PDS_VERSION_ID = PDS3
DATA_SET_ID = "GO-J-PWS-2-EDR-WAVEFORM-10KHZ-V1.0"
RECORD_TYPE = STREAM
OBJECT = TEXT
PUBLICATION_DATE = 2007-02-28
NOTE = "ERRATA.TXT reflects any known deficiencies
with files contained on volume GOPWS_9005."
END_OBJECT = TEXT
END
Non-Standard Practices
The PDS standards do not specify where to store the required MD5 checksum
file for a volume. We have placed it in the root dircetory of the volume
with the file name "CHECKSUMS.TXT". This may be considered invalid by some
verifiers.
The labels for the browse files associated with the
GO-J-PWS-2-EDR-WAVEFORM-1KHZ-V1.0 and GO-J-PWS-2-EDR-WAVEFORM-10KHZ-V1.0
datasets in volumes GOMW_5002, GOMW_5004 and GOMW_5005 incorrectly listed the
DATA_SET_ID as GO-J-PWS-2-REDR-RTS-SA-FULL-V1.0. This problem was detected
and corrected in June 2012.
ERRATA
This file contains a list of all deficiencies and irregularities that are
known to exist at the time of production of this volume.
The files referred to in the ^description pointer in all label files
do not exist as named. They exist in the /DOCUMENT directory or one of
its subdirectories, most likely /DOCUMENT/PROJECT. These files were
listed for their usefulness as documentation.
In the /DOCUMENT/PROJECT directory, each sub-directory contains documents
in Adobe PDF and ASCII text format. The ASCII text version of these
documents are direct conversions of the PDF files. The ASCII versions are
present to comply with PDS standards. In some cases these ASCII versions
have been hand edited to insure their legibility. In many cases, however,
this effort has not been made. It is highly recommended that the PDF
versions be used when reading these documents, as ASCII has limitations
that may prevent proper representation of the original format of these
papers. In cases where the ASCII version must be used, note that many of
these files may exceed the 80 column page width. It is advisable,
therefore, to print any hardcopy of these documents in landscape mode.
All PWS waveform data files contain an attached header that looks like a
PDS label but does not conform to current PDS standards. Users should
ignore this label and refer to the detached PDS labels that are provided.
1) New Static Standard Values
PRODUCT_TYPE {DATA, GEOMETRY, CALIBRATION, DOCUMENT,
CATALOG, SOFTWARE ANCILLARY, QLOOK_PLOT}
HEADER object with HEADER_TYPE = TEXT.
2) Other non-standard practices
OBSERVATION_ID Formation does not comply with the formation rule
specified in the PDSDD for Galileo data sets. The PDSDD
definition is imaging specific.
^DESCRIPTION in PDS minimum labels points to the PDS label of the
controling document(s) rather than the ascii version
in the document directory as required by the standards.
DOCUMENT/*.TXT files might be described as ASCII text documents which
would normally have a .ASC extension. In order to be
more easily accessible to users, these files have been
renamed with a .TXT extension.
DOCUMENT/PROJECT/AR_SEF Uplink products included are stored in the
DOCUMENT dir.
DOCUMENT/PROJECT/AR_SEF/XXXXX Files have PDS minimum labels that point to
SEF_SIS which is located in the DOCUMENT/PROJECT/AR_SEF/
directory rather than in DOCUMENT as required by the
standards.
DOCUMENT/PROJECT - Many documents have unusable ASCII forms created by
PDF-❯ASCII converters. Doesn't comply with PDS standards.
|