PDS/PPI Home Page

QUICK SEARCH

Search By Missions

QUICK LINKS

FAQ
Citation Policy
Errata for all volumes
Help for Data Users
Help for Data Reviewers
Help for Data Providers

PDS NODES

PDS Home
Atmospheres
Geosciences
Cartography and Imaging Sciences
NAIF - SPICE
Ring-Moon Systems
Small Bodies

Cassini >> MIMI

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
CO-S-MIMI-4-LEMMS-CALIB-V1.0	PDS 3 CERTIFIED

Start Time: 2004-01-01 08:00:00 - Stop Time: 2017-09-16 10:00:00

CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE

Citiation Information

Author	Vandegriff J., Kusterer M.B.
Title	CASSINI SATURN MIMI LEMMS CALIBRATED DATA ARCHIVE
Publisher	NASA Planetary Data System
Publication Year	2018
doi	https://doi.org/10.17189/1519608

Top/ DATA/ LPHAAVG0_1HR/ 2005 /

LPHAAVG0_1HR_2005001_01

Start Time:	2005-001T00:00	Stop Time:	2005-002T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005002_01

Start Time:	2005-002T00:00	Stop Time:	2005-003T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005003_01

Start Time:	2005-003T00:00	Stop Time:	2005-004T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005004_01

Start Time:	2005-004T00:00	Stop Time:	2005-005T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005005_01

Start Time:	2005-005T00:00	Stop Time:	2005-006T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005006_01

Start Time:	2005-006T00:00	Stop Time:	2005-007T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005015_01

Start Time:	2005-015T00:00	Stop Time:	2005-016T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005016_01

Start Time:	2005-016T00:00	Stop Time:	2005-017T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005017_01

Start Time:	2005-017T00:00	Stop Time:	2005-018T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005018_01

Start Time:	2005-018T00:00	Stop Time:	2005-019T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005019_01

Start Time:	2005-019T00:00	Stop Time:	2005-020T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005020_01

Start Time:	2005-020T00:00	Stop Time:	2005-021T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005021_01

Start Time:	2005-021T00:00	Stop Time:	2005-022T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005022_01

Start Time:	2005-022T00:00	Stop Time:	2005-023T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005023_01

Start Time:	2005-023T00:00	Stop Time:	2005-024T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005024_01

Start Time:	2005-024T00:00	Stop Time:	2005-025T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005025_01

Start Time:	2005-025T00:00	Stop Time:	2005-026T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005026_01

Start Time:	2005-026T00:00	Stop Time:	2005-027T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005027_01

Start Time:	2005-027T00:00	Stop Time:	2005-028T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005028_01

Start Time:	2005-028T00:00	Stop Time:	2005-029T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005029_01

Start Time:	2005-029T00:00	Stop Time:	2005-030T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005030_01

Start Time:	2005-030T00:00	Stop Time:	2005-031T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005031_01

Start Time:	2005-031T00:00	Stop Time:	2005-032T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005032_01

Start Time:	2005-032T00:00	Stop Time:	2005-033T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005033_01

Start Time:	2005-033T00:00	Stop Time:	2005-034T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005034_01

Start Time:	2005-034T00:00	Stop Time:	2005-035T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005035_01

Start Time:	2005-035T00:00	Stop Time:	2005-036T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005036_01

Start Time:	2005-036T00:00	Stop Time:	2005-037T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005037_01

Start Time:	2005-037T00:00	Stop Time:	2005-038T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005038_01

Start Time:	2005-038T00:00	Stop Time:	2005-039T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005039_01

Start Time:	2005-039T00:00	Stop Time:	2005-040T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005040_01

Start Time:	2005-040T00:00	Stop Time:	2005-041T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005041_01

Start Time:	2005-041T00:00	Stop Time:	2005-042T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005042_01

Start Time:	2005-042T00:00	Stop Time:	2005-043T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005043_01

Start Time:	2005-043T00:00	Stop Time:	2005-044T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005044_01

Start Time:	2005-044T00:00	Stop Time:	2005-045T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005045_01

Start Time:	2005-045T00:00	Stop Time:	2005-046T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005046_01

Start Time:	2005-046T00:00	Stop Time:	2005-047T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005047_01

