Time:	2015-108T00:00	Stop Time:	2015-109T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015109_02

Start Time:	2015-109T00:00	Stop Time:	2015-110T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015110_02

Start Time:	2015-110T00:00	Stop Time:	2015-111T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015111_02

Start Time:	2015-111T00:00	Stop Time:	2015-112T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015112_02

Start Time:	2015-112T00:00	Stop Time:	2015-113T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015113_02

Start Time:	2015-113T00:00	Stop Time:	2015-114T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015114_02

Start Time:	2015-114T00:00	Stop Time:	2015-115T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015115_02

Start Time:	2015-115T00:00	Stop Time:	2015-116T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015116_02

Start Time:	2015-116T00:00	Stop Time:	2015-117T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015117_02

Start Time:	2015-117T00:00	Stop Time:	2015-118T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015118_02

Start Time:	2015-118T00:00	Stop Time:	2015-119T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015119_02

Start Time:	2015-119T00:00	Stop Time:	2015-120T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015120_02

Start Time:	2015-120T00:00	Stop Time:	2015-121T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015121_02

Start Time:	2015-121T00:00	Stop Time:	2015-122T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015122_02

Start Time:	2015-122T00:00	Stop Time:	2015-123T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015123_02

Start Time:	2015-123T00:00	Stop Time:	2015-124T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015124_02

Start Time:	2015-124T00:00	Stop Time:	2015-125T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015125_02

Start Time:	2015-125T00:00	Stop Time:	2015-126T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015126_02

Start Time:	2015-126T00:00	Stop Time:	2015-127T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015127_02

Start Time:	2015-127T00:00	Stop Time:	2015-128T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015128_02

Start Time:	2015-128T00:00	Stop Time:	2015-129T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015129_02

Start Time:	2015-129T00:00	Stop Time:	2015-130T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015130_02

Start Time:	2015-130T00:00	Stop Time:	2015-131T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015131_02

Start Time:	2015-131T00:00	Stop Time:	2015-132T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015132_02

Start Time:	2015-132T00:00	Stop Time:	2015-133T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015133_02

Start Time:	2015-133T00:00	Stop Time:	2015-134T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015134_02

Start Time:	2015-134T00:00	Stop Time:	2015-135T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015135_02

Start Time:	2015-135T00:00	Stop Time:	2015-136T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015136_02

Start Time:	2015-136T00:00	Stop Time:	2015-137T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015137_02

Start Time:	2015-137T00:00	Stop Time:	2015-138T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015138_02

Start Time:	2015-138T00:00	Stop Time:	2015-139T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015139_02

Start Time:	2015-139T00:00	Stop Time:	2015-140T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015140_02

Start Time:	2015-140T00:00	Stop Time:	2015-141T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015141_02

Start Time:	2015-141T00:00	Stop Time:	2015-142T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015142_02

Start Time:	2015-142T00:00	Stop Time:	2015-143T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015143_02

Start Time:	2015-143T00:00	Stop Time:	2015-144T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015144_02

Start Time:	2015-144T00:00	Stop Time:	2015-145T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015145_02

Start Time:	2015-145T00:00	Stop Time:	2015-146T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015146_02

Start Time:	2015-146T00:00	Stop Time:	2015-147T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015147_02

Start Time:	2015-147T00:00	Stop Time:	2015-148T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015148_02

Start Time:	2015-148T00:00	Stop Time:	2015-149T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015149_02

Start Time:	2015-149T00:00	Stop Time:	2015-150T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015150_02

Start Time:	2015-150T00:00	Stop Time:	2015-151T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015151_02

Start Time:	2015-151T00:00	Stop Time:	2015-152T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015152_02

Start Time:	2015-152T00:00	Stop Time:	2015-153T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015153_02

Start Time:	2015-153T00:00	Stop Time:	2015-154T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015154_02

Start Time:	2015-154T00:00	Stop Time:	2015-155T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015155_02

Start Time:	2015-155T00:00	Stop Time:	2015-156T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015156_02

Start Time:	2015-156T00:00	Stop Time:	2015-157T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015157_02

Start Time:	2015-157T00:00	Stop Time:	2015-158T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015158_02

Start Time:	2015-158T00:00	Stop Time:	2015-159T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015159_02

Start Time:	2015-159T00:00	Stop Time:	2015-160T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015160_02

