PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

This contains calibrated Saturn tour data collected by the LEMMS sensor of the MIMI instrument aboard the Cassini spacecraft for the Cassini mission.

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LACCAVG0_1MIN/ 2013 /

LACCAVG0_1MIN_2013001_02

Start Time:	2013-001T00:00	Stop Time:	2013-002T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013002_02

Start Time:	2013-002T00:00	Stop Time:	2013-003T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013003_02

Start Time:	2013-003T00:00	Stop Time:	2013-004T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013004_02

Start Time:	2013-004T00:00	Stop Time:	2013-005T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013005_02

Start Time:	2013-005T00:00	Stop Time:	2013-006T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013006_02

Start Time:	2013-006T00:00	Stop Time:	2013-007T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013007_02

Start Time:	2013-007T00:00	Stop Time:	2013-008T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013008_02

Start Time:	2013-008T00:00	Stop Time:	2013-009T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013009_02

Start Time:	2013-009T00:00	Stop Time:	2013-010T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013010_02

Start Time:	2013-010T00:00	Stop Time:	2013-011T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013011_02

Start Time:	2013-011T00:00	Stop Time:	2013-012T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013012_02

Start Time:	2013-012T00:00	Stop Time:	2013-013T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013013_02

Start Time:	2013-013T00:00	Stop Time:	2013-014T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013014_02

Start Time:	2013-014T00:00	Stop Time:	2013-015T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013015_02

Start Time:	2013-015T00:00	Stop Time:	2013-016T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013016_02

Start Time:	2013-016T00:00	Stop Time:	2013-017T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013017_02

Start Time:	2013-017T00:00	Stop Time:	2013-018T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013018_02

Start Time:	2013-018T00:00	Stop Time:	2013-019T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013019_02

Start Time:	2013-019T00:00	Stop Time:	2013-020T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013020_02

Start Time:	2013-020T00:00	Stop Time:	2013-021T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013021_02

Start Time:	2013-021T00:00	Stop Time:	2013-022T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013022_02

Start Time:	2013-022T00:00	Stop Time:	2013-023T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013023_02

Start Time:	2013-023T00:00	Stop Time:	2013-024T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013024_02

Start Time:	2013-024T00:00	Stop Time:	2013-025T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013025_02

Start Time:	2013-025T00:00	Stop Time:	2013-026T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013026_02

Start Time:	2013-026T00:00	Stop Time:	2013-027T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013027_02

Start Time:	2013-027T00:00	Stop Time:	2013-028T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013028_02

Start Time:	2013-028T00:00	Stop Time:	2013-029T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013029_02

Start Time:	2013-029T00:00	Stop Time:	2013-030T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013030_02

Start Time:	2013-030T00:00	Stop Time:	2013-031T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013031_02

Start Time:	2013-031T00:00	Stop Time:	2013-032T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013032_02

Start Time:	2013-032T00:00	Stop Time:	2013-033T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013033_02

Start Time:	2013-033T00:00	Stop Time:	2013-034T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013034_02

Start Time:	2013-034T00:00	Stop Time:	2013-035T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013035_02

Start Time:	2013-035T00:00	Stop Time:	2013-036T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013036_02

Start Time:	2013-036T00:00	Stop Time:	2013-037T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013037_02

Start Time:	2013-037T00:00	Stop Time:	2013-038T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013038_02

Start Time:	2013-038T00:00	Stop Time:	2013-039T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013039_02

Start Time:	2013-039T00:00	Stop Time:	2013-040T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013040_02

Start Time:	2013-040T00:00	Stop Time:	2013-041T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013041_02

Start Time:	2013-041T00:00	Stop Time:	2013-042T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013042_02

Start Time:	2013-042T00:00	Stop Time:	2013-043T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013043_02

Start Time:	2013-043T00:00	Stop Time:	2013-044T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013044_02

Start Time:	2013-044T00:00	Stop Time:	2013-045T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013045_02