Start Time:	2005-047T00:00	Stop Time:	2005-048T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005048_01

Start Time:	2005-048T00:00	Stop Time:	2005-049T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005049_01

Start Time:	2005-049T00:00	Stop Time:	2005-050T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005050_01

Start Time:	2005-050T00:00	Stop Time:	2005-051T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005051_01

Start Time:	2005-051T00:00	Stop Time:	2005-052T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005052_01

Start Time:	2005-052T00:00	Stop Time:	2005-053T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005053_01

Start Time:	2005-053T00:00	Stop Time:	2005-054T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005054_01

Start Time:	2005-054T00:00	Stop Time:	2005-055T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005055_01

Start Time:	2005-055T00:00	Stop Time:	2005-056T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005056_01

Start Time:	2005-056T00:00	Stop Time:	2005-057T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005057_01

Start Time:	2005-057T00:00	Stop Time:	2005-058T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005058_01

Start Time:	2005-058T00:00	Stop Time:	2005-059T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005059_01

Start Time:	2005-059T00:00	Stop Time:	2005-060T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005060_01

Start Time:	2005-060T00:00	Stop Time:	2005-061T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005061_01

Start Time:	2005-061T00:00	Stop Time:	2005-062T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005062_01

Start Time:	2005-062T00:00	Stop Time:	2005-063T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005063_01

Start Time:	2005-063T00:00	Stop Time:	2005-064T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005064_01

Start Time:	2005-064T00:00	Stop Time:	2005-065T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005065_01

Start Time:	2005-065T00:00	Stop Time:	2005-066T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005066_01

Start Time:	2005-066T00:00	Stop Time:	2005-067T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005067_01

Start Time:	2005-067T00:00	Stop Time:	2005-068T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005068_01

Start Time:	2005-068T00:00	Stop Time:	2005-069T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005069_01

Start Time:	2005-069T00:00	Stop Time:	2005-070T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005070_01

Start Time:	2005-070T00:00	Stop Time:	2005-071T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005071_01

Start Time:	2005-071T00:00	Stop Time:	2005-072T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005072_01

Start Time:	2005-072T00:00	Stop Time:	2005-073T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005073_01

Start Time:	2005-073T00:00	Stop Time:	2005-074T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005074_01

Start Time:	2005-074T00:00	Stop Time:	2005-075T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005075_01

Start Time:	2005-075T00:00	Stop Time:	2005-076T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005076_01

Start Time:	2005-076T00:00	Stop Time:	2005-077T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005077_01

Start Time:	2005-077T00:00	Stop Time:	2005-078T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005078_01

Start Time:	2005-078T00:00	Stop Time:	2005-079T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005079_01

Start Time:	2005-079T00:00	Stop Time:	2005-080T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005080_01

Start Time:	2005-080T00:00	Stop Time:	2005-081T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005081_01

Start Time:	2005-081T00:00	Stop Time:	2005-082T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005082_01

Start Time:	2005-082T00:00	Stop Time:	2005-083T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005083_01

Start Time:	2005-083T00:00	Stop Time:	2005-084T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005084_01

Start Time:	2005-084T00:00	Stop Time:	2005-085T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005085_01

Start Time:	2005-085T00:00	Stop Time:	2005-086T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005086_01

Start Time:	2005-086T00:00	Stop Time:	2005-087T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005087_01

Start Time:	2005-087T00:00	Stop Time:	2005-088T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005088_01

Start Time:	2005-088T00:00	Stop Time:	2005-089T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005089_01

Start Time:	2005-089T00:00	Stop Time:	2005-090T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005090_01

Start Time:	2005-090T00:00	Stop Time:	2005-091T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005091_01

Start Time:	2005-091T00:00	Stop Time:	2005-092T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005092_01

Start Time:	2005-092T00:00	Stop Time:	2005-093T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005093_01

Start Time:	2005-093T00:00	Stop Time:	2005-094T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005094_01

Start Time:	2005-094T00:00	Stop Time:	2005-095T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005095_01

Start Time:	2005-095T00:00	Stop Time:	2005-096T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005096_01

Start Time:	2005-096T00:00	Stop Time:	2005-097T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005097_01

Start Time:	2005-097T00:00	Stop Time:	2005-098T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005098_01