Start Time:	2015-160T00:00	Stop Time:	2015-161T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015161_02

Start Time:	2015-161T00:00	Stop Time:	2015-162T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015162_02

Start Time:	2015-162T00:00	Stop Time:	2015-163T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015163_02

Start Time:	2015-163T00:00	Stop Time:	2015-164T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015164_02

Start Time:	2015-164T00:00	Stop Time:	2015-165T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015165_02

Start Time:	2015-165T00:00	Stop Time:	2015-166T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015166_02

Start Time:	2015-166T00:00	Stop Time:	2015-167T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015167_02

Start Time:	2015-167T00:00	Stop Time:	2015-168T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015168_02

Start Time:	2015-168T00:00	Stop Time:	2015-169T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015169_02

Start Time:	2015-169T00:00	Stop Time:	2015-170T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015170_02

Start Time:	2015-170T00:00	Stop Time:	2015-171T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015171_02

Start Time:	2015-171T00:00	Stop Time:	2015-172T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015172_02

Start Time:	2015-172T00:00	Stop Time:	2015-173T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015173_02

Start Time:	2015-173T00:00	Stop Time:	2015-174T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015174_02

Start Time:	2015-174T00:00	Stop Time:	2015-175T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015175_02

Start Time:	2015-175T00:00	Stop Time:	2015-176T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015176_02

Start Time:	2015-176T00:00	Stop Time:	2015-177T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015177_02

Start Time:	2015-177T00:00	Stop Time:	2015-178T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015178_02

Start Time:	2015-178T00:00	Stop Time:	2015-179T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015179_02

Start Time:	2015-179T00:00	Stop Time:	2015-180T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015180_02

Start Time:	2015-180T00:00	Stop Time:	2015-181T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015181_02

Start Time:	2015-181T00:00	Stop Time:	2015-182T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015182_02

Start Time:	2015-182T00:00	Stop Time:	2015-183T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015183_02

Start Time:	2015-183T00:00	Stop Time:	2015-184T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015184_02

Start Time:	2015-184T00:00	Stop Time:	2015-185T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015185_02

Start Time:	2015-185T00:00	Stop Time:	2015-186T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015186_02

Start Time:	2015-186T00:00	Stop Time:	2015-187T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015187_02

Start Time:	2015-187T00:00	Stop Time:	2015-188T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015188_02

Start Time:	2015-188T00:00	Stop Time:	2015-189T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015189_02

Start Time:	2015-189T00:00	Stop Time:	2015-190T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015190_02

Start Time:	2015-190T00:00	Stop Time:	2015-191T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015191_02

Start Time:	2015-191T00:00	Stop Time:	2015-192T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015192_02

Start Time:	2015-192T00:00	Stop Time:	2015-193T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015193_02

Start Time:	2015-193T00:00	Stop Time:	2015-194T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015194_02

Start Time:	2015-194T00:00	Stop Time:	2015-195T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015195_02

Start Time:	2015-195T00:00	Stop Time:	2015-196T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015196_02

Start Time:	2015-196T00:00	Stop Time:	2015-197T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015197_02

Start Time:	2015-197T00:00	Stop Time:	2015-198T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015198_02

Start Time:	2015-198T00:00	Stop Time:	2015-199T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015199_02

Start Time:	2015-199T00:00	Stop Time:	2015-200T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015200_02

Start Time:	2015-200T00:00	Stop Time:	2015-201T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015201_02

Start Time:	2015-201T00:00	Stop Time:	2015-202T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015202_02

Start Time:	2015-202T00:00	Stop Time:	2015-203T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015203_02

Start Time:	2015-203T00:00	Stop Time:	2015-204T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015204_02

Start Time:	2015-204T00:00	Stop Time:	2015-205T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015205_02

Start Time:	2015-205T00:00	Stop Time:	2015-206T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015206_02

Start Time:	2015-206T00:00	Stop Time:	2015-207T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015207_02

Start Time:	2015-207T00:00	Stop Time:	2015-208T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015208_02

Start Time:	2015-208T00:00	Stop Time:	2015-209T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015209_02

Start Time:	2015-209T00:00	Stop Time:	2015-210T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015210_02

Start Time:	2015-210T00:00	Stop Time:	2015-211T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015211_02