Start Time:	2013-045T00:00	Stop Time:	2013-046T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013046_02

Start Time:	2013-046T00:00	Stop Time:	2013-047T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013047_02

Start Time:	2013-047T00:00	Stop Time:	2013-048T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013048_02

Start Time:	2013-048T00:00	Stop Time:	2013-049T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013049_02

Start Time:	2013-049T00:00	Stop Time:	2013-050T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013050_02

Start Time:	2013-050T00:00	Stop Time:	2013-051T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013051_02

Start Time:	2013-051T00:00	Stop Time:	2013-052T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013052_02

Start Time:	2013-052T00:00	Stop Time:	2013-053T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013053_02

Start Time:	2013-053T00:00	Stop Time:	2013-054T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013054_02

Start Time:	2013-054T00:00	Stop Time:	2013-055T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013055_02

Start Time:	2013-055T00:00	Stop Time:	2013-056T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013056_02

Start Time:	2013-056T00:00	Stop Time:	2013-057T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013057_02

Start Time:	2013-057T00:00	Stop Time:	2013-058T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013058_02

Start Time:	2013-058T00:00	Stop Time:	2013-059T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013059_02

Start Time:	2013-059T00:00	Stop Time:	2013-060T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013060_02

Start Time:	2013-060T00:00	Stop Time:	2013-061T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013061_02

Start Time:	2013-061T00:00	Stop Time:	2013-062T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013062_02

Start Time:	2013-062T00:00	Stop Time:	2013-063T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013063_02

Start Time:	2013-063T00:00	Stop Time:	2013-064T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013064_02

Start Time:	2013-064T00:00	Stop Time:	2013-065T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013065_02

Start Time:	2013-065T00:00	Stop Time:	2013-066T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013066_02

Start Time:	2013-066T00:00	Stop Time:	2013-067T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013067_02

Start Time:	2013-067T00:00	Stop Time:	2013-068T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013068_02

Start Time:	2013-068T00:00	Stop Time:	2013-069T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013069_02

Start Time:	2013-069T00:00	Stop Time:	2013-070T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013070_02

Start Time:	2013-070T00:00	Stop Time:	2013-071T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013071_02

Start Time:	2013-071T00:00	Stop Time:	2013-072T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013072_02

Start Time:	2013-072T00:00	Stop Time:	2013-073T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013073_02

Start Time:	2013-073T00:00	Stop Time:	2013-074T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013074_02

Start Time:	2013-074T00:00	Stop Time:	2013-075T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013075_02

Start Time:	2013-075T00:00	Stop Time:	2013-076T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013076_02

Start Time:	2013-076T00:00	Stop Time:	2013-077T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013077_02

Start Time:	2013-077T00:00	Stop Time:	2013-078T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013078_02

Start Time:	2013-078T00:00	Stop Time:	2013-079T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013079_02

Start Time:	2013-079T00:00	Stop Time:	2013-080T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013080_02

Start Time:	2013-080T00:00	Stop Time:	2013-081T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013081_02

Start Time:	2013-081T00:00	Stop Time:	2013-082T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013082_02

Start Time:	2013-082T00:00	Stop Time:	2013-083T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013083_02

Start Time:	2013-083T00:00	Stop Time:	2013-084T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013084_02

Start Time:	2013-084T00:00	Stop Time:	2013-085T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013085_02

Start Time:	2013-085T00:00	Stop Time:	2013-086T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013086_02

Start Time:	2013-086T00:00	Stop Time:	2013-087T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013087_02

Start Time:	2013-087T00:00	Stop Time:	2013-088T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013088_02

Start Time:	2013-088T00:00	Stop Time:	2013-089T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013089_02

Start Time:	2013-089T00:00	Stop Time:	2013-090T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013090_02

Start Time:	2013-090T00:00	Stop Time:	2013-091T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013091_02

Start Time:	2013-091T00:00	Stop Time:	2013-092T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013092_02