Start Time:	2005-098T00:00	Stop Time:	2005-099T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005099_01

Start Time:	2005-099T00:00	Stop Time:	2005-100T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005100_01

Start Time:	2005-100T00:00	Stop Time:	2005-101T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005101_01

Start Time:	2005-101T00:00	Stop Time:	2005-102T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005102_01

Start Time:	2005-102T00:00	Stop Time:	2005-103T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005103_01

Start Time:	2005-103T00:00	Stop Time:	2005-104T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005104_01

Start Time:	2005-104T00:00	Stop Time:	2005-105T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005105_01

Start Time:	2005-105T00:00	Stop Time:	2005-106T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005106_01

Start Time:	2005-106T00:00	Stop Time:	2005-107T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005107_01

Start Time:	2005-107T00:00	Stop Time:	2005-108T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005108_01

Start Time:	2005-108T00:00	Stop Time:	2005-109T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005109_01

Start Time:	2005-109T00:00	Stop Time:	2005-110T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005110_01

Start Time:	2005-110T00:00	Stop Time:	2005-111T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005111_01

Start Time:	2005-111T00:00	Stop Time:	2005-112T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005112_01

Start Time:	2005-112T00:00	Stop Time:	2005-113T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005113_01

Start Time:	2005-113T00:00	Stop Time:	2005-114T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005114_01

Start Time:	2005-114T00:00	Stop Time:	2005-115T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005115_01

Start Time:	2005-115T00:00	Stop Time:	2005-116T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005116_01

Start Time:	2005-116T00:00	Stop Time:	2005-117T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005117_01

Start Time:	2005-117T00:00	Stop Time:	2005-118T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005118_01

Start Time:	2005-118T00:00	Stop Time:	2005-119T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005119_01

Start Time:	2005-119T00:00	Stop Time:	2005-120T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005120_01

Start Time:	2005-120T00:00	Stop Time:	2005-121T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005121_01

Start Time:	2005-121T00:00	Stop Time:	2005-122T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005122_01

Start Time:	2005-122T00:00	Stop Time:	2005-123T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005123_01

Start Time:	2005-123T00:00	Stop Time:	2005-124T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005124_01

Start Time:	2005-124T00:00	Stop Time:	2005-125T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005125_01

Start Time:	2005-125T00:00	Stop Time:	2005-126T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005126_01

Start Time:	2005-126T00:00	Stop Time:	2005-127T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005127_01

Start Time:	2005-127T00:00	Stop Time:	2005-128T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005128_01

Start Time:	2005-128T00:00	Stop Time:	2005-129T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005129_01

Start Time:	2005-129T00:00	Stop Time:	2005-130T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005130_01

Start Time:	2005-130T00:00	Stop Time:	2005-131T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005131_01

Start Time:	2005-131T00:00	Stop Time:	2005-132T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005132_01

Start Time:	2005-132T00:00	Stop Time:	2005-133T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005133_01

Start Time:	2005-133T00:00	Stop Time:	2005-134T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005134_01

Start Time:	2005-134T00:00	Stop Time:	2005-135T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005135_01

Start Time:	2005-135T00:00	Stop Time:	2005-136T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005136_01

Start Time:	2005-136T00:00	Stop Time:	2005-137T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005137_01

Start Time:	2005-137T00:00	Stop Time:	2005-138T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005138_01

Start Time:	2005-138T00:00	Stop Time:	2005-139T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005139_01

Start Time:	2005-139T00:00	Stop Time:	2005-140T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005140_01

Start Time:	2005-140T00:00	Stop Time:	2005-141T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005141_01

Start Time:	2005-141T00:00	Stop Time:	2005-142T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005142_01

Start Time:	2005-142T00:00	Stop Time:	2005-143T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005143_01

Start Time:	2005-143T00:00	Stop Time:	2005-144T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005144_01

Start Time:	2005-144T00:00	Stop Time:	2005-145T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005145_01

Start Time:	2005-145T00:00	Stop Time:	2005-146T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005146_01

Start Time:	2005-146T00:00	Stop Time:	2005-147T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005147_01

Start Time:	2005-147T00:00	Stop Time:	2005-148T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005148_01

Start Time:	2005-148T00:00	Stop Time:	2005-149T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005149_01