Start Time:	2015-211T00:00	Stop Time:	2015-212T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015212_02

Start Time:	2015-212T00:00	Stop Time:	2015-213T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015213_02

Start Time:	2015-213T00:00	Stop Time:	2015-214T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015214_02

Start Time:	2015-214T00:00	Stop Time:	2015-215T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015215_02

Start Time:	2015-215T00:00	Stop Time:	2015-216T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015216_02

Start Time:	2015-216T00:00	Stop Time:	2015-217T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015217_02

Start Time:	2015-217T00:00	Stop Time:	2015-218T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015218_02

Start Time:	2015-218T00:00	Stop Time:	2015-219T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015219_02

Start Time:	2015-219T00:00	Stop Time:	2015-220T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015220_02

Start Time:	2015-220T00:00	Stop Time:	2015-221T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015221_02

Start Time:	2015-221T00:00	Stop Time:	2015-222T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015222_02

Start Time:	2015-222T00:00	Stop Time:	2015-223T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015223_02

Start Time:	2015-223T00:00	Stop Time:	2015-224T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015224_02

Start Time:	2015-224T00:00	Stop Time:	2015-225T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015225_02

Start Time:	2015-225T00:00	Stop Time:	2015-226T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015226_02

Start Time:	2015-226T00:00	Stop Time:	2015-227T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015227_02

Start Time:	2015-227T00:00	Stop Time:	2015-228T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015228_02

Start Time:	2015-228T00:00	Stop Time:	2015-229T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015229_02

Start Time:	2015-229T00:00	Stop Time:	2015-230T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015230_02

Start Time:	2015-230T00:00	Stop Time:	2015-231T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015231_02

Start Time:	2015-231T00:00	Stop Time:	2015-232T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015232_02

Start Time:	2015-232T00:00	Stop Time:	2015-233T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015233_02

Start Time:	2015-233T00:00	Stop Time:	2015-234T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015234_02

Start Time:	2015-234T00:00	Stop Time:	2015-235T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015235_02

Start Time:	2015-235T00:00	Stop Time:	2015-236T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015236_02

Start Time:	2015-236T00:00	Stop Time:	2015-237T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015237_02

Start Time:	2015-237T00:00	Stop Time:	2015-238T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015238_02

Start Time:	2015-238T00:00	Stop Time:	2015-239T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015239_02

Start Time:	2015-239T00:00	Stop Time:	2015-240T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015240_02

Start Time:	2015-240T00:00	Stop Time:	2015-241T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015241_02

Start Time:	2015-241T00:00	Stop Time:	2015-242T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015242_02

Start Time:	2015-242T00:00	Stop Time:	2015-243T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015243_02

Start Time:	2015-243T00:00	Stop Time:	2015-244T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015244_02

Start Time:	2015-244T00:00	Stop Time:	2015-245T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015245_02

Start Time:	2015-245T00:00	Stop Time:	2015-246T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015246_02

Start Time:	2015-246T00:00	Stop Time:	2015-247T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015247_02

Start Time:	2015-247T00:00	Stop Time:	2015-248T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015248_02

Start Time:	2015-248T00:00	Stop Time:	2015-249T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015249_02

Start Time:	2015-249T00:00	Stop Time:	2015-250T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015250_02

Start Time:	2015-250T00:00	Stop Time:	2015-251T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015251_02

Start Time:	2015-251T00:00	Stop Time:	2015-252T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015252_02

Start Time:	2015-252T00:00	Stop Time:	2015-253T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015253_02

Start Time:	2015-253T00:00	Stop Time:	2015-254T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015254_02

Start Time:	2015-254T00:00	Stop Time:	2015-255T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015255_02

Start Time:	2015-255T00:00	Stop Time:	2015-256T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015256_02

Start Time:	2015-256T00:00	Stop Time:	2015-257T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015257_02

Start Time:	2015-257T00:00	Stop Time:	2015-258T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015258_02

Start Time:	2015-258T00:00	Stop Time:	2015-259T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015259_02

Start Time:	2015-259T00:00	Stop Time:	2015-260T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015260_02

Start Time:	2015-260T00:00	Stop Time:	2015-261T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015261_02

Start Time:	2015-261T00:00	Stop Time:	2015-262T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015262_02

Start Time:	2015-262T00:00	Stop Time:	2015-263T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015263_02