Start Time:	2013-092T00:00	Stop Time:	2013-093T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013093_02

Start Time:	2013-093T00:00	Stop Time:	2013-094T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013094_02

Start Time:	2013-094T00:00	Stop Time:	2013-095T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013095_02

Start Time:	2013-095T00:00	Stop Time:	2013-096T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013096_02

Start Time:	2013-096T00:00	Stop Time:	2013-097T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013097_02

Start Time:	2013-097T00:00	Stop Time:	2013-098T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013098_02

Start Time:	2013-098T00:00	Stop Time:	2013-099T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013099_02

Start Time:	2013-099T00:00	Stop Time:	2013-100T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013100_02

Start Time:	2013-100T00:00	Stop Time:	2013-101T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013101_02

Start Time:	2013-101T00:00	Stop Time:	2013-102T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013102_02

Start Time:	2013-102T00:00	Stop Time:	2013-103T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013103_02

Start Time:	2013-103T00:00	Stop Time:	2013-104T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013104_02

Start Time:	2013-104T00:00	Stop Time:	2013-105T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013105_02

Start Time:	2013-105T00:00	Stop Time:	2013-106T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013106_02

Start Time:	2013-106T00:00	Stop Time:	2013-107T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013107_02

Start Time:	2013-107T00:00	Stop Time:	2013-108T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013108_02

Start Time:	2013-108T00:00	Stop Time:	2013-109T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013109_02

Start Time:	2013-109T00:00	Stop Time:	2013-110T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013110_02

Start Time:	2013-110T00:00	Stop Time:	2013-111T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013111_02

Start Time:	2013-111T00:00	Stop Time:	2013-112T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013112_02

Start Time:	2013-112T00:00	Stop Time:	2013-113T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013113_02

Start Time:	2013-113T00:00	Stop Time:	2013-114T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013114_02

Start Time:	2013-114T00:00	Stop Time:	2013-115T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013115_02

Start Time:	2013-115T00:00	Stop Time:	2013-116T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013116_02

Start Time:	2013-116T00:00	Stop Time:	2013-117T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013117_02

Start Time:	2013-117T00:00	Stop Time:	2013-118T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013118_02

Start Time:	2013-118T00:00	Stop Time:	2013-119T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013119_02

Start Time:	2013-119T00:00	Stop Time:	2013-120T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013120_02

Start Time:	2013-120T00:00	Stop Time:	2013-121T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013121_02

Start Time:	2013-121T00:00	Stop Time:	2013-122T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013122_02

Start Time:	2013-122T00:00	Stop Time:	2013-123T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013123_02

Start Time:	2013-123T00:00	Stop Time:	2013-124T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013124_02

Start Time:	2013-124T00:00	Stop Time:	2013-125T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013125_02

Start Time:	2013-125T00:00	Stop Time:	2013-126T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013126_02

Start Time:	2013-126T00:00	Stop Time:	2013-127T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013127_02

Start Time:	2013-127T00:00	Stop Time:	2013-128T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013128_02

Start Time:	2013-128T00:00	Stop Time:	2013-129T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013129_02

Start Time:	2013-129T00:00	Stop Time:	2013-130T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013130_02

Start Time:	2013-130T00:00	Stop Time:	2013-131T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013131_02

Start Time:	2013-131T00:00	Stop Time:	2013-132T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013132_02

Start Time:	2013-132T00:00	Stop Time:	2013-133T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013133_02

Start Time:	2013-133T00:00	Stop Time:	2013-134T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013134_02

Start Time:	2013-134T00:00	Stop Time:	2013-135T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013135_02

Start Time:	2013-135T00:00	Stop Time:	2013-136T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013136_02

Start Time:	2013-136T00:00	Stop Time:	2013-137T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013137_02

Start Time:	2013-137T00:00	Stop Time:	2013-138T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013138_02

Start Time:	2013-138T00:00	Stop Time:	2013-139T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013139_02