Start Time:	2005-149T00:00	Stop Time:	2005-150T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005150_01

Start Time:	2005-150T00:00	Stop Time:	2005-151T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005151_01

Start Time:	2005-151T00:00	Stop Time:	2005-152T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005152_01

Start Time:	2005-152T00:00	Stop Time:	2005-153T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005153_01

Start Time:	2005-153T00:00	Stop Time:	2005-154T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005154_01

Start Time:	2005-154T00:00	Stop Time:	2005-155T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005155_01

Start Time:	2005-155T00:00	Stop Time:	2005-156T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005156_01

Start Time:	2005-156T00:00	Stop Time:	2005-157T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005157_01

Start Time:	2005-157T00:00	Stop Time:	2005-158T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005158_01

Start Time:	2005-158T00:00	Stop Time:	2005-159T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005159_01

Start Time:	2005-159T00:00	Stop Time:	2005-160T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005160_01

Start Time:	2005-160T00:00	Stop Time:	2005-161T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005161_01

Start Time:	2005-161T00:00	Stop Time:	2005-162T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005162_01

Start Time:	2005-162T00:00	Stop Time:	2005-163T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005163_01

Start Time:	2005-163T00:00	Stop Time:	2005-164T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005164_01

Start Time:	2005-164T00:00	Stop Time:	2005-165T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005165_01

Start Time:	2005-165T00:00	Stop Time:	2005-166T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005166_01

Start Time:	2005-166T00:00	Stop Time:	2005-167T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005167_01

Start Time:	2005-167T00:00	Stop Time:	2005-168T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005168_01

Start Time:	2005-168T00:00	Stop Time:	2005-169T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005169_01

Start Time:	2005-169T00:00	Stop Time:	2005-170T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005170_01

Start Time:	2005-170T00:00	Stop Time:	2005-171T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005171_01

Start Time:	2005-171T00:00	Stop Time:	2005-172T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005172_01

Start Time:	2005-172T00:00	Stop Time:	2005-173T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005173_01

Start Time:	2005-173T00:00	Stop Time:	2005-174T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005174_01

Start Time:	2005-174T00:00	Stop Time:	2005-175T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005175_01

Start Time:	2005-175T00:00	Stop Time:	2005-176T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005176_01

Start Time:	2005-176T00:00	Stop Time:	2005-177T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005177_01

Start Time:	2005-177T00:00	Stop Time:	2005-178T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005178_01

Start Time:	2005-178T00:00	Stop Time:	2005-179T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005179_01

Start Time:	2005-179T00:00	Stop Time:	2005-180T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005180_01

Start Time:	2005-180T00:00	Stop Time:	2005-181T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005181_01

Start Time:	2005-181T00:00	Stop Time:	2005-182T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005182_01

Start Time:	2005-182T00:00	Stop Time:	2005-183T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005183_01

Start Time:	2005-183T00:00	Stop Time:	2005-184T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005184_01

Start Time:	2005-184T00:00	Stop Time:	2005-185T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005185_01

Start Time:	2005-185T00:00	Stop Time:	2005-186T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005186_01

Start Time:	2005-186T00:00	Stop Time:	2005-187T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005187_01

Start Time:	2005-187T00:00	Stop Time:	2005-188T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005188_01

Start Time:	2005-188T00:00	Stop Time:	2005-189T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005189_01

Start Time:	2005-189T00:00	Stop Time:	2005-190T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005190_01

Start Time:	2005-190T00:00	Stop Time:	2005-191T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005191_01

Start Time:	2005-191T00:00	Stop Time:	2005-192T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005192_01

Start Time:	2005-192T00:00	Stop Time:	2005-193T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005193_01

Start Time:	2005-193T00:00	Stop Time:	2005-194T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005194_01

Start Time:	2005-194T00:00	Stop Time:	2005-195T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005195_01

Start Time:	2005-195T00:00	Stop Time:	2005-196T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005196_01

Start Time:	2005-196T00:00	Stop Time:	2005-197T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005197_01

Start Time:	2005-197T00:00	Stop Time:	2005-198T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005198_01

Start Time:	2005-198T00:00	Stop Time:	2005-199T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005199_01

Start Time:	2005-199T00:00	Stop Time:	2005-200T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005200_01