Start Time:	2015-263T00:00	Stop Time:	2015-264T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015264_02

Start Time:	2015-264T00:00	Stop Time:	2015-265T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015265_02

Start Time:	2015-265T00:00	Stop Time:	2015-266T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015266_02

Start Time:	2015-266T00:00	Stop Time:	2015-267T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015267_02

Start Time:	2015-267T00:00	Stop Time:	2015-268T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015268_02

Start Time:	2015-268T00:00	Stop Time:	2015-269T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015269_02

Start Time:	2015-269T00:00	Stop Time:	2015-270T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015270_02

Start Time:	2015-270T00:00	Stop Time:	2015-271T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015271_02

Start Time:	2015-271T00:00	Stop Time:	2015-272T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015272_02

Start Time:	2015-272T00:00	Stop Time:	2015-273T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015273_02

Start Time:	2015-273T00:00	Stop Time:	2015-274T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015274_02

Start Time:	2015-274T00:00	Stop Time:	2015-275T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015275_02

Start Time:	2015-275T00:00	Stop Time:	2015-276T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015276_02

Start Time:	2015-276T00:00	Stop Time:	2015-277T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015277_02

Start Time:	2015-277T00:00	Stop Time:	2015-278T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015278_02

Start Time:	2015-278T00:00	Stop Time:	2015-279T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015279_02

Start Time:	2015-279T00:00	Stop Time:	2015-280T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015280_02

Start Time:	2015-280T00:00	Stop Time:	2015-281T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015281_02

Start Time:	2015-281T00:00	Stop Time:	2015-282T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015282_02

Start Time:	2015-282T00:00	Stop Time:	2015-283T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015283_02

Start Time:	2015-283T00:00	Stop Time:	2015-284T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015284_02

Start Time:	2015-284T00:00	Stop Time:	2015-285T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015285_02

Start Time:	2015-285T00:00	Stop Time:	2015-286T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015286_02

Start Time:	2015-286T00:00	Stop Time:	2015-287T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015287_02

Start Time:	2015-287T00:00	Stop Time:	2015-288T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015288_02

Start Time:	2015-288T00:00	Stop Time:	2015-289T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015289_02

Start Time:	2015-289T00:00	Stop Time:	2015-290T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015290_02

Start Time:	2015-290T00:00	Stop Time:	2015-291T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015291_02

Start Time:	2015-291T00:00	Stop Time:	2015-292T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015292_02

Start Time:	2015-292T00:00	Stop Time:	2015-293T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015293_02

Start Time:	2015-293T00:00	Stop Time:	2015-294T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015294_02

Start Time:	2015-294T00:00	Stop Time:	2015-295T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015295_02

Start Time:	2015-295T00:00	Stop Time:	2015-296T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015296_02

Start Time:	2015-296T00:00	Stop Time:	2015-297T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015297_02

Start Time:	2015-297T00:00	Stop Time:	2015-298T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015298_02

Start Time:	2015-298T00:00	Stop Time:	2015-299T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015299_02

Start Time:	2015-299T00:00	Stop Time:	2015-300T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015300_02

Start Time:	2015-300T00:00	Stop Time:	2015-301T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015301_02

Start Time:	2015-301T00:00	Stop Time:	2015-302T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015302_02

Start Time:	2015-302T00:00	Stop Time:	2015-303T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015303_02

Start Time:	2015-303T00:00	Stop Time:	2015-304T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015304_02

Start Time:	2015-304T00:00	Stop Time:	2015-305T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015305_02

Start Time:	2015-305T00:00	Stop Time:	2015-306T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015306_02

Start Time:	2015-306T00:00	Stop Time:	2015-307T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015307_02

Start Time:	2015-307T00:00	Stop Time:	2015-308T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015308_02

Start Time:	2015-308T00:00	Stop Time:	2015-309T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015309_02

Start Time:	2015-309T00:00	Stop Time:	2015-310T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015310_02

Start Time:	2015-310T00:00	Stop Time:	2015-311T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015311_02

Start Time:	2015-311T00:00	Stop Time:	2015-312T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015312_02

Start Time:	2015-312T00:00	Stop Time:	2015-313T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015313_02

Start Time:	2015-313T00:00	Stop Time:	2015-314T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015314_02