Start Time:	2013-139T00:00	Stop Time:	2013-140T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013140_02

Start Time:	2013-140T00:00	Stop Time:	2013-141T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013141_02

Start Time:	2013-141T00:00	Stop Time:	2013-142T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013142_02

Start Time:	2013-142T00:00	Stop Time:	2013-143T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013143_02

Start Time:	2013-143T00:00	Stop Time:	2013-144T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013144_02

Start Time:	2013-144T00:00	Stop Time:	2013-145T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013145_02

Start Time:	2013-145T00:00	Stop Time:	2013-146T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013146_02

Start Time:	2013-146T00:00	Stop Time:	2013-147T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013147_02

Start Time:	2013-147T00:00	Stop Time:	2013-148T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013148_02

Start Time:	2013-148T00:00	Stop Time:	2013-149T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013149_02

Start Time:	2013-149T00:00	Stop Time:	2013-150T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013150_02

Start Time:	2013-150T00:00	Stop Time:	2013-151T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013151_02

Start Time:	2013-151T00:00	Stop Time:	2013-152T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013152_02

Start Time:	2013-152T00:00	Stop Time:	2013-153T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013153_02

Start Time:	2013-153T00:00	Stop Time:	2013-154T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013154_02

Start Time:	2013-154T00:00	Stop Time:	2013-155T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013155_02

Start Time:	2013-155T00:00	Stop Time:	2013-156T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013156_02

Start Time:	2013-156T00:00	Stop Time:	2013-157T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013157_02

Start Time:	2013-157T00:00	Stop Time:	2013-158T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013158_02

Start Time:	2013-158T00:00	Stop Time:	2013-159T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013159_02

Start Time:	2013-159T00:00	Stop Time:	2013-160T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013160_02

Start Time:	2013-160T00:00	Stop Time:	2013-161T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013161_02

Start Time:	2013-161T00:00	Stop Time:	2013-162T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013162_02

Start Time:	2013-162T00:00	Stop Time:	2013-163T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013163_02

Start Time:	2013-163T00:00	Stop Time:	2013-164T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013164_02

Start Time:	2013-164T00:00	Stop Time:	2013-165T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013165_02

Start Time:	2013-165T00:00	Stop Time:	2013-166T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013166_02

Start Time:	2013-166T00:00	Stop Time:	2013-167T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013167_02

Start Time:	2013-167T00:00	Stop Time:	2013-168T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013168_02

Start Time:	2013-168T00:00	Stop Time:	2013-169T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013169_02

Start Time:	2013-169T00:00	Stop Time:	2013-170T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013170_02

Start Time:	2013-170T00:00	Stop Time:	2013-171T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013171_02

Start Time:	2013-171T00:00	Stop Time:	2013-172T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013172_02

Start Time:	2013-172T00:00	Stop Time:	2013-173T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013173_02

Start Time:	2013-173T00:00	Stop Time:	2013-174T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013174_02

Start Time:	2013-174T00:00	Stop Time:	2013-175T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013175_02

Start Time:	2013-175T00:00	Stop Time:	2013-176T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013176_02

Start Time:	2013-176T00:00	Stop Time:	2013-177T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013177_02

Start Time:	2013-177T00:00	Stop Time:	2013-178T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013178_02

Start Time:	2013-178T00:00	Stop Time:	2013-179T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013179_02

Start Time:	2013-179T00:00	Stop Time:	2013-180T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013180_02

Start Time:	2013-180T00:00	Stop Time:	2013-181T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013181_02

Start Time:	2013-181T00:00	Stop Time:	2013-182T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013182_02

Start Time:	2013-182T00:00	Stop Time:	2013-183T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013183_02

Start Time:	2013-183T00:00	Stop Time:	2013-184T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013184_02

Start Time:	2013-184T00:00	Stop Time:	2013-185T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013185_02

Start Time:	2013-185T00:00	Stop Time:	2013-186T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013186_02