Start Time:	2005-200T00:00	Stop Time:	2005-201T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005201_01

Start Time:	2005-201T00:00	Stop Time:	2005-202T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005202_01

Start Time:	2005-202T00:00	Stop Time:	2005-203T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005203_01

Start Time:	2005-203T00:00	Stop Time:	2005-204T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005204_01

Start Time:	2005-204T00:00	Stop Time:	2005-205T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005205_01

Start Time:	2005-205T00:00	Stop Time:	2005-206T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005206_01

Start Time:	2005-206T00:00	Stop Time:	2005-207T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005207_01

Start Time:	2005-207T00:00	Stop Time:	2005-208T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005208_01

Start Time:	2005-208T00:00	Stop Time:	2005-209T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005209_01

Start Time:	2005-209T00:00	Stop Time:	2005-210T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005210_01

Start Time:	2005-210T00:00	Stop Time:	2005-211T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005211_01

Start Time:	2005-211T00:00	Stop Time:	2005-212T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005212_01

Start Time:	2005-212T00:00	Stop Time:	2005-213T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005213_01

Start Time:	2005-213T00:00	Stop Time:	2005-214T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005214_01

Start Time:	2005-214T00:00	Stop Time:	2005-215T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005215_01

Start Time:	2005-215T00:00	Stop Time:	2005-216T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005216_01

Start Time:	2005-216T00:00	Stop Time:	2005-217T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005217_01

Start Time:	2005-217T00:00	Stop Time:	2005-218T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005218_01

Start Time:	2005-218T00:00	Stop Time:	2005-219T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005219_01

Start Time:	2005-219T00:00	Stop Time:	2005-220T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005220_01

Start Time:	2005-220T00:00	Stop Time:	2005-221T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005221_01

Start Time:	2005-221T00:00	Stop Time:	2005-222T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005222_01

Start Time:	2005-222T00:00	Stop Time:	2005-223T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005223_01

Start Time:	2005-223T00:00	Stop Time:	2005-224T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005224_01

Start Time:	2005-224T00:00	Stop Time:	2005-225T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005225_01

Start Time:	2005-225T00:00	Stop Time:	2005-226T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005226_01

Start Time:	2005-226T00:00	Stop Time:	2005-227T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005227_01

Start Time:	2005-227T00:00	Stop Time:	2005-228T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005228_01

Start Time:	2005-228T00:00	Stop Time:	2005-229T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005229_01

Start Time:	2005-229T00:00	Stop Time:	2005-230T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005230_01

Start Time:	2005-230T00:00	Stop Time:	2005-231T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005231_01

Start Time:	2005-231T00:00	Stop Time:	2005-232T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005232_01

Start Time:	2005-232T00:00	Stop Time:	2005-233T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005233_01

Start Time:	2005-233T00:00	Stop Time:	2005-234T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005234_01

Start Time:	2005-234T00:00	Stop Time:	2005-235T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005235_01

Start Time:	2005-235T00:00	Stop Time:	2005-236T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005236_01

Start Time:	2005-236T00:00	Stop Time:	2005-237T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005237_01

Start Time:	2005-237T00:00	Stop Time:	2005-238T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005238_01

Start Time:	2005-238T00:00	Stop Time:	2005-239T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005239_01

Start Time:	2005-239T00:00	Stop Time:	2005-240T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005240_01

Start Time:	2005-240T00:00	Stop Time:	2005-241T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005241_01

Start Time:	2005-241T00:00	Stop Time:	2005-242T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005242_01

Start Time:	2005-242T00:00	Stop Time:	2005-243T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005243_01

Start Time:	2005-243T00:00	Stop Time:	2005-244T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005244_01

Start Time:	2005-244T00:00	Stop Time:	2005-245T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005245_01

Start Time:	2005-245T00:00	Stop Time:	2005-246T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005246_01

Start Time:	2005-246T00:00	Stop Time:	2005-247T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005247_01

Start Time:	2005-247T00:00	Stop Time:	2005-248T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005248_01

Start Time:	2005-248T00:00	Stop Time:	2005-249T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005249_01

Start Time:	2005-249T00:00	Stop Time:	2005-250T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005250_01

Start Time:	2005-250T00:00	Stop Time:	2005-251T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005251_01