Start Time:	2015-314T00:00	Stop Time:	2015-315T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015315_02

Start Time:	2015-315T00:00	Stop Time:	2015-316T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015316_02

Start Time:	2015-316T00:00	Stop Time:	2015-317T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015317_02

Start Time:	2015-317T00:00	Stop Time:	2015-318T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015318_02

Start Time:	2015-318T00:00	Stop Time:	2015-319T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015319_02

Start Time:	2015-319T00:00	Stop Time:	2015-320T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015320_02

Start Time:	2015-320T00:00	Stop Time:	2015-321T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015321_02

Start Time:	2015-321T00:00	Stop Time:	2015-322T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015322_02

Start Time:	2015-322T00:00	Stop Time:	2015-323T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015323_02

Start Time:	2015-323T00:00	Stop Time:	2015-324T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015324_02

Start Time:	2015-324T00:00	Stop Time:	2015-325T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015325_02

Start Time:	2015-325T00:00	Stop Time:	2015-326T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015326_02

Start Time:	2015-326T00:00	Stop Time:	2015-327T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015327_02

Start Time:	2015-327T00:00	Stop Time:	2015-328T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015328_02

Start Time:	2015-328T00:00	Stop Time:	2015-329T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015329_02

Start Time:	2015-329T00:00	Stop Time:	2015-330T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015330_02

Start Time:	2015-330T00:00	Stop Time:	2015-331T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015331_02

Start Time:	2015-331T00:00	Stop Time:	2015-332T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015332_02

Start Time:	2015-332T00:00	Stop Time:	2015-333T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015333_02

Start Time:	2015-333T00:00	Stop Time:	2015-334T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015334_02

Start Time:	2015-334T00:00	Stop Time:	2015-335T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015335_02

Start Time:	2015-335T00:00	Stop Time:	2015-336T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015336_02

Start Time:	2015-336T00:00	Stop Time:	2015-337T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015337_02

Start Time:	2015-337T00:00	Stop Time:	2015-338T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015338_02

Start Time:	2015-338T00:00	Stop Time:	2015-339T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015339_02

Start Time:	2015-339T00:00	Stop Time:	2015-340T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015340_02

Start Time:	2015-340T00:00	Stop Time:	2015-341T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015341_02

Start Time:	2015-341T00:00	Stop Time:	2015-342T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015342_02

Start Time:	2015-342T00:00	Stop Time:	2015-343T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015343_02

Start Time:	2015-343T00:00	Stop Time:	2015-344T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015344_02

Start Time:	2015-344T00:00	Stop Time:	2015-345T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015345_02

Start Time:	2015-345T00:00	Stop Time:	2015-346T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015346_02

Start Time:	2015-346T00:00	Stop Time:	2015-347T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015347_02

Start Time:	2015-347T00:00	Stop Time:	2015-348T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015348_02

Start Time:	2015-348T00:00	Stop Time:	2015-349T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015349_02

Start Time:	2015-349T00:00	Stop Time:	2015-350T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015350_02

Start Time:	2015-350T00:00	Stop Time:	2015-351T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015351_02

Start Time:	2015-351T00:00	Stop Time:	2015-352T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015352_02

Start Time:	2015-352T00:00	Stop Time:	2015-353T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015353_02

Start Time:	2015-353T00:00	Stop Time:	2015-354T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015354_02

Start Time:	2015-354T00:00	Stop Time:	2015-355T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015355_02

Start Time:	2015-355T00:00	Stop Time:	2015-356T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015356_02

Start Time:	2015-356T00:00	Stop Time:	2015-357T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015357_02

Start Time:	2015-357T00:00	Stop Time:	2015-358T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015358_02

Start Time:	2015-358T00:00	Stop Time:	2015-359T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015359_02

Start Time:	2015-359T00:00	Stop Time:	2015-360T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015360_02

Start Time:	2015-360T00:00	Stop Time:	2015-361T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015361_02

Start Time:	2015-361T00:00	Stop Time:	2015-362T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015362_02

Start Time:	2015-362T00:00	Stop Time:	2015-363T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015363_02

Start Time:	2015-363T00:00	Stop Time:	2015-364T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015364_02

Start Time:	2015-364T00:00	Stop Time:	2015-365T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2015365_02

Start Time:	2015-365T00:00	Stop Time:	2016-001T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in