Start Time:	2013-186T00:00	Stop Time:	2013-187T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013187_02

Start Time:	2013-187T00:00	Stop Time:	2013-188T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013188_02

Start Time:	2013-188T00:00	Stop Time:	2013-189T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013189_02

Start Time:	2013-189T00:00	Stop Time:	2013-190T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013190_02

Start Time:	2013-190T00:00	Stop Time:	2013-191T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013191_02

Start Time:	2013-191T00:00	Stop Time:	2013-192T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013192_02

Start Time:	2013-192T00:00	Stop Time:	2013-193T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013193_02

Start Time:	2013-193T00:00	Stop Time:	2013-194T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013194_02

Start Time:	2013-194T00:00	Stop Time:	2013-195T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013195_02

Start Time:	2013-195T00:00	Stop Time:	2013-196T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013196_02

Start Time:	2013-196T00:00	Stop Time:	2013-197T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013197_02

Start Time:	2013-197T00:00	Stop Time:	2013-198T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013198_02

Start Time:	2013-198T00:00	Stop Time:	2013-199T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013199_02

Start Time:	2013-199T00:00	Stop Time:	2013-200T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013200_02

Start Time:	2013-200T00:00	Stop Time:	2013-201T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013201_02

Start Time:	2013-201T00:00	Stop Time:	2013-202T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013202_02

Start Time:	2013-202T00:00	Stop Time:	2013-203T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013203_02

Start Time:	2013-203T00:00	Stop Time:	2013-204T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013204_02

Start Time:	2013-204T00:00	Stop Time:	2013-205T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013205_02

Start Time:	2013-205T00:00	Stop Time:	2013-206T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013206_02

Start Time:	2013-206T00:00	Stop Time:	2013-207T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013207_02

Start Time:	2013-207T00:00	Stop Time:	2013-208T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013208_02

Start Time:	2013-208T00:00	Stop Time:	2013-209T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013209_02

Start Time:	2013-209T00:00	Stop Time:	2013-210T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013210_02

Start Time:	2013-210T00:00	Stop Time:	2013-211T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013211_02

Start Time:	2013-211T00:00	Stop Time:	2013-212T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013212_02

Start Time:	2013-212T00:00	Stop Time:	2013-213T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013213_02

Start Time:	2013-213T00:00	Stop Time:	2013-214T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013214_02

Start Time:	2013-214T00:00	Stop Time:	2013-215T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013215_02

Start Time:	2013-215T00:00	Stop Time:	2013-216T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013216_02

Start Time:	2013-216T00:00	Stop Time:	2013-217T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013217_02

Start Time:	2013-217T00:00	Stop Time:	2013-218T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013218_02

Start Time:	2013-218T00:00	Stop Time:	2013-219T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013219_02

Start Time:	2013-219T00:00	Stop Time:	2013-220T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013220_02

Start Time:	2013-220T00:00	Stop Time:	2013-221T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013221_02

Start Time:	2013-221T00:00	Stop Time:	2013-222T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013222_02

Start Time:	2013-222T00:00	Stop Time:	2013-223T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013223_02

Start Time:	2013-223T00:00	Stop Time:	2013-224T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013224_02

Start Time:	2013-224T00:00	Stop Time:	2013-225T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013225_02

Start Time:	2013-225T00:00	Stop Time:	2013-226T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013226_02

Start Time:	2013-226T00:00	Stop Time:	2013-227T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013227_02

Start Time:	2013-227T00:00	Stop Time:	2013-228T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013228_02

Start Time:	2013-228T00:00	Stop Time:	2013-229T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013229_02

Start Time:	2013-229T00:00	Stop Time:	2013-230T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013230_02

Start Time:	2013-230T00:00	Stop Time:	2013-231T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013231_02

Start Time:	2013-231T00:00	Stop Time:	2013-232T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013232_02

Start Time:	2013-232T00:00	Stop Time:	2013-233T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013233_02