Start Time:	2005-251T00:00	Stop Time:	2005-252T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005252_01

Start Time:	2005-252T00:00	Stop Time:	2005-253T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005253_01

Start Time:	2005-253T00:00	Stop Time:	2005-254T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005254_01

Start Time:	2005-254T00:00	Stop Time:	2005-255T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005255_01

Start Time:	2005-255T00:00	Stop Time:	2005-256T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005256_01

Start Time:	2005-256T00:00	Stop Time:	2005-257T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005257_01

Start Time:	2005-257T00:00	Stop Time:	2005-258T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005258_01

Start Time:	2005-258T00:00	Stop Time:	2005-259T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005259_01

Start Time:	2005-259T00:00	Stop Time:	2005-260T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005260_01

Start Time:	2005-260T00:00	Stop Time:	2005-261T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005261_01

Start Time:	2005-261T00:00	Stop Time:	2005-262T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005262_01

Start Time:	2005-262T00:00	Stop Time:	2005-263T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005263_01

Start Time:	2005-263T00:00	Stop Time:	2005-264T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005264_01

Start Time:	2005-264T00:00	Stop Time:	2005-265T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005265_01

Start Time:	2005-265T00:00	Stop Time:	2005-266T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005266_01

Start Time:	2005-266T00:00	Stop Time:	2005-267T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005267_01

Start Time:	2005-267T00:00	Stop Time:	2005-268T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005268_01

Start Time:	2005-268T00:00	Stop Time:	2005-269T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005269_01

Start Time:	2005-269T00:00	Stop Time:	2005-270T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005270_01

Start Time:	2005-270T00:00	Stop Time:	2005-271T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005271_01

Start Time:	2005-271T00:00	Stop Time:	2005-272T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005272_01

Start Time:	2005-272T00:00	Stop Time:	2005-273T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005273_01

Start Time:	2005-273T00:00	Stop Time:	2005-274T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005274_01

Start Time:	2005-274T00:00	Stop Time:	2005-275T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005275_01

Start Time:	2005-275T00:00	Stop Time:	2005-276T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005276_01

Start Time:	2005-276T00:00	Stop Time:	2005-277T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005277_01

Start Time:	2005-277T00:00	Stop Time:	2005-278T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005278_01

Start Time:	2005-278T00:00	Stop Time:	2005-279T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005279_01

Start Time:	2005-279T00:00	Stop Time:	2005-280T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005280_01

Start Time:	2005-280T00:00	Stop Time:	2005-281T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005281_01

Start Time:	2005-281T00:00	Stop Time:	2005-282T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005282_01

Start Time:	2005-282T00:00	Stop Time:	2005-283T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005283_01

Start Time:	2005-283T00:00	Stop Time:	2005-284T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005284_01

Start Time:	2005-284T00:00	Stop Time:	2005-285T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005285_01

Start Time:	2005-285T00:00	Stop Time:	2005-286T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005286_01

Start Time:	2005-286T00:00	Stop Time:	2005-287T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005287_01

Start Time:	2005-287T00:00	Stop Time:	2005-288T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005288_01

Start Time:	2005-288T00:00	Stop Time:	2005-289T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005289_01

Start Time:	2005-289T00:00	Stop Time:	2005-290T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005290_01

Start Time:	2005-290T00:00	Stop Time:	2005-291T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005291_01

Start Time:	2005-291T00:00	Stop Time:	2005-292T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005292_01

Start Time:	2005-292T00:00	Stop Time:	2005-293T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005293_01

Start Time:	2005-293T00:00	Stop Time:	2005-294T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005294_01

Start Time:	2005-294T00:00	Stop Time:	2005-295T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005295_01

Start Time:	2005-295T00:00	Stop Time:	2005-296T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005296_01

Start Time:	2005-296T00:00	Stop Time:	2005-297T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005297_01

Start Time:	2005-297T00:00	Stop Time:	2005-298T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005298_01

Start Time:	2005-298T00:00	Stop Time:	2005-299T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005299_01

Start Time:	2005-299T00:00	Stop Time:	2005-300T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005300_01

Start Time:	2005-300T00:00	Stop Time:	2005-301T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005301_01

Start Time:	2005-301T00:00	Stop Time:	2005-302T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005302_01

Start Time:	2005-302T00:00	Stop Time:	2005-303T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005303_01

Start Time:	2005-303T00:00	Stop Time:	2005-304T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005304_01

Start Time:	2005-304T00:00	Stop Time:	2005-305T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005305_01

Start Time:	2005-305T00:00	Stop Time:	2005-306T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005306_01

Start Time:	2005-306T00:00	Stop Time:	2005-307T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005307_01

Start Time:	2005-307T00:00	Stop Time:	2005-308T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005308_01

Start Time:	2005-308T00:00	Stop Time:	2005-309T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005309_01

Start Time:	2005-309T00:00	Stop Time:	2005-310T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005310_01

Start Time:	2005-310T00:00	Stop Time:	2005-311T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005311_01

Start Time:	2005-311T00:00	Stop Time:	2005-312T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005312_01

Start Time:	2005-312T00:00	Stop Time:	2005-313T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005313_01

Start Time:	2005-313T00:00	Stop Time:	2005-314T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005314_01

Start Time:	2005-314T00:00	Stop Time:	2005-315T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005315_01

Start Time:	2005-315T00:00	Stop Time:	2005-316T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005316_01

Start Time:	2005-316T00:00	Stop Time:	2005-317T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005317_01

Start Time:	2005-317T00:00	Stop Time:	2005-318T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005318_01

Start Time:	2005-318T00:00	Stop Time:	2005-319T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005319_01

Start Time:	2005-319T00:00	Stop Time:	2005-320T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005320_01

Start Time:	2005-320T00:00	Stop Time:	2005-321T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005321_01

Start Time:	2005-321T00:00	Stop Time:	2005-322T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005322_01

Start Time:	2005-322T00:00	Stop Time:	2005-323T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005323_01

Start Time:	2005-323T00:00	Stop Time:	2005-324T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005324_01

Start Time:	2005-324T00:00	Stop Time:	2005-325T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005325_01

Start Time:	2005-325T00:00	Stop Time:	2005-326T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005326_01

Start Time:	2005-326T00:00	Stop Time:	2005-327T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005327_01

Start Time:	2005-327T00:00	Stop Time:	2005-328T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005328_01

Start Time:	2005-328T00:00	Stop Time:	2005-329T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005329_01

Start Time:	2005-329T00:00	Stop Time:	2005-330T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005330_01

Start Time:	2005-330T00:00	Stop Time:	2005-331T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005331_01

Start Time:	2005-331T00:00	Stop Time:	2005-332T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005332_01

Start Time:	2005-332T00:00	Stop Time:	2005-333T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005333_01

Start Time:	2005-333T00:00	Stop Time:	2005-334T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005334_01

Start Time:	2005-334T00:00	Stop Time:	2005-335T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005335_01

Start Time:	2005-335T00:00	Stop Time:	2005-336T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005336_01

Start Time:	2005-336T00:00	Stop Time:	2005-337T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005337_01

Start Time:	2005-337T00:00	Stop Time:	2005-338T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005338_01

Start Time:	2005-338T00:00	Stop Time:	2005-339T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005339_01

Start Time:	2005-339T00:00	Stop Time:	2005-340T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005340_01

Start Time:	2005-340T00:00	Stop Time:	2005-341T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005341_01

Start Time:	2005-341T00:00	Stop Time:	2005-342T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005342_01

Start Time:	2005-342T00:00	Stop Time:	2005-343T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005343_01

Start Time:	2005-343T00:00	Stop Time:	2005-344T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005344_01

Start Time:	2005-344T00:00	Stop Time:	2005-345T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005345_01

Start Time:	2005-345T00:00	Stop Time:	2005-346T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005346_01

Start Time:	2005-346T00:00	Stop Time:	2005-347T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005347_01

Start Time:	2005-347T00:00	Stop Time:	2005-348T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005348_01

Start Time:	2005-348T00:00	Stop Time:	2005-349T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005349_01

Start Time:	2005-349T00:00	Stop Time:	2005-350T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005350_01

Start Time:	2005-350T00:00	Stop Time:	2005-351T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005351_01

Start Time:	2005-351T00:00	Stop Time:	2005-352T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005352_01