Start Time:	2013-233T00:00	Stop Time:	2013-234T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013234_02

Start Time:	2013-234T00:00	Stop Time:	2013-235T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013235_02

Start Time:	2013-235T00:00	Stop Time:	2013-236T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013236_02

Start Time:	2013-236T00:00	Stop Time:	2013-237T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013237_02

Start Time:	2013-237T00:00	Stop Time:	2013-238T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013238_02

Start Time:	2013-238T00:00	Stop Time:	2013-239T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013239_02

Start Time:	2013-239T00:00	Stop Time:	2013-240T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013240_02

Start Time:	2013-240T00:00	Stop Time:	2013-241T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013241_02

Start Time:	2013-241T00:00	Stop Time:	2013-242T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013242_02

Start Time:	2013-242T00:00	Stop Time:	2013-243T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013243_02

Start Time:	2013-243T00:00	Stop Time:	2013-244T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013244_02

Start Time:	2013-244T00:00	Stop Time:	2013-245T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013245_02

Start Time:	2013-245T00:00	Stop Time:	2013-246T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013246_02

Start Time:	2013-246T00:00	Stop Time:	2013-247T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013247_02

Start Time:	2013-247T00:00	Stop Time:	2013-248T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013248_02

Start Time:	2013-248T00:00	Stop Time:	2013-249T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013249_02

Start Time:	2013-249T00:00	Stop Time:	2013-250T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013250_02

Start Time:	2013-250T00:00	Stop Time:	2013-251T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013251_02

Start Time:	2013-251T00:00	Stop Time:	2013-252T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013252_02

Start Time:	2013-252T00:00	Stop Time:	2013-253T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013253_02

Start Time:	2013-253T00:00	Stop Time:	2013-254T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013254_02

Start Time:	2013-254T00:00	Stop Time:	2013-255T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013255_02

Start Time:	2013-255T00:00	Stop Time:	2013-256T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013256_02

Start Time:	2013-256T00:00	Stop Time:	2013-257T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013257_02

Start Time:	2013-257T00:00	Stop Time:	2013-258T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013258_02

Start Time:	2013-258T00:00	Stop Time:	2013-259T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013259_02

Start Time:	2013-259T00:00	Stop Time:	2013-260T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013260_02

Start Time:	2013-260T00:00	Stop Time:	2013-261T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013261_02

Start Time:	2013-261T00:00	Stop Time:	2013-262T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013262_02

Start Time:	2013-262T00:00	Stop Time:	2013-263T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013263_02

Start Time:	2013-263T00:00	Stop Time:	2013-264T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013264_02

Start Time:	2013-264T00:00	Stop Time:	2013-265T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013265_02

Start Time:	2013-265T00:00	Stop Time:	2013-266T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013266_02

Start Time:	2013-266T00:00	Stop Time:	2013-267T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013267_02

Start Time:	2013-267T00:00	Stop Time:	2013-268T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013268_02

Start Time:	2013-268T00:00	Stop Time:	2013-269T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013269_02

Start Time:	2013-269T00:00	Stop Time:	2013-270T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013270_02

Start Time:	2013-270T00:00	Stop Time:	2013-271T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013271_02

Start Time:	2013-271T00:00	Stop Time:	2013-272T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013272_02

Start Time:	2013-272T00:00	Stop Time:	2013-273T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013273_02

Start Time:	2013-273T00:00	Stop Time:	2013-274T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013274_02

Start Time:	2013-274T00:00	Stop Time:	2013-275T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013275_02

Start Time:	2013-275T00:00	Stop Time:	2013-276T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013276_02

Start Time:	2013-276T00:00	Stop Time:	2013-277T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013277_02

Start Time:	2013-277T00:00	Stop Time:	2013-278T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013278_02

Start Time:	2013-278T00:00	Stop Time:	2013-279T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013279_02

Start Time:	2013-279T00:00	Stop Time:	2013-280T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013280_02