Start Time:	2005-352T00:00	Stop Time:	2005-353T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005353_01

Start Time:	2005-353T00:00	Stop Time:	2005-354T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005354_01

Start Time:	2005-354T00:00	Stop Time:	2005-355T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005355_01

Start Time:	2005-355T00:00	Stop Time:	2005-356T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005356_01

Start Time:	2005-356T00:00	Stop Time:	2005-357T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005357_01

Start Time:	2005-357T00:00	Stop Time:	2005-358T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005358_01

Start Time:	2005-358T00:00	Stop Time:	2005-359T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005359_01

Start Time:	2005-359T00:00	Stop Time:	2005-360T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005360_01

Start Time:	2005-360T00:00	Stop Time:	2005-361T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005361_01

Start Time:	2005-361T00:00	Stop Time:	2005-362T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005362_01

Start Time:	2005-362T00:00	Stop Time:	2005-363T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005363_01

Start Time:	2005-363T00:00	Stop Time:	2005-364T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005364_01

Start Time:	2005-364T00:00	Stop Time:	2005-365T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

LPHAAVG0_1HR_2005365_01

Start Time:	2005-365T00:00	Stop Time:	2006-001T00:00
The data columns contain 1 hour averages of LEMMS PHA data. The data are averaged by first defining fixed one hour intervals throughout the day and then averaging any data points that fall in the intervals. If an interval contains no data, it is still listed in the file, but all data intensity values will be fill. The fill value for data in this file is -1.0E38. These data are background subtracted, and thus occasionally there will be negative values when the count rate falls below the background level. Also, the uncertainties are based on the counting statistics, and thus because of the background subtraction, the uncertainties can be larger than the data value. The background levels change over time and each channel's background level as a function of time in counts/sec is listed in the MIMI calibration file (described in the MIMI Data User Guide, the SIS for this dataset, and also in SIS for the uncalibrated MIMI data). There are three types of channels included in these averages: the A channels, the E channels and the F1 channels. The A channels measure ions, mostly protons. The E and F1 channels measure electrons. The MIMI instrument paper describes these channels, as does the MIMI Data User Guide. For the A channels, channel indices 8 through 62 are present (energies of 26-758 keV). For the E channels, indices 15 to 62 (20-410 keV), and for F1, 26 through 59 (206-1717 keV). Note that a subset of the available PHA channels are typically used for science analysis, and only these channels are plotted here. The dataset catalog file details the reasons for this. Essentially, the efficiencies are unknown or uncertain for omitted channels. The file header and leading columns of the file are present to make the format consistent with other MIMI data in the PDS. Note that much of the values for the leading columns are -1, indicating that they do not have useful values, but their presence allows this file to be parsed by the same code that reads other MIMI PDS data. The first column is always the string 'sci', the next column is a UTC string, and then these prefix columns have no data in them but are just there to preserve the format: UTC SCLOCK Start_Ephemeris_s End_Ephemeris_s Spin_Counter Sector Start_Sector_Sclock_major Subsector Microsectors_Covered Spin_Period_s Staring Sensor_Bitrate Just before the data columns are three columns giving the position of the Cassini spacecraft relavtive to Saturn in the SZS frame. The position is given for the middle of the time interval. The units are Saturn radii (60268 km) and the SZS frame is defined as: +Z is Saturn spin axis, +Y is +Z cross the Saturn-Sun line, and +X is +Y cross +Z.

ICON LEGEND
For links to data holdings various icons are used to represent services or actions you can take. Those icons are:
	Order the volume (CD-ROM/DVD) containing the listed data. The volume will be mailed to you.	The volume (CD-ROM/DVD) contains some errors which are documented in an errata log.
	Launch a custom web browser for the resource.	Launch a map based browser for the resource.
	Toggle viewing into brief mode (shorter descriptions are displayed).	Toggle viewing into expanded mode (longer descriptions are displayed).
	Download the volume containing the listed data.

NEW RELEASES

More.....

PDS RESOURCES

Archive Planning Guide
      Individuals
      Missions
Data Dictionary Search
      Lookup Tool
      Document
PDS4 Standards Documents
PDS Subscription Service

PDS3 Standards

OTHER RESOURCES

ADS Search
Science Data Licenses

	Search For:

	in