Start Time:	2013-280T00:00	Stop Time:	2013-281T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013281_02

Start Time:	2013-281T00:00	Stop Time:	2013-282T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013282_02

Start Time:	2013-282T00:00	Stop Time:	2013-283T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013283_02

Start Time:	2013-283T00:00	Stop Time:	2013-284T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013284_02

Start Time:	2013-284T00:00	Stop Time:	2013-285T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013285_02

Start Time:	2013-285T00:00	Stop Time:	2013-286T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013286_02

Start Time:	2013-286T00:00	Stop Time:	2013-287T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013287_02

Start Time:	2013-287T00:00	Stop Time:	2013-288T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013288_02

Start Time:	2013-288T00:00	Stop Time:	2013-289T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013289_02

Start Time:	2013-289T00:00	Stop Time:	2013-290T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013290_02

Start Time:	2013-290T00:00	Stop Time:	2013-291T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013291_02

Start Time:	2013-291T00:00	Stop Time:	2013-292T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013292_02

Start Time:	2013-292T00:00	Stop Time:	2013-293T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013293_02

Start Time:	2013-293T00:00	Stop Time:	2013-294T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013294_02

Start Time:	2013-294T00:00	Stop Time:	2013-295T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013295_02

Start Time:	2013-295T00:00	Stop Time:	2013-296T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013296_02

Start Time:	2013-296T00:00	Stop Time:	2013-297T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013297_02

Start Time:	2013-297T00:00	Stop Time:	2013-298T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013298_02

Start Time:	2013-298T00:00	Stop Time:	2013-299T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013299_02

Start Time:	2013-299T00:00	Stop Time:	2013-300T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013300_02

Start Time:	2013-300T00:00	Stop Time:	2013-301T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013301_02

Start Time:	2013-301T00:00	Stop Time:	2013-302T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013302_02

Start Time:	2013-302T00:00	Stop Time:	2013-303T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013303_02

Start Time:	2013-303T00:00	Stop Time:	2013-304T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013304_02

Start Time:	2013-304T00:00	Stop Time:	2013-305T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013305_02

Start Time:	2013-305T00:00	Stop Time:	2013-306T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013306_02

Start Time:	2013-306T00:00	Stop Time:	2013-307T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013307_02

Start Time:	2013-307T00:00	Stop Time:	2013-308T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013308_02

Start Time:	2013-308T00:00	Stop Time:	2013-309T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013309_02

Start Time:	2013-309T00:00	Stop Time:	2013-310T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013310_02

Start Time:	2013-310T00:00	Stop Time:	2013-311T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013311_02

Start Time:	2013-311T00:00	Stop Time:	2013-312T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013312_02

Start Time:	2013-312T00:00	Stop Time:	2013-313T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013313_02

Start Time:	2013-313T00:00	Stop Time:	2013-314T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013314_02

Start Time:	2013-314T00:00	Stop Time:	2013-315T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013315_02

Start Time:	2013-315T00:00	Stop Time:	2013-316T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013316_02

Start Time:	2013-316T00:00	Stop Time:	2013-317T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013317_02

Start Time:	2013-317T00:00	Stop Time:	2013-318T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013318_02

Start Time:	2013-318T00:00	Stop Time:	2013-319T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013319_02

Start Time:	2013-319T00:00	Stop Time:	2013-320T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013320_02

Start Time:	2013-320T00:00	Stop Time:	2013-321T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013321_02

Start Time:	2013-321T00:00	Stop Time:	2013-322T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013322_02

Start Time:	2013-322T00:00	Stop Time:	2013-323T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013323_02

Start Time:	2013-323T00:00	Stop Time:	2013-324T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013324_02

Start Time:	2013-324T00:00	Stop Time:	2013-325T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013325_02

Start Time:	2013-325T00:00	Stop Time:	2013-326T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013326_02

Start Time:	2013-326T00:00	Stop Time:	2013-327T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013327_02

Start Time:	2013-327T00:00	Stop Time:	2013-328T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013328_02

Start Time:	2013-328T00:00	Stop Time:	2013-329T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013329_02

Start Time:	2013-329T00:00	Stop Time:	2013-330T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013330_02

Start Time:	2013-330T00:00	Stop Time:	2013-331T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013331_02

Start Time:	2013-331T00:00	Stop Time:	2013-332T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013332_02

Start Time:	2013-332T00:00	Stop Time:	2013-333T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013333_02

Start Time:	2013-333T00:00	Stop Time:	2013-334T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013334_02

Start Time:	2013-334T00:00	Stop Time:	2013-335T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013335_02

Start Time:	2013-335T00:00	Stop Time:	2013-336T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013336_02

Start Time:	2013-336T00:00	Stop Time:	2013-337T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013337_02

Start Time:	2013-337T00:00	Stop Time:	2013-338T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013338_02

Start Time:	2013-338T00:00	Stop Time:	2013-339T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013339_02

Start Time:	2013-339T00:00	Stop Time:	2013-340T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013340_02

Start Time:	2013-340T00:00	Stop Time:	2013-341T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013341_02

Start Time:	2013-341T00:00	Stop Time:	2013-342T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013342_02

Start Time:	2013-342T00:00	Stop Time:	2013-343T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013343_02

Start Time:	2013-343T00:00	Stop Time:	2013-344T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013344_02

Start Time:	2013-344T00:00	Stop Time:	2013-345T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013345_02

Start Time:	2013-345T00:00	Stop Time:	2013-346T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013346_02

Start Time:	2013-346T00:00	Stop Time:	2013-347T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013347_02

Start Time:	2013-347T00:00	Stop Time:	2013-348T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013348_02

Start Time:	2013-348T00:00	Stop Time:	2013-349T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013349_02

Start Time:	2013-349T00:00	Stop Time:	2013-350T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013350_02

Start Time:	2013-350T00:00	Stop Time:	2013-351T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013351_02

Start Time:	2013-351T00:00	Stop Time:	2013-352T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013352_02

Start Time:	2013-352T00:00	Stop Time:	2013-353T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013353_02

Start Time:	2013-353T00:00	Stop Time:	2013-354T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013354_02

Start Time:	2013-354T00:00	Stop Time:	2013-355T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013355_02

Start Time:	2013-355T00:00	Stop Time:	2013-356T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013356_02

Start Time:	2013-356T00:00	Stop Time:	2013-357T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013357_02

Start Time:	2013-357T00:00	Stop Time:	2013-358T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013358_02

Start Time:	2013-358T00:00	Stop Time:	2013-359T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013359_02

Start Time:	2013-359T00:00	Stop Time:	2013-360T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013360_02

Start Time:	2013-360T00:00	Stop Time:	2013-361T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013361_02

Start Time:	2013-361T00:00	Stop Time:	2013-362T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013362_02

Start Time:	2013-362T00:00	Stop Time:	2013-363T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013363_02

Start Time:	2013-363T00:00	Stop Time:	2013-364T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013364_02

Start Time:	2013-364T00:00	Stop Time:	2013-365T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LACCAVG0_1MIN_2013365_02

Start Time:	2013-365T00:00	Stop Time:	2014-001T00:00
The data columns contain 1 minute averages of LEMMS accumulator rates data. The data are averaged by first defining fixed one minute intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are four types of channels included in these averages. The channels A0 through A8 are measured by the low energy end of LEMMS (the Low Energy Telescope, or LET), and for protons these channels have an energy range of 27 to 4000 keV. The P1 through P9 channels capture protons as measured by the LEMMS High Energy Telescope (HET) and have an energy range of 1 to 60 MeV. Channels C0 through C7 measure electrons, and have an energy of 20 to 900 keV. The E0 through E4 channels are also electrons covering the 150 to 3000 keV range. